The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OR 100's of misc parts from the last 6 trucks parted out (https://67-72chevytrucks.com/vboard/showthread.php?t=474388)

tll74 12-29-2011 05:37 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by Leroy-B1 (Post 5089741)
probably going to need a whole set-up as I only have the dash...the 68 would work best may need the radiator support if available of it also and battery box

Are we talking pump, brackets, condensor, hoses, firewall case, underdash, controls, nuts, bolts and etc. Basicly stem to stern & top to bottom...Everyting?

CC69Rat 12-29-2011 05:45 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
Looking for an above average GMC emblem for the front fender (68 Driver's side but I don't think it matters?L or R) and a LH (Drivers side) GMC grille surround trim piece. Do you still have anything from Pic 3 on the original post I see them there.

I'm looking for something not pitted real bad and / or would polish up for a fender I am painting just for practice. I'd like it to be better than driver quality but honestly the fender will hang on my garage wall. Not even going on a truck. Just decoration and the 'first fender I ever painted' wall art. Just an extra I had around.

Can you help me out ? :D

Leroy-B1 12-29-2011 10:56 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
mainly just firewall case, lines, and inside cab stuff basically everything except brackets, pump, and condensor

tll74 12-29-2011 11:21 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by CC69Rat (Post 5089772)
Looking for an above average GMC emblem for the front fender (68 Driver's side but I don't think it matters?L or R) and a LH (Drivers side) GMC grille surround trim piece. Do you still have anything from Pic 3 on the original post I see them there.

I'm looking for something not pitted real bad and / or would polish up for a fender I am painting just for practice. I'd like it to be better than driver quality but honestly the fender will hang on my garage wall. Not even going on a truck. Just decoration and the 'first fender I ever painted' wall art. Just an extra I had around.

Can you help me out ? :D

I believe I have all 6 listed and probably another 10 still on trucks so I'm sure I can come up with a nice one. thanks

tll74 12-29-2011 11:28 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by Leroy-B1 (Post 5090364)
mainly just firewall case, lines, and inside cab stuff basically everything except brackets, pump, and condensor

I have it all. I'll get back to you with a price soon. Thanks

72blazr 12-29-2011 11:58 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
Do you have any parchment seat belts in any of those trucks?

aventur1 12-30-2011 12:18 AM

Re: 100's of misc parts from the last 6 trucks parted out
 
ok, I'll join in to buy, how about 67-68 grill? I'm in Boise

tll74 12-30-2011 02:56 AM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by Leroy-B1 (Post 5090364)
mainly just firewall case, lines, and inside cab stuff basically everything except brackets, pump, and condensor

How about 400.00 plus shipping. Everything in the cab, complete firewall assy with sb hoses and the AC bracket off the battery tray (tray is rusted out). A complete set up less brackets, pump and condenser. My 68 has it all but the LH half of the firewall housing is broke where the vac reservoir mounts. The 72 looks identical. Pics no problem if interested. Thanks, Tom
Quote:

Originally Posted by 72blazr (Post 5090502)
Do you have any parchment seat belts in any of those trucks?

Good question, I'll check. it seems to me I saw some couple days ago.
Quote:

Originally Posted by aventur1 (Post 5090552)
ok, I'll join in to buy, how about 67-68 grill? I'm in Boise

No on the 67, yes on a 68 but you would have to change the upper piece as it is off a 69-70. Thanks

tll74 12-30-2011 03:05 AM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by Leroy-B1 (Post 5089741)
probably going to need a whole set-up as I only have the dash...the 68 would work best may need the radiator support if available of it also and battery box

No luck on the arm rest and no visor clips in the parchment color
Quote:

Originally Posted by chevyman70 (Post 5089698)
do you have any AC components? I need a diverter box, and the heater box that goes in the engine bay's firewall.

Sorry no partial setups for pieces at this time.
Quote:

Originally Posted by byates2 (Post 5089546)
would you happen to have the ignition parts for a 67, i need the spacer for the ignition switch

I have one on a truck 5.00 plus shipping.

