The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=205)
-   -   Danny Boy is BAACK! w/ '55 Big Window (https://67-72chevytrucks.com/vboard/showthread.php?t=463698)

Dan in Pasadena 09-22-2019 12:28 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
Quote:

Originally Posted by BIGglaSS (Post 8596991)
Stance looks perfect from here! :metal:

It doesn't look too level? No rake at all?

In certain situations it almost looks like I was going for a tail dragger look - something I REALLY don't want in my dream truck.

Kim57 09-22-2019 09:14 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
Truck looks great.
I agree just a bit higher inthe rear though.
Kim

G&R's57GMC 09-22-2019 11:49 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
It looks good ... but it does looks like the springs have settled since the early picture.
It couldn’t hurt to raise it a bit to bring it back to where it was when new.

How’s the puppy?

Dan in Pasadena 09-22-2019 12:43 PM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
1 Attachment(s)
Thanks Kim!

Hi Glen. Joey’s doing fine. He’s dead asleep next to me as I post this, the little pooper!

oldman3 11-29-2019 08:54 PM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
OK, since Dan hasn't said anything I will. Dan is in the running for Truck of the Month. He's currently in 2nd place. If you haven't voted go to this thread and vote for Number 5. Dan deserves this win...Jim

http://67-72chevytrucks.com/vboard/s...55#post8631955

Dan in Pasadena 11-29-2019 09:16 PM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
Very nice of you, Jim.

But Jim is in this race too. Vote for him! His truck is to die for beautiful and he did all the work himself. Anyway, thank you again for the thoughtfulness. I hope you and yours had a safe and happy thanksgiving. Best, Dan

oldman3 11-30-2019 12:13 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
Quote:

Originally Posted by Dan in Pasadena (Post 8634913)
Very nice of you, Jim.

But Jim is in this race too. Vote for him! His truck is to die for beautiful and he did all the work himself. Anyway, thank you again for the thoughtfulness. I hope you and yours had a safe and happy thanksgiving. Best, Dan

Thank you Dan, hope your family had a great thanksgiving...Jim

Roadkill58 12-31-2019 01:02 PM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
Congrats on TOTM.



.

Dan in Pasadena 04-17-2020 12:27 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
Quote:

Originally Posted by Roadkill58 (Post 8651881)
Congrats on TOTM.

Ha! Thanks. I hadn't been back to this thread in a long while.

Just a short update that life got in the way and I basically haven't driven my truck at all since it came home from the shop. Probably not 50 miles total!! Short version is we moved after 20 years in the Pasadena house. I am now Dan in Glendora but can't change my name here.

The truck was in a detached garage at the end of a 100 ft. long single file driveway behind a gate and an RV that had to be moved every time I wanted to drive it. It'll get driven a lot more now! Pics eventually when I get the truck here and the garage cleaned up. For those not from SoCal we are only about 14 miles east of where we were but a larger newer house. Best, Dan

oldman3 04-17-2020 09:02 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
Dan, congrats on the new home, enjoy...Jim

Dan in Pasadena 04-21-2020 01:46 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
2 Attachment(s)
Quote:

Originally Posted by oldman3 (Post 8718284)
Dan, congrats on the new home, enjoy...Jim

Thanks Jim! Sorry for the delay in responding, things have been a bit crazy with moving, etc amid the pandemic lock down.

She is spending her first night in her new home. I've always wanted a cool looking garage for my dream truck. I'm 65 and this is likely my last house until I am in an old folk's home - hopefully a loog time from now! So if not this garage, when? This will be the one...eventually.

Paint, new floor - epoxy or VCT or RaceDeck, haven't decided. Don't really think I need a 60 gallon vertical compressor anymore, maybe something smaller. Put in a sink, hose reel. Going to erect a shed so all yard equipment, Christmas decorations, luggage, etc will NOT be in the garage. Probably be months before I get to it but I'll post pics here and also at GJ.

Kim57 04-21-2020 08:58 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
Looks real nice.
Kim

oldman3 04-21-2020 09:32 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
She looks good in her new home...Jim

slck57 04-21-2020 12:38 PM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
Nice!!! Congrat's on the new home..

G&R's57GMC 04-21-2020 08:41 PM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
Ata boy Dan congratulations on the new house and a great garage for the truck. ��

Race Deck is my vote . It goes down fast and lasts forever, comes in many styles, colors, sizes and finishes.

