Re: Chucks SWB Fleetside
1 Attachment(s)
Well I got the radiator today. I wasn't too pleased with the packaging but I think it will be alright. There was some styrofoam broken and the box was taped up even though there were staples in it. The staples weren't holding it shut at all so someone taped it. Kinda looks like its a returned item so they just shipped it out again. Some of the fins have been touched also. We'll see.
|
Re: Chucks SWB Fleetside
Yeah I'd call and asked for a discount but that's me...
Do you plan on painting it? I was planning on painting an aluminum radiator for my truck but I kinda like the way this one looks. |
Re: Chucks SWB Fleetside
5 Attachment(s)
side by side comp
|
Re: Chucks SWB Fleetside
5 Attachment(s)
I think when they (cold case) says direct replacement, they mean a 3 core radiator. My 4 core brackets are kinda big for their radiator. but I can live with it if it works. And I had a helper.
|
Re: Chucks SWB Fleetside
Quote:
|
Re: Chucks SWB Fleetside
3 Attachment(s)
So I got the new radiator in and filled with coolant. I ran the motor with the a/c on and it cooled well. I didn't road test it as it was raining and Choncho don't like no rain. It's more that I don't like to clean it after the rain.lol But I'll do that soon enough.
|
Re: Chucks SWB Fleetside
1 Attachment(s)
Oh did I mention I love my truck Well I do...lol
|
Re: Chucks SWB Fleetside
4 Attachment(s)
I have bought some 8'' wheels and tires and thought I would try and see if they felt different than the 20's. I think I need to have my driveshaft balanced as I have a lot of bouncing action going on. Same as with the 20's..
|
Re: Chucks SWB Fleetside
Hey Chuck, you haven't asked for opinions or help, but I figured I'd toss this out there in case you hadn't thought of it. Ignore this if you don't think it applies.
I don't know the symptoms, so I can't really tell what's going on, but if it feels like it could be the wheels and tires (the reason you went with a smaller wheel than the 20s), you might look at your shocks, ball joints, wheel bearings, control arm bushings, etc. Basically check out the soft and wear parts of your suspension. They can amplify any minor vibrations from small road imperfections, which make a low profile tire ride like garbage. Sometimes just adding grease to the greasable parts like ball joints will improve the ride a bit. Definitely check out your drive shaft if you feel like it needs some attention. |
Re: Chucks SWB Fleetside
Thanks Duane, I know I have flat spots on my 20's so I wanted to try some other wheels/tires to see how it felt. The front got better so I attribute the front shakes to the flat spotted tires. The rear got a little better but not a lot. I moves up and down and a little up to the right shake like something is out of balance. If that makes any sense. And I still think my driveshaft needs to be shortened about an inch. Its all the way in there almost.
|
Re: Chucks SWB Fleetside
3 Attachment(s)
Trying some safari van caps. I think I like them.
|
Re: Chucks SWB Fleetside
Looks fantastic man. How about some black enamel on that bright wheel weight?
|
Re: Chucks SWB Fleetside
Quote:
|
Re: Chucks SWB Fleetside
Quote:
|
Re: Chucks SWB Fleetside
Quote:
|
Re: Chucks SWB Fleetside
I got my new driveshaft in. The old one had tubes that were bent a little and I just had Dave do the whole thing new. The only parts that were savable were my yoke and carrier bearing. I had him go ahead and put new u joints in too although mine didn't have many miles on them. He uses Spicer brand. Mine were Taiwan I think. He also shortened the new one for me too. The vibration is a lot better now.
But as you know, whenever you get something fixed something else will pop up. Or off. While I was shutting my drivers door to go test drive it my sport mirror head popped out of the mirror arm and hit the ground and broke. Tiawan strikes again. Old truck, new problems.. I think I'll try to find a NOS one this time. |
Re: Chucks SWB Fleetside
I've got a NOS mirror replacement coming from Down South Truckin (Mike)
|
Re: Chucks SWB Fleetside
2 Attachment(s)
I got the NOS mirror on and the door panel all back together. I know you've never seen a mirror before so here ya go . lol
|
Re: Chucks SWB Fleetside
Awesome truck Chuck, you did a great job. I bought a 68 GMC LWB fleetside a couple weeks ago and it's mostly original and it's the same blue. I've scrolled through all 108 pages of your build - I'm just finishing up a 64 Chevy C10 with my dad so I remember all the stages and the struggles and wins with these projects.
I don't have the time or money to do a restomod, so I'll probably just repair the rust, give it a decent paint job, and make a few upgrades over time and drive it for awhile since it's only got 34,000 miles on it and runs great. Besides, I don't know if I can take not being able to drive it for years! P.S. - my uncle restores and customizes VW's (mostly pre-1967) here in Grand Junction. I've seen a lot of VW's come out of his shop with the same wheels you have on your bug. |
Re: Chucks SWB Fleetside
Nice wheels Chuck! How do you like the new radiator? Looks like a very nice piece.
|
Re: Chucks SWB Fleetside
Quote:
Sorry its been a while since I've been on here. Thanks! Yeah the wheels on my bug are Empi's. |
Re: Chucks SWB Fleetside
Quote:
|
Re: Chucks SWB Fleetside
Looking good as always. Here is a thread of mine http://67-72chevytrucks.com/vboard/s...d.php?t=301160 I have these trim rings I may run. I still can't decide on wheel color. They are currently white but thinking about black or the interior blue color which is a darker poly blue than the exterior baby blue.
|
Re: Chucks SWB Fleetside
Quote:
|
Re: Chucks SWB Fleetside
Here is another Chuck that loves your truck.
|
All times are GMT -4. The time now is 11:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com