Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
haha I just did the same thing, installed my bed before starting and the fuel pump had gone bad sitting. :dohh: had to pull the bed and reinstall it SOLO, broke the gas cap doing it. screwing up is actually called "experience", better than being a hair dryer (all hot air) in my opinion. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
I WAS feeling like a “hair dryer” before when Mike as doing all the mechanical work and Marcos all the body work. That was due to my mom being in hospice and not wanting to sell my truck as an unfinished project. It now i just feel so damn inept. Seems the more I try to plan things out and the more careful I am the dumber the mistakes I make. Wouldn’t be so bad if it wasn’t in finished paint already, but SHEESH!! |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
We’ll see what the future brings but if someone ever offers me stupid money for it I MIGHT consider building a little more “useable” version. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Oh the humanity ...
Nothing like DIY screw ups to make you humble . But then you can say I did it my way and learned what not to do. On the plus side you can proudly say I built that . |
Quote:
Posted via Mobile Device |
Re: Danny Boy is BAACK! w/ '55 Big Window
2 Attachment(s)
Friday, June 1, 2018
Ok, so I FINALLY finished assembling my bed today.... the 4th time. Sheesh, this was a p.i.t.a! I wish I could blame it on something other than my own stupidity but I can’t, damn!:waah: Anyway, she gets flat bedded to the paint shop tomorrow for final hood fitment, to repair chips on the window trim (ANOTHER stupid thing!) & install rear fenders. Glass shop is next door so the front & back windows will go in too. I bought polished stainless hood X bars and I’m debating billet SS hood hinges - expensive but cheaper than when I started on the truck. Anyway, that’s the current status. PS: These rims are 17x8’s and offset is wrong. I will replace them eventually but for now I’ve ordered spacers. i put washers on the studs to get it on the truck tomorrow. I used 7/16” washers so I assume that’s the stud size. Anyone know what replacement longer studs I should order? I know zip about Fords and this is a Ford 8.8 rearend. Any advice appreciated. |
Re: Danny Boy is BAACK! w/ '55 Big Window
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Lookin' good !
Dan that tire is going to rub, no doubt about it. You need at least 3/4". I'm glad you are having the body shop install the fenders, they are a pain to install without scratching the bed. Won't be long now that you'll be cruising' :) |
Re: Danny Boy is BAACK! w/ '55 Big Window
Getting real close.
Truck is going to be great when done. Kim |
Re: Danny Boy is BAACK! w/ '55 Big Window
Dan, bed looks great, won't be long now...Jim
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Thanks for the link Black Sheep. It says 1/2” stud but I easily put 7/16” washers on my studs last night so I THINK those are too large a diameter(?)
Thanks you guys for the comments. I ended up having to remove the bed side so I could take off the rear most cross sill yet again (miraculously I didn’t chip or scratch it!) and slid out one of the bed boards to tighten the fuel lines. Started truck hours apart to verify no leaks and the. Set about putting it all back together. Did it by myself. Dozens & dozens of trips up too and below in the creeper. Hate to admit it gave me quite a workout. Glen, That tire pic was before I installed the washers. There was barely 1/16” clearance so that was definitely not gonna work. Not sure I like the Smoothies after all. I’m considering replacing with gray spoke Torq Thrusts or 17” Rally repops (w/redline tires). |
Re: Danny Boy is BAACK! w/ '55 Big Window
For you that have done it, did you install welt between fender & bedside?
I wasn’t going to because they didn’t come that way. Then I realized Chevy/GMC didn’t because these weren’t passenger vehicles back then. They were tools like a hammer and the probably thought why spend an extra dollar per truck? |
Re: Danny Boy is BAACK! w/ '55 Big Window
Dan
I have made similar mistakes just as duffie , more as I age. Keep the faith, your list is getting smaller, all be it slower, but still less and less as time goes on. Strong work dude. I feel your pain.. Strong work NC |
Re: Danny Boy is BAACK! w/ '55 Big Window
1 Attachment(s)
Tuesday, June 5, 2018
Bad night, I actually fell out of bed last night (insert laughter here) cutting my chin, tearing inside of my mouth badly necessitating an ER visit this afternoon for stitches in my mouth. But first: I got up early - I was hurting anyway, couldn't sleep. Final tightened bed wood bolts, took truck off jack stands and did a full wipe down/dry off. Then.... FINALLY....loaded her for return to the paint shop. - Hood, grill, & custom over-radiator valance to be installed (bit a HARD bullet - ordered polished billet hinges today, ugh) - Windshield & rear glass to be installed. - Repair of too much STOOPID assorted paint damage I am responsible for. |
Re: Danny Boy is BAACK! w/ '55 Big Window
1 Attachment(s)
Well that means the truck is getting close to the finish line.
Sucks about falling out of bed hope you are ok. This should help. LOL Attachment 1790726 |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
But seriously, I moved the big dog bed we have in the room next to the bed last night...just in case!:lol: |
Re: Danny Boy is BAACK! w/ '55 Big Window
2 Attachment(s)
PS ‘Cause She’s WAAY More Important Than Any Truck
Introducing my newest and probably last grandchild, Indigo Grace James. Delivered by my adored daughter Sunday evening 14 minutes after they got to the hospital!! Eek! Name doesn’t roll off the tongue for my generation but fortunately she will be called “Indy” which goes well with her soon-to-be-4-years-old sister, Isla Pearle. (We have a neice that named her now 6 mo old son, “Zeppelin” so I feel relieved by comparison!) |
Re: Danny Boy is BAACK! w/ '55 Big Window
2 Attachment(s)
Oh, and a picture of sister Isla (because she’ll see the post). And one with mommy at the shower for her sister. Indy appears to be a twin of Isla at birth. Yeah, her hair was dark too and went blonde as it grew out.
Ok, enough grandpa stuff. Back to trucks!!! |
Re: Danny Boy is BAACK! w/ '55 Big Window
Dan, grandpa stuff is important. Enjoy them now, they will grow so fast...Jim
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Somehow my previous response got deleted or never posted.
Yes, I couldn’t agree more. It feels like my kids were this age just the other day but they’re about to turn 37 and 36 respectively! How can my infants be in business for themself or an attorney, lol?! Forgot to mention I bit a haard (though tasty!) bullet last night and ordered polished billet hood hinges for my truck - ugh. Good news is they’re half the price they were when I started this project. BAD news is they’re still expensive as hell. When it came right down to it, I just couldn’t see putting in black stamped steel hinges when I’ve gone for polished-everything-else. |
Re: Danny Boy is BAACK! w/ '55 Big Window
thanks for sharing pictures of your family! I know its not the name of either but rather of both, but Indigo Pearle would be a heck of a paint color. :lol:
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Danny
I told my children that the grand kids are my reward for not smothering my kids in their sleep. Grands kids are the best. Sorry my grand daughters are prettier than yours...... :haha::haha::haha: Dude you're getting closer and closer.... Strong work NC |
Re: Danny Boy is BAACK! w/ '55 Big Window
Congrats on the grand baby. You have a good looking family. The hinges may be expensive, but you will love them in the end.
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Congrats on the new grandchild.
Kim |
All times are GMT -4. The time now is 06:42 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com