Re: How about some pics of Static dropped 60-66
|
Re: How about some pics of Static dropped 60-66
Quote:
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Thanks for the compliments. Nitto 555's, 245/40 18 front and 285/30 20 rear. Forgot to add cpp c-notch welded in rather than bolted.
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Nice!!! 65shortbox Lets see more pics! like interior and under hood
|
Re: How about some pics of Static dropped 60-66
Quick question on the static dropped trucks. How many of you are notching the frame in the rear? I'm dropping a '64 long box, looking at "5 drop coils, or a combination of blocks & coils totaling "5 in the rear and wondering how necessary a set of bolt-in c-notches would be? Any opinions? Maybe pics of how close the rear axle is to the frame in your static drop setup?? Any info is much appreciated!!!!
|
Re: How about some pics of Static dropped 60-66
I am not sure of the "magic number" where you would add c-notch but I have had three of these trucks, two lowered, and the short bed was the lowest. I added the c-notch because it felt like I would lose control when on the freeway and hit a bump on the road. At first I could not figure it out because bumpstops are rubber and soft. Thought maybe it was the front end/bumpsteer. I noticed when I would add a decent load out back the axle was resting on the bumpstops. After I installed the c-notch it made a world of difference in ride quality and highway speed stability. I HIGHLY recommend it when lowering these trucks any significant amount like you propose. Maybe check distance between bumpstops and axle after you drop the truck to be sure. Just my .02...
|
Re: How about some pics of Static dropped 60-66
Hey Polaris,
The "rule of thumb" is anything over 4 inches should be notched. I'll post up a couple of pictures soon, but I just completed a 4 inch coil drop and my spacing is fine. However, if I were to go any lower, I'd definitely notch the frame. |
Re: How about some pics of Static dropped 60-66
Thanks for the replies, that pretty much answered my question. Since I'm gonna have the box off it over the winter, I'm thinkin it'd be a smart time to go ahead with the notches. Thanks again!!!
|
Re: How about some pics of Static dropped 60-66
This is at 5-1/2" in the front and 6-1/2" in the rear as measured from the floor to underside of main frame rails directly below front and rear cab mounts.
http://i224.photobucket.com/albums/d...rgin/004-7.jpg |
Re: How about some pics of Static dropped 60-66
that is so bad ass lookin. love it
|
Re: How about some pics of Static dropped 60-66
Its bad a$$ alright!!! I love it too!!!
|
Re: How about some pics of Static dropped 60-66
DURG? What size tires are you running?
|
Re: How about some pics of Static dropped 60-66
Quote:
|
Re: How about some pics of Static dropped 60-66
3 Attachment(s)
CPP 4/5 kit.
|
Re: How about some pics of Static dropped 60-66
Quote:
|
Re: How about some pics of Static dropped 60-66
Quote:
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
|
Re: How about some pics of Static dropped 60-66
Durg, lookin awesome, would love to see it all together!!
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
I have gone through this thread and see a lot of cool trucks.
There is a lot of hard work showing in those photos. Nice job guys. What I am wondering is where are the photos of the suspensions? I am specifically looking to find information on coil over front and rear static suspensions. I was going to do air springs but can't find a system that has a single set ride height as I do not want to have a variable system. So I was thinking a static coil over system would be best for what I am doing. Does anyone know if there is anything available on static coil over suspensions and if so where? :5150: |
Re: How about some pics of Static dropped 60-66
Durg's is static drop ridetech coil over. Check his thread, GREAT work on his truck.
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
So where is his build thread?
|
Re: How about some pics of Static dropped 60-66
I found this thread.. cool static rear suspension
http://67-72chevytrucks.com/vboard/s...d.php?t=550139 :5150: |
Re: How about some pics of Static dropped 60-66
Quote:
|
Re: How about some pics of Static dropped 60-66
I'm gonna try.[IMG]pc130043[/IMG]
|
Re: How about some pics of Static dropped 60-66
Nope, guess I'll have to try something else!
|
All times are GMT -4. The time now is 08:53 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com