|
Re: The '67 Burb Build Thread
wow...125 a pair, much better lol
|
Re: The '67 Burb Build Thread
haha yup lol. not a bad price at all, i have had mine since 06 and they are still nice and not all dried out or anything, so i would call it pretty good quality stuff. i also bought their tailgate/lift hatch seals and the seal for the hatch glass at the same time
|
Re: The '67 Burb Build Thread
sorry to barge in hear but does anyone know where to get the right rear quarter glass? I need to get one soon.....Thanks
|
Re: The '67 Burb Build Thread
you can check on ebay, i think they have some for sale on their.
|
Re: The '67 Burb Build Thread
4 Attachment(s)
did some cutting of uneeded under dash wireing and some wire wheeling, then i sprayed some rust converter around where the windshield rubber goes, behind the dash/inside fire wall, and above the inside of windshield, and started wire wheeling the paint and bondo off of my replacement fender so i can fix/redo it.
Attachment 687313 Attachment 687314 Attachment 687315 Attachment 687316 |
Re: The '67 Burb Build Thread
dayum youve been busy! i miss those day when i neede to take somthing big off i still need to do that just not where i live garage is to small...looks AWSOME!!!
|
Re: The '67 Burb Build Thread
haha thanks, and yah ive been busy lol.
|
Re: The '67 Burb Build Thread
1 Attachment(s)
finished wire wheeling the paint off of the front side of the fender.
Attachment 688032 |
Re: The '67 Burb Build Thread
3 Attachment(s)
pulled both front fenders, realigned driver dorr as best as possible, and rehung and aligned drivers fender. also installed my other block off plate i made.
Attachment 688684 Attachment 688685 Attachment 688686 |
Re: The '67 Burb Build Thread
looks good i will be doing somthing similar to you when i do a conversion to AC
|
Re: The '67 Burb Build Thread
5 Attachment(s)
wire wheeled and painted one coat of paint on one side but ran out of paint, and took a pic of what i did last night. realigned the door and installed the fender, the door gap is real close at the bottom, but nothing touches. also decided to take a ic of the original spid
Attachment 689023 Attachment 689024 Attachment 689025 Attachment 689027 Attachment 689026 |
Re: The '67 Burb Build Thread
i wish i had the new pass. fender! what is wrong with the old fender?
|
Re: The '67 Burb Build Thread
they are both 68 fenders, but the new one is in way better shape and the marker weld job is done way better lol. the one i took off is warped aorund where the marker light was welded in due to using a cheap flux core welder and kept blowing through the cheap aftermarket metal being welded in. also it is messed up in the rear lowe corner due to a jack stand lol. dont ask how that one happened haha
|
Re: The '67 Burb Build Thread
5 Attachment(s)
drilled out the rivets and removed these from my grille as i have decided that i am no longer going to use them, cut the center grill support to make it look cleaner behind the grille since i will not be using the grill insert things. also drilled a 1/2" hole and cut a notch in the side of the dash to slide around the wiring that comes out through the bottom of the drivers side a pillar, then i cut out the backside of the replacement front fender for tire clearance
Attachment 689522 Attachment 689523 Attachment 689524 Attachment 689525 Attachment 689526 |
Re: The '67 Burb Build Thread
5 Attachment(s)
painted around the windshiel area inside and out, finished painting the splash pan, painted the radiator core support, radiator, frame rails, also painted the drivers side fender. i also installed the grille trim and started installing the grille. also purchased some headlight and wiper switch knobs and bezels from sharpie
Attachment 690017 Attachment 690018 Attachment 690019 Attachment 690020 Attachment 690021 |
Re: The '67 Burb Build Thread
4 Attachment(s)
oh, and i sprayed some rust reformer paint on the inside of the replacment passanger fender
Attachment 690022 Attachment 690023 Attachment 690024 Attachment 690025 |
Re: The '67 Burb Build Thread
wow it looks clean....
|
Re: The '67 Burb Build Thread
haha thanks, i like the way it looks without the grille inserts and turn signals in front. still need to finish the other fender so i can put it on and finish bolting the grille down and bolt up the splash pan.
|
Re: The '67 Burb Build Thread
are you gonna run the turn signals in the bmper 71 72 style?
|
Re: The '67 Burb Build Thread
ewwe heck no lol. might not run any, not sure yet. but if i do they will not be the stock ones. also i plan on running some wire mesh behind the grille openings. will then have to make an extension rod to open the hood. but if i do that i might hide the turn signals behind the wire mesh.
|
Re: The '67 Burb Build Thread
what did u use for paint on all that?
Posted via Mobile Device |
Re: The '67 Burb Build Thread
everything is all done in rattle can. which part and color are you refuring to so i can tell you what brand and kind of paint?
|
Re: The '67 Burb Build Thread
5 Attachment(s)
installed the door hinge that i got from sharpie, notched my dash mount, welded some studs to the bottom of the dash, and installed and painted the dash (will do body work on the center later), also aquired some new mirrors for my burb
Attachment 690633 Attachment 690634 Attachment 690636 Attachment 690635 Attachment 690632 |
Re: The '67 Burb Build Thread
4 Attachment(s)
here is some other pics of me test fitting the dash and stuff and the studs that i welded on.
Attachment 690639 Attachment 690637 Attachment 690638 Attachment 690640 |
Re: The '67 Burb Build Thread
wow this is a cool idea about how to put the dah in with out welding it in
|
| All times are GMT -4. The time now is 02:22 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com