The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 10 of 19 « First 56789 10 1112131415 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   Blood Sweat and Tears.. 67 Build Thread (https://67-72chevytrucks.com/vboard/showthread.php?t=651356)

Possmguts 03-06-2016 09:24 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Quote:
Originally Posted by swamp rat (Post 7512273)
Or just make it where they don't drop as far, still would have the same effect.
As it is with that radiator... if I did that, they would only be about and inch deep... This radiator was just something the PO tossed in at some point and it didn't fit right anyway. Was too tall and not wide enough. I'm gonna look for a shorter radiator and then if I have to ill do something with the mounts. No need to do all that other stuff I said about the scoops... they will stay like they are and just get the opening cut into them.

roushinator 03-10-2016 04:24 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Nice work. I was thinking about doing something like that to my hood.

Possmguts 03-11-2016 10:30 AM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Quote:
Originally Posted by roushinator (Post 7517539)
Nice work. I was thinking about doing something like that to my hood.
Thanks.. Gonna try to finish up this weekend... just got back in town at 2:30 this morning.

Quote:
Originally Posted by swamp rat (Post 7512273)
Or just make it where they don't drop as far, still would have the same effect.
I've already started the finish work on it... I'm just going to finish up and move on. I'm sure I will find something that works with it...

Possmguts 03-11-2016 12:56 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
1 Attachment(s)
On another note... I came home to find a nice shiny new set of stainless headers waiting on me :)

Possmguts 03-12-2016 02:14 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
5 Attachment(s)
More pics of the good times... undoing work done the wrong way to redo it the right way... Probably should have done this part of the hood first before I started on the scoops...

Metaldoc 03-12-2016 05:07 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Quote:
Originally Posted by Possmguts (Post 7519709)
More pics of the good times... undoing work done the wrong way to redo it the right way... Probably should have done this part of the hood first before I started on the scoops...
That's a tough fix but it could be modified at this point. Just saying

Metaldoc 03-12-2016 05:17 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Quote:
Originally Posted by Possmguts (Post 7511751)
Welp.. the more I thought about it I started to wondered if the radiator was even gonna fit now... I doesn't... I need to find a radiator that's no more than 17" tall to the top of the cap... it can be several inches wider than this one too...

This is the radiator that was in the truck when I got it... I know it was just tossed in there and half ass mounted, so I'm gonna be looking to see if I can find a shorter one that might give me the room I need to use this hood.. Since the scoops are so close to the support but I still have some room over top of the support, I'm thinking about connecting the front hood frame to the scoops (But not changing the over all appearance you see from out side) and creating an opening in front of the support to pull air from the grill area... This might still work after all....
Have the filler tube taken off the top and put a 90 out from the tank. Then sink the rad into the rad saddle. I've done this on an s10 v8 convertion

Possmguts 03-13-2016 02:32 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Quote:
Originally Posted by Metaldoc (Post 7519877)
Have the filler tube taken off the top and put a 90 out from the tank. Then sink the rad into the rad saddle. I've done this on an s10 v8 convertion
yeah, we'll end up doing something like that, but to a better fitting radiator than this one.. it wasnt right to start with.

Possmguts 03-13-2016 02:34 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
3 Attachment(s)
More progress on the scoops... pretty close buts needs a little more work. Now that I shot a coat of primer on it I can see what needs done better.... and of coarse the holes still need cut. I'm having a hard time deciding what style I should go with...

Advanced Design 03-13-2016 03:19 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Looks really cool!

flashed 03-13-2016 05:32 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Looks great .I like it .

