Re: 1991 Crew Cab Short Bed Build
 

Sorry I'm pretty sure it's spoken for already. If things change I'll let ya know.
Thanks

Re: 1991 Crew Cab Short Bed Build
 

Tying up all the little things. Used big block upper radiator support. I think it looks clean and hides the aluminum radiator. I'm kinda going for the blacked out look under the hood. Yes I know the intake needs paint then probably. What do you think?...black it out too? Waiting on Tac Module and we should be able to turn a key and see what happens.

http://67-72chevytrucks.com/vboard/p...ictureid=23560

http://67-72chevytrucks.com/vboard/p...ictureid=23561

Re: 1991 Crew Cab Short Bed Build
 

All I can say is WOW!!! Sat here on went through the entire build thread. That is one beautiful truck!!

Re: 1991 Crew Cab Short Bed Build
 

Thank ya very much...I appreciate it

Re: 1991 Crew Cab Short Bed Build
 

Those filler panels are pretty cool!

Re: 1991 Crew Cab Short Bed Build
 

Thanks, if I had a decent camera phone I'd snap a good picture. :lol: It really does clean up the engine compartment.

Re: 1991 Crew Cab Short Bed Build
 

That looks very nice! I'd almost leave the red on the letters. Anyone should know it isn't a TBI engine any how and you spent that extra coin on a little more power so show it off IMO. :lol: Plus if you ever sell the truck you can verify it truly has a "Corvette" engine. Haha

Re: 1991 Crew Cab Short Bed Build
 

Thank you sir. I think it'll look good all cleaned up.

It looks better with the covers on. I think they will stay for now. I've spent ALL my budget anyway! :lol:

Re: 1991 Crew Cab Short Bed Build
 

ls1 or ls6?

Re: 1991 Crew Cab Short Bed Build
 

Ok...update.

Motor in all was good put 400 miles on it.

http://67-72chevytrucks.com/vboard/p...ictureid=23694

then this happened:

Drive shaft seems to spit out a u-joint cap. Seems the driveline vibration busted the transfer case.

http://67-72chevytrucks.com/vboard/p...ictureid=23703

http://67-72chevytrucks.com/vboard/p...ictureid=23704

So now I'm in the market for a new transfer case, or some new parts for my transfer case.

Re: 1991 Crew Cab Short Bed Build
 

Sorry to hear that. What tcase do you have in it currently?

Re: 1991 Crew Cab Short Bed Build
 

How do you have the t-case braced?

Re: 1991 Crew Cab Short Bed Build
 

thanks, its a bummer of a set back thats for sure. But could've been way worse. I was doing 75 when it happened.

It had a 90-91 suburban NP241, thats what I'd like to find again for it just because the whole VSS problem is easy that way.


The factory brace, but I am going to fab up something better this go around. I'm thinking of using the same thing the later 90's used in the 2500 & 3500. They supported the slip yoke with a carrier bearing looking cross brace.

But I'm def open to ideas and suggestions. :lol:

Re: 1991 Crew Cab Short Bed Build
 

If you can't find one in your area, I know a guy about 45 minutes from me that probably has a few.

Re: 1991 Crew Cab Short Bed Build
 

Thanks Dieselwrencher....I think I have one coming from Tennessee.

Re: 1991 Crew Cab Short Bed Build
 

I will bring you my Dmax next week if you want to trade

Re: 1991 Crew Cab Short Bed Build
 

I'm not ready to throw in the towel yet. But thanks for tracking down a transfer case for me. It should be here Friday. I owe ya one brutha :metal:

Re: 1991 Crew Cab Short Bed Build
 

What wheels are you running??

Re: 1991 Crew Cab Short Bed Build
 

I've completely forgotten. I'm sure its in this thread somewhere. I'll post it up if I remember.

Gettin old sucks :lol:

Re: 1991 Crew Cab Short Bed Build
 

Found it. :)

Re: 1991 Crew Cab Short Bed Build
 

Thanks! :metal:

Re: 1991 Crew Cab Short Bed Build
 

Got everything back together. Decided that the thing needs driven, so we decided to take a road trip to Montana.

Flagstaff
http://67-72chevytrucks.com/vboard/p...ictureid=24027

Navajo Nation
http://67-72chevytrucks.com/vboard/p...ictureid=24032

Lake Powell
http://67-72chevytrucks.com/vboard/p...ictureid=24035

Utah
http://67-72chevytrucks.com/vboard/p...ictureid=24033

Bryce Canyon
http://67-72chevytrucks.com/vboard/p...ictureid=24031

Re: 1991 Crew Cab Short Bed Build
 

Then in Salt Lake City this happened:

http://67-72chevytrucks.com/vboard/p...ictureid=24034

Turned out it was a bad speed sensor. This ended the trip for the pickup though. Wish I would've looked into it a little more but I had the family and didn't want to waste our vacation in a hotel room in Salt Lake. So we rented a car and kept heading north! Bummer I didn't accomplish what I wanted to do but sometimes that's life I guess!

Re: 1991 Crew Cab Short Bed Build
 

Ah bummer. I'm not seeing pics for some reason, but get the gist of the story. New rigs break too is what I always tell myself.

Re: 1991 Crew Cab Short Bed Build
 

Marcus,
You can't see the most recent pics? Hmmm those are posted on the forum. I heard photobucket is not allowing hosting (unless you upgrade your account).

I wonder if that's what it is???