Re: 1948 Chevy / S10
 

shannon,

yeah I love them taillights. Seen em before on these trucks, def very sleek. Great mod, great metal work. How do they mount? They have some threads on the back or anything? Easy to get to??

Re: 1948 Chevy / S10
 

Chevette, Daze57, mknittle, oldman3, Thank you. Yes, it works well because hole sawing is always a pain. I always like little tricks to make things easier.

99 to Life, Thank you. I will take a picture of the buckets I made. As for the light I will tack a screw in it and the will be a lock nut on the inside of the fender. So it can be removed for changing the bulbs.

Shannon

Re: 1948 Chevy / S10
 

99 to Life, here are the light buckets. It starts with 3.5 tubing and then gets a cap welded to the end. The outside holes are the mounting holes and the center hole is where the bulb wires come out. I tack it in the hole and square everything up and mark it with a sharpie marker then break the tack and use my trusty slitter wheel on the 4.5 inch grinder to cut it to the profile of the fender.

Shannon

Re: 1948 Chevy / S10
 

I finished up the tail lights this weekend. So now I have a bunch of little things I am working on now. I finished the edges on the splash aprons and the radius on the running boards. So they are finished now also. Next is the inside filler piece on the roll pan to the raised bed floor. So keeping with the paneled theme I will panel it too. But that will be this week. I only did a small sample so I could see if my bend and step was right.

Shannon

Re: 1948 Chevy / S10
 

more

Shannon

Re: 1948 Chevy / S10
 

b!tchin' work!!

Re: 1948 Chevy / S10
 

The running boards look super.

Re: 1948 Chevy / S10
 

That pickup is looking so good, nice work...Jim

Re: 1948 Chevy / S10
 

a@@ end is looking sexy

Re: 1948 Chevy / S10
 

seanery, mknittle, oldman3, 99 to Life, Thank you all. Glad you all like it. I should have more pictures this weekend. I should be starting the inner wheel wells and a forward tilting hood.

Shannon

Re: 1948 Chevy / S10
 

shannon

you are gettin that truck very dialed in - excellent skills and workmanship.
we have a bunch of very talented guys on this forum and i know we learn from others .

Re: 1948 Chevy / S10
 

Daze57, Thank you. I know I have learned a lot on here and I always willing to share how I do things. That is the great thing about this forum. Great forum and great people on it.

Shannon

Re: 1948 Chevy / S10
 

the golden hammer has struck again,very good work.

Re: 1948 Chevy / S10
 

Larry Lindley, Thank you. I do like my special golden hammer. Haha

I had off today so I worked in the garage for 5 hrs. I now have the drivers running board and splash apron all finished up and the filler piece for the roll pan. I used it to fill in because of the raised bed floor. So it is done also. I am moving front now . So next will be a few spots around the wind shield and then onto the inner wheel wells. I also have a picture of the pickup and the panel together. I am going to a car show tonight.

Shannon

Re: 1948 Chevy / S10
 

a few more.

Shannon

Re: 1948 Chevy / S10
 

your work is absolutely sick !!!!!!!!!!! in a good way !

Re: 1948 Chevy / S10
 

Beautiful work as usual, those two rides together look outstanding, enjoy the show....Jim

Re: 1948 Chevy / S10
 

Lookin good! man I gotta get my bead roller powered.

Re: 1948 Chevy / S10
 

I know you mentioned blind spots while driving the panel, daaaaaannnggg I feel you. How about some trucker mirrors. I actually like them and they would help you out. Wish I had a power bead roller too. Great work

Re: 1948 Chevy / S10
 

Daze57, Thank you

oldman3, Thank you, I thought it looked neat face to face.

mknittle, Thank you. The bad thing is I think I need to build a 36" deep bead roller. So I think I am going to have to do a rebuild. Powering was a great addition though.

99 to Life, Thank you. Yes it is the moving blind spot. I do have other mirrors but have not had the time to put them on. They are really nice, they have LED turn signals in the front of them. I do not like the way they mount so I will do it another way.

I started on the inner wheel wells today. I first started with some 2" strips and bent them so I could make a buck for them when rolling them and checking for the clearances. I used my stretcher/shrinker to make my radiuses. Then tacked them together when I was happy. Then used poster board for my sheet metal lay out. I cut it all out then did my bead rolling. I had the swap my dies top to bottom because I could not get the part through the throat of the bead roller. I need to make a bigger one! Then rolled it on the slip roller. It fits great. I need to finish the front and the back where it bolts the the rear upper part of the fender because it angles back. I use the stretcher to get it to fit the fender. I am going to make the panel a set hopefully soon also.

Shannon

Re: 1948 Chevy / S10
 

more

Shannon

Re: 1948 Chevy / S10
 

Those look fantastic.

Re: 1948 Chevy / S10
 

Oooh, I love the inner fenders!

Once again, great work and thanks for sharing!

Re: 1948 Chevy / S10
 

Shannon, inner fenders look great, nice work....Jim

Re: 1948 Chevy / S10
 

Great work again,thanks for sharing.now make room for mine.