Re: The 60-66 "PAYING IT FORWARD" thread!
5 Attachment(s)
Radiator from 1962 C-10 235 6-Cyl Manual Transmission
My local radiator shop wanted $675 to re-core it due to the many leaks and previous repairs done so I ordered a new one. I hate to throw it away if someone has a use for it. Located in Auburn, IN You pay shipping 26.5lbs, Box is oversize for UPS 9"x31"x34" |
Re: The 60-66 "PAYING IT FORWARD" thread!
4 Attachment(s)
Pan hard bar has been shipped out.
Still have the bumper if anybody wants it. I'll probably take it to scrap metal in a week or two if it's still in my garage. Additionally there's the old step bumper from my truck. Mine is a 66, so should fit on whatever has the same width frame rails. I've towed 4,500lbs with the hitch on it no problem, no idea what you can safely tow with it though. You'll need new bolts and this guy would be a pick up only item. Also in Eugene. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Thanks, Jesse |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
- you don't happen to be planning any trips to Bend, or eastern Oregon in the very near future do you? I'm heading up that way very soon. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Quote:
Eugene is a pretty day trip from Bend though! |
Re: The 60-66 "PAYING IT FORWARD" thread!
[QUOTE=Cooper197;8003899]Jesse I responded to your PM.
Got the Panhard bar,very cool. Thanks, Jesse |
Re: The 60-66 "PAYING IT FORWARD" thread!
[quote=sofilofi;8012238]
Quote:
|
COLORADO - 1965 Spindles, drums, brake lines, master cylinder
Original front end parts from my 65 C10
All were in good working condition. Front brake lines came off well too. Free for the taking. |
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
Anyone want the original Eaton rear from my '60? NW Missouri
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I'd like the panhard bracket off of it...
Whattaya say...? I'd gladly pay for the ride.. ;-) |
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
Quote:
I don't think yours is posi after comparing it to my carrier and the non-posi unit I have from a 62. If I'm seeing something wrong of course let me know. Thanks |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
2 Attachment(s)
Fender Welt or Welting for fenders, one roll unopened. You pay shipping from 76633.
|
I would be interested 43015
Rick Posted via Mobile Device |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Quote:
Fedex Ground 3 day - $13.80 |
Re: The 60-66 "PAYING IT FORWARD" thread!
I have a 6 cylinder engine one hour north east of Seattle, WA. Pulling it out of a 64 Chevy very soon. Looks like a 250 but not sure since out is not original. Didn't run when i got the truck and I have put no effort into getting it running. Free if you want to help pull it. I don't want to store it. PM me for more info.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
How much to get the door panels to 33510?
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
MasterChief I will take them if you still have them. Sorry for the delay never seen your response til now. I will send PayPal if that works and you still have the roll.
Rick USMC |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Payment sent
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
If you still have it then, I'd love to have it. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Have in cab gas tank,with sender,and mounting plates with straps from 63 c-10,no rust and came out in one piece,not sure of sending unit shape,had old fuel in it and haven't pulled the sender out to check,am going with rear sub tank..
|
Re: The 60-66 "PAYING IT FORWARD" thread!
3 Attachment(s)
I have aset of four 15" three-clip 6 lug wheels off 66 Chevy C10 located Santa Fe NM. Also brake drums and parts that are as old as truck. I suspect that shipping is prohibitive.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
Under seat jack mount, spare mount parts.
BTW, who collecting bolts? I came across a can full I pulled. |
Re: The 60-66 "PAYING IT FORWARD" thread!
2 Attachment(s)
2 Exhaust brackets off a 64' C30. Shipped from 89508.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
passing on under seat jack mount
|
Quote:
Posted via Mobile Device |
Re: The 60-66 "PAYING IT FORWARD" thread!
Hi Tom,sorry i don't have the tank any more,forgot to update the post...Darren
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
No problem thanks for the reply back
|
Re: The 60-66 "PAYING IT FORWARD" thread!
2 Attachment(s)
Embarrassed to post what I have after seeing all the great stuff everyone else is offering, but there are some scraps from repairing my 66 that I was going to haul off but if anyone who is making some minor patches could use any of this stuff let me know. Just pay shipping from my zip 30263. The top pic is the repro patch panel scraps and below is the sandblasted original scraps.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
5 Attachment(s)
Have a floor mat out of my 64 C30, good condition, two rips by e-brake handle, spare tire holder, radiator, was not leaking, installed aluminum radiator and sill plates, not dinged up or rusted. Shipped from zip 89508.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
2 Attachment(s)
Here's sill plates. shipped from zip 89508.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
3 Attachment(s)
Also have a west coast mirror bracket, right side, I took off 64 C30, didn't match left side. Shipped from zip 89508.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I will take the under bed tire carrier Shipped to 37091
|
All times are GMT -4. The time now is 12:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com