Re: Project "Hulk Jr"
Quote:
The sender is new from napa, But since the gauge works and then pegs out and then works again I am thinking the gauge... |
Re: Project "Hulk Jr"
Story continues of the cursed truck. The driver side muffler starts making a rattling sound. So guess what. Yes a baffle in the muffle came loose. Summit is sending another one.
Sigh!!! (Input Hillary joke here)!!!!hahaha. |
Re: Project "Hulk Jr"
I think this was suppose to be a reply and not a report to us, misclicks happen :)
lowrodderchev has reported a post. Reason: Quote: My truck is a 75 but it would do the same thing after I had put a new sending unit. |
Re: Project "Hulk Jr"
Quote:
|
Re: Project "Hulk Jr"
Lol. Ok maybe I will just try another sender!!!
|
Re: Project "Hulk Jr"
1 Attachment(s)
I think it's funny. My son washed his truck and took it out to take pictures. I am glad he is excited to drive it and take care of it.
|
Re: Project "Hulk Jr"
1 Attachment(s)
Another!
|
Re: Project "Hulk Jr"
1 Attachment(s)
1 more!
|
Re: Project "Hulk Jr"
Your going to love the fitech. I have one on my wheeler and its way beyond carbs, also just ordered one for my 70.
|
Re: Project "Hulk Jr"
Quote:
|
Re: Project "Hulk Jr"
Thanks Brett I am taking a break from the truck as my other son is getting ready for college and started coaching football again....
|
Re: Project "Hulk Jr"
Well time to get the FI installed this weekend. We will keep you guys updated!!!
|
Re: Project "Hulk Jr"
Awesome!
|
Re: Project "Hulk Jr"
1 Attachment(s)
Hey guys. Started the fi tech install Saturday. First thing I found was the clamp mounts for the FCC did not secure the FCC. I had to trim the area between the bolt to tighten up enough.
|
Re: Project "Hulk Jr"
1 Attachment(s)
I took off about 1/8". I guess I didn't take a picture after.
|
Re: Project "Hulk Jr"
1 Attachment(s)
I had to space out the FCC and all I had was 1-1/2" unistrut.
|
Re: Project "Hulk Jr"
1 Attachment(s)
The TB on the work bench about to go on.
|
Re: Project "Hulk Jr"
1 Attachment(s)
TB installed and it looks big on there. I do have to adjust the kick down cable. The throttle linkage is a little different then the Holley. So I will be making a new linkage. But it is working fine for now just a little crooked.
|
Re: Project "Hulk Jr"
1 Attachment(s)
Here is the FCC plumbed and wired.
|
Re: Project "Hulk Jr"
1 Attachment(s)
We had to install an air cleaner spacer because the low profile air cleaner hit the TB.
|
Re: Project "Hulk Jr"
1 Attachment(s)
Before picture with the Holley
|
Re: Project "Hulk Jr"
I did not have any issues with the clamps for my fuel pump I installed in my car. Fit real good. very cool set up.
|
Re: Project "Hulk Jr"
Hey David, how is it going? the system works pretty good.but needs some tuning. I will be calling FI Tech today because the idle is not right and the Fault code reads P0202 #2 injector and will not clear. I also have to readjust the kick down cable.
Quote:
|
Re: Project "Hulk Jr"
FI Tech 400hp with FCC startup
Here is a video I took before I adjusted the idle it was at 1200rpm after warm up. About 1800 cold. |
Re: Project "Hulk Jr"
1 Attachment(s)
Ok so here is the issue with the FCC mounting bracket. I already fixed it.
|
All times are GMT -4. The time now is 10:26 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com