Re: So 1 more 72 blazer going under the knife
 

Pp received everything is good.

Re: So 1 more 72 blazer going under the knife
 

Great and thanks!!!!

Re: So 1 more 72 blazer going under the knife
 

Should ship today and I'll pm tracking.

Re: So 1 more 72 blazer going under the knife
 

Thanks Rip........just got the fuel filler neck. Did that one come out of a K5 Blazer too?

Re: So 1 more 72 blazer going under the knife
 

Yep, 72 k5 that's the only year that is 1 pc. all three others are 2 pc. That was quick!

Re: So 1 more 72 blazer going under the knife
 

I know...........I was like that can't be the part from you?

Re: So 1 more 72 blazer going under the knife
 

I'm going to try and use it on my 1970 C20 with a rear gas tank relocation that has been been done.

Thanks!!!

Re: So 1 more 72 blazer going under the knife
 

I had a 2 pc one also it may work better if it doesn't. I have the filler cut out for the bed side also.

Re: So 1 more 72 blazer going under the knife
 

OK........I will let you know once I get into it.

Re: So 1 more 72 blazer going under the knife
 

Are you going through the bed?

Re: So 1 more 72 blazer going under the knife
 

Can you send me some pictures of it? I am going to PM you my email so I know what I'm looking at.

Re: So 1 more 72 blazer going under the knife
 

Yes!!!

Re: So 1 more 72 blazer going under the knife
 

I will get some later today or tomorrow morning.

Re: So 1 more 72 blazer going under the knife
 

Great......thanks!!!!

Re: So 1 more 72 blazer going under the knife
 

I never received your email but here is the filler hole. Outside has some pitting but the inside is decent and probably more important than the outside. Top is rough but I don't think you really need that other than maybe placement.

Re: So 1 more 72 blazer going under the knife
 

How much are you asking for the cut-out? I see what your talking about. Will that neck I just got from you work with that cut-out?

Re: So 1 more 72 blazer going under the knife
 

Also, did that come out of a Blazer too?

Re: So 1 more 72 blazer going under the knife
 

40 shipped and that covers pp fees lol.

Re: So 1 more 72 blazer going under the knife
 

Yes, a 72 blazer.

Re: So 1 more 72 blazer going under the knife
 

You will need a rubber grommet for a 72 blazer may be the same as the trucks.

Re: So 1 more 72 blazer going under the knife
 

Let me check one thing with the neck I just got from you on the truck tomorrow. Once, I see what I need to know, I will get that piece or come up with something else.

Thanks,

Herb

Re: So 1 more 72 blazer going under the knife
 

Sounds good

Re: So 1 more 72 blazer going under the knife
 

Rip............I checked what I needed to confirm and it looks like I don't need that cut-out neck section. It appears that I need the other basic parts, hoses, clamps, gas cap and that metal piece that covers the neck for an auxiliary gas tank hook-up for a truck.

Re: So 1 more 72 blazer going under the knife
 

No problem, the cover is reproduced. I may have a used cap are you looking for nice or aged lol.

Re: So 1 more 72 blazer going under the knife
 

Since I have to order some parts for this gas tank setup, I will just get order some repro stuff. The truck is aged enough if you know what I mean. I can't figure out what to due with this thing. lol