Thanks to all, Tom

aventur1 12-30-2011 10:29 AM

Re: 100's of misc parts from the last 6 trucks parted out
 
Thanks for the info on grill, I guess I dont understand what you mean by upper part? Can u send some pics? My 68 has a full 71-72 front clip and I want to change it back to 68, I have the rad support, splash,and the hood. Slowley collecting parts, still need R/L fenders and passenger side wheel well and battery tray. Do I need a different hood latch when I switch over? Suppose I need the rad center support also. Thought I would ask all this while I'm looking. Afterwards going to sell all the 71-72 clip. Maybe if you have other big parts I need, I may just drive over to pickup.

tll74 12-30-2011 11:24 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by aventur1 (Post 5091113)
Thanks for the info on grill, I guess I dont understand what you mean by upper part? Can u send some pics? My 68 has a full 71-72 front clip and I want to change it back to 68, I have the rad support, splash,and the hood. Slowley collecting parts, still need R/L fenders and passenger side wheel well and battery tray. Do I need a different hood latch when I switch over? Suppose I need the rad center support also. Thought I would ask all this while I'm looking. Afterwards going to sell all the 71-72 clip. Maybe if you have other big parts I need, I may just drive over to pickup.

As I recall the 67 grill is 67 only because it has "GMC" imbossed in the center. The 68 is the same just doesn't have the "GMC" and is the same w/o the upper from 68-70. Both 67 and 68 have a upper portion riveted to the grill. This piece is painted body color and makes the seem to the 67-68 sloped hood. The 69-72 grill has a upper portion as well but it is chrome and much larger and accommodates the 69-72 hood. Buy switching the uppers you use any year grill on any truck. The hood latch is 67-68 only and yes the center grill support is as well. I do have the fenders, a 69 grill and no RH inners, 67-68 uppers or tray. I'll see what I can do for pics. It may be a couple days.
Thanks, Tom

dxevo 03-07-2012 03:30 AM

Re: 100's of misc parts from the last 6 trucks parted out
 
Do you still have a tail light harness availabel? I need the harness that goes from mid frame to the tail lights, lic plate light, rear side markers. please let me know how much with shipping to 92706 and some pics would be great. Thanks

tll74 03-07-2012 10:27 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by dxevo (Post 5235938)
Do you still have a tail light harness availabel? I need the harness that goes from mid frame to the tail lights, lic plate light, rear side markers. please let me know how much with shipping to 92706 and some pics would be great. Thanks

The only harness I have is the one from the cab to the harness your looking for. I need that harness as well. sorry

DnvrJay71 03-08-2012 05:09 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
I need one wiper arm. my driver side rivet that held on the blade broke off. Are they driver/passenger specific? if not, how much for two (might as well have a spare) shipped to 80134?

tll74 03-08-2012 10:41 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by DnvrJay71 (Post 5238987)
I need one wiper arm. my driver side rivet that held on the blade broke off. Are they driver/passenger specific? if not, how much for two (might as well have a spare) shipped to 80134?

They are the same R and L. 25.00 shipped on a nice pair.

DnvrJay71 03-09-2012 12:07 AM

Re: 100's of misc parts from the last 6 trucks parted out
 
PM sent

C5Phil 03-09-2012 08:04 AM

Re: 100's of misc parts from the last 6 trucks parted out
 
I'll take your two best GMC turn (parking) light housings with lenses. Let me know what shipping is to 14589 zip (upstate NY). thanks- Phil

tll74 03-11-2012 03:42 AM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by C5Phil (Post 5240403)
I'll take your two best GMC turn (parking) light housings with lenses. Let me know what shipping is to 14589 zip (upstate NY). thanks- Phil

I'll pick out the best two. Thanks
Pm sent

C5Phil 03-11-2012 09:13 AM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by tll74 (Post 5244458)
I'll pick out the best two. Thanks
Pm sent

money sent ;)

tll74 03-11-2012 01:39 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by C5Phil (Post 5244571)
money sent ;)

THANKS! I'll get them shipped out Monday, Tom

C5Phil 03-20-2012 08:12 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
Tom, you get a chance to ship out my parking light housings yet?

tll74 03-21-2012 02:05 AM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by C5Phil (Post 5264482)
Tom, you get a chance to ship out my parking light housings yet?

Phil, just sent you a PM a few minutes ago. I don't have you address. Thanks, Tom

67gmcstepside 03-21-2012 06:53 AM

Re: 100's of misc parts from the last 6 trucks parted out
 
E-brake cables with all supports LWB only 27.50 each - still available?

C5Phil 03-21-2012 09:13 AM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by tll74 (Post 5265319)
Phil, just sent you a PM a few minutes ago. I don't have you address. Thanks, Tom


PM'ed you my address-;)

tll74 03-21-2012 04:39 PM

Re: 100's of misc parts from the last 6 trucks parted out
 
Quote:

Originally Posted by 67gmcstepside (Post 5265418)
E-brake cables with all supports LWB only 27.50 each - still available?

Yes sir, it is.


All times are GMT -4. The time now is 02:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com