G&R's57GMC 04-21-2020 09:05 PM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
2 Attachment(s)
My Race Deck partially installed .
These are the drain through type .

To clean I just vacuum up the grit that drops through after the rainy season .

Dan in Pasadena 04-24-2020 01:21 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
How much noise does the Race Deck make just walking on it? I understand if you put geo fabric under it’s supposed to quiet it.

Since I’m in sunny Southern California there’s no need for the flow through type but I do have a bit of concern over it expanding in the heat of summer and buckling. I assume(?) the fix for this is leaving a gap at the walls of maybe 1/4”? Then covering that with some kind of baseboard. Anyone have an opinion on this concern?

bobinbc 04-24-2020 02:30 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
2 Attachment(s)
Congrats on the move Dan! I can really relate to the new garage! My first house had a good size shop ~1000sq ft but I sold that in the late 80's and have only had a single car garage to work in until we moved just a couple months ago!

I'm still setting up my shop (while I work in it!) but one thing I like is it has an epoxy painted floor. It's not the shiny poured epoxy just paint but it seems durable and everything cleans up easy. Although they look great one of my concerns about VCT or Race Deck tile is how easy is it when you want to sweep up? I can tell you that the painted floor is a breeze!

The single best thing I've done to the shop so far is put in LED lighting. Quiet and bright! I plan to properly do my shop after I finish the chassis and the body/paint work on my truck. It'll constantly be a mess until then lol

84blaze 04-24-2020 09:27 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
You guys should take a look at the garages Matt at Obsessed Garage consults on. He's on youtube and other social media platforms.

G&R's57GMC 04-24-2020 04:19 PM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
Dan the Race Deck is a stable product , it doesn't expand or contract .
It doesn't move under load even turning the wheels and supports 80,000 pounds .
The flow through doesn't make any noise when you walk on it .
I use it in other garage in the area where the tires roll and use the solid non shinny in areas everywhere else .
Except the area under the Airstream I used the shinny and slippery ones there so I could lay on the floor and slide under it . But it's slippery when wet .
The solid ones do make a slight hollow sound when walking on them.

When I installed them in the Airstream garage I cut them to fit around the feet of the lift in there.

I strongly recommend Race Deck . Call them and have them send you a sample of the flow through and solid .

G&R's57GMC 04-24-2020 04:50 PM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
3 Attachment(s)
Here's some more pic's

Black_Sheep 04-24-2020 07:19 PM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
3 Attachment(s)
I like my Racedeck but epoxy coating would have been my preference. Cost wise it's probably a wash, the nice thing about Racedeck is it only took an afternoon to install. Epoxy takes days due to the amount of prep work.

dsraven 04-24-2020 10:41 PM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
one shop I worked at had a special coating on the floor. it lasted a couple of minutes if brake fluid was spilled. it was also really slippery when wet like after a car wash or if the incoming vehicle had snow on the tires.....of course some of us DON'T HAVE TO WORRY ABOUT THE SNOW THING!!!
just saying, ask questions before you spend. I can remember a shriek from one of the guys in the shop when he came wheeling into the wash bay and slid right into the big spendy pressure washer because he couldn't stop due to slippery floor.

dsraven 04-24-2020 10:43 PM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
blacksheep, that is a SICK looking shop. awesome.
mine is a huge mess right now. body work. parts everywhere with dust on everything.
just installed a couple of 4 ft replacement led tubes and swapped out the old fluorescents. can't believe the difference in light.

Black_Sheep 04-25-2020 01:06 AM

Re: Danny Boy is BAACK! w/ '55 Big Window
 
1 Attachment(s)
Quote:

Originally Posted by dsraven (Post 8724846)
blacksheep, that is a SICK looking shop. awesome.
mine is a huge mess right now. body work. parts everywhere with dust on everything.
just installed a couple of 4 ft replacement led tubes and swapped out the old fluorescents. can't believe the difference in light.

That sounds like my garage up until a couple years ago. When the truck went to paint I gave it a beauty makeover. We like to entertain and are known for our kick ass garage parties so my wife agreed to a reasonable budget. I mudded and taped the drywall, primed, painted and did the Racedeck flooring. I got matching cabinets from U-Line and painted up my 35 year old toolbox to match. It's really a nice space to hang out in...


All times are GMT -4. The time now is 01:07 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com