Possmguts 03-13-2016 07:09 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
2 Attachment(s)
Holes are cut... I'll clean them up and tack some screening behind all the way around the holes to help with strength.. but there is no flexing issue as I left some metal over and under the holes to start with.

jlsanborn 03-13-2016 07:56 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
You're making lemonade there man. My first thoughts were... then I saw the rot... now I'm seeing a pretty cool, custom hood. Well done!

swamp rat 03-13-2016 11:21 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
When you said help on adding radius's i thought you just meant radiusing the corners but the way you built that ridge around the opening looks pretty nice.

lower50's 03-14-2016 06:02 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
I really like how your scoops turned out :)

mooseknuckles 03-14-2016 07:26 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
nailed it!

Possmguts 03-14-2016 10:54 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Quote:
Originally Posted by swamp rat (Post 7521569)
When you said help on adding radius's i thought you just meant radiusing the corners but the way you built that ridge around the opening looks pretty nice.
Thanks.. what I ended up doing was using 3/8 round stock that i WAS going to weld on the underside and just radius the sides down, but got to thinking that would still be to dull and not finished looking... so on top it went and befor I kew it this is what was emerging.. I thinks its much more gooder :smoke:

Quote:
Originally Posted by lower50's (Post 7522439)
I really like how your scoops turned out :)
Thank you... wasnt as easy as I thought it was gonna be for sure.. 3 weekends I think so far and still not done. Plus I still have to patch up the leading edge of the hood to boot...

Quote:
Originally Posted by jlsanborn (Post 7521270)
You're making lemonade there man. My first thoughts were... then I saw the rot... now I'm seeing a pretty cool, custom hood. Well done!
:alky: well it wasn't lemoaid that put this insanity in my head lol Thanks

Quote:
Originally Posted by mooseknuckles (Post 7522526)
nailed it!
:smoke:

RRR18 03-16-2016 02:37 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Damn I was a page or so behind on this. Good for you havin the sack to do something that was in your head and make it come out as good as it is. Looks good.

Possmguts 03-20-2016 09:28 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Quote:
Originally Posted by RRR18 (Post 7524803)
Damn I was a page or so behind on this. Good for you havin the sack to do something that was in your head and make it come out as good as it is. Looks good.
Thank you sir... everything your body guy made look so easy takes me at least twice as long to do. I would be further along if I was home more than just 2 days a week too though... I just chip away at it until I have something worthy of a paint job. I haven't even touched the bed yet... its in pretty good shape but still needs a lot of work. Front and floor needs replaced (I think I'm gonna do something a little different with the floor) and the sides need some love to save.

I wish you would hurry up and bail yours out of paint jail, cant wait to see it!

Possmguts 03-25-2016 10:09 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Home again this weekend and the only new part waiting on me was a front shock lol... I screwed up on the last parts order and only ordered one so I had to put in an order for the other shock.

Gearing up for another big money order in the next week or two, but until then for the next couple weekends Ill be just be finishing up on the hood and maybe Ill stick the bed on so I can figure out where to mount the gas tank and where the fuel fill is gonna go and so on and so on...

Possmguts 03-26-2016 05:50 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
3 Attachment(s)
I think I figured out what I'm going to do with that awkward notch I was left with when I mounted the visor lower than its supposed to be. Gonna channel a couple lights into them... A couple pieces of 1 1/4" OD pipe and a couple 1" LED lights will work just fine..

aod92 03-28-2016 09:21 AM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Hood looks killer. Can't wait to see it finished!

Possmguts 03-30-2016 09:00 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
1 Attachment(s)
Didn't do much last weekend other than some sanding. I gotta get to the sheet metal shop to get a piece bent up for the front edge of the hood repairs, so i kicked her outside and did a "little" garage cleaning... meaning that i grabbed the blower and blew out a ton of dust :smoke:

swamp rat 03-30-2016 09:55 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
The blower is my favorite way to clean the garage LOL!

lower50's 03-30-2016 11:25 PM
Re: Blood Sweat and Tears.. 67 Build Thread
 
Yes best shop cleaning tool. Also the smell of 2 stroke.


All times are GMT -4. The time now is 04:28 AM.
Page 10 of 19 « First 56789 10 1112131415 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com