Re: Reconditioned gauge Clusters F/S
Hi Tom..I have a cluster from a 71 Blazer I need restored. I'll send you a PM as well.Thx
|
Re: Reconditioned gauge Clusters F/S
This is great news, welcome back.
|
Re: Reconditioned gauge Clusters F/S
Welcome back to our family, Tom!!! You may have to expand your shop space!
B/R, Randy |
Re: Reconditioned gauge Clusters F/S
We have a original cluster with a tach needs some work and we don't know if it works or not. How much to check it all out make sure it works and what resister does it need to be installed with heI distributor? The truck we are putting it in didn't have a tach previously. So what do we need to do with the plug? If anything. Will take some pictures of it soon. Please let me know ball park pricing, etc. Thanks. Also don't know how this forum works with messages and such am new to board although been a member for some time. Am learning. Thanks again.
|
Re: Reconditioned gauge Clusters F/S
Quote:
Thank you for the interest, Tom |
Re: Reconditioned gauge Clusters F/S
Can you add a Tach to a cluster that dont have one ?
|
Re: Reconditioned gauge Clusters F/S
Quote:
You need both tins, new lens and new circuit board as well as the tach I also have the ability to test OE tachs. Let me know what you are looking to accomplish and I should be able to help you out. Thank you, Tom |
Re: Reconditioned gauge Clusters F/S
Will do ,thinking about adding a tach cluster to a 72 4x4 I just bought .
|
Re: Reconditioned gauge Clusters F/S
Is an OE tach repairable if you test and it's no good or just best to go with one of our after market tachs?
|
Re: Reconditioned gauge Clusters F/S
Quote:
I am not sure if it would be worth the effort to put modern day tach guts in an original tin? It would be the best of both worlds and LS compatible would be a bigger bonus ;) As for aftermarket tachs, I use Counterpart brand. I have sold many in my restorations and have had no issues that I am aware of. Hope this helps. Let me know if you need more info. Tom |
Re: Reconditioned gauge Clusters F/S
HI Tom,
I'm still in need of an OEM tach/vac lens and a good clean tach face. Let me know if you have any for sale. |
Re: Reconditioned gauge Clusters F/S
Quote:
Hope something comes up for you soon. Take care, Tom |
Re: Reconditioned gauge Clusters F/S
Thanks Tom
|
Re: Reconditioned gauge Clusters F/S
5 Attachment(s)
Currently working on a restoration for a board member. It will get my usual treatment.
In case anyone is interested, I do more than Chevy truck clusters. Contact me if you are interested. Also working on a cluster for a 1954 Pontiac that is getting a 12 volt conversion and a volt gauge instead of the stock amp gauge. Thank you for looking, Tom |
Re: Reconditioned gauge Clusters F/S
Tom- Are you still doing the 80's quartz clocks?
|
Re: Reconditioned gauge Clusters F/S
Quote:
Let me know what you need. I have a few of the clocks here but not sure if they are complete. You can send me a PM or email to : tbonegarris@yahoo.com If you send email, add your screen name in the subject box so I know it is you. Thank you, Tom |
Re: Reconditioned gauge Clusters F/S
Tom email sent in regards to a tach
|
Re: Reconditioned gauge Clusters F/S
Quote:
Thank you, Tom |
Re: Reconditioned gauge Clusters F/S
TTT,
Let me know if anyone needs restoration work done or repair. Remember that I am set up to repair and calibrate speedometers. I can also set your odometer to mileage of choice. I can do a volt gauge conversion as well as add a clock in the small un-used space on the cluster. Thank you, Tom |
Re: Reconditioned gauge Clusters F/S
Quote:
|
Re: Reconditioned gauge Clusters F/S
Quote:
Take care, Tom |
Re: Reconditioned gauge Clusters F/S
Quote:
|
Re: Reconditioned gauge Clusters F/S
Quote:
Take care, Tom |
Re: Reconditioned gauge Clusters F/S
Just returned from the Portland swap meet. I bought a couple of cores there. If any one is interested in building a tach or non tach cluster with or without a volt gauge conversion, let me know and I can provide details.
Take care, Tom |
Re: Reconditioned gauge Clusters F/S
Hi Tom, is it possible to get a reconditioned full gauge set up with tach and maybe also with a clock (not really sure about clock) for a 1967 truck. I would like the silver paint set up like the original , not chrome. I know this is not topic to what you do but, I would like my glove box to match the recondition dash is that's something you might do of course for a additional fee.
NGN Thanks Nick |
All times are GMT -4. The time now is 11:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com