Re: Two is easier then one 1965 GMC S/W/BB build
Quote:
|
Re: Two is easier then one 1965 GMC S/W/BB build
5 Attachment(s)
To be current and up to date.
Attachment 1825945 Attachment 1825946 Attachment 1825947 Attachment 1825948 Attachment 1825949 more coming |
Re: Two is easier then one 1965 GMC S/W/BB build
4 Attachment(s)
Attachment 1825952
Attachment 1825953 Attachment 1825954 Attachment 1825955 as of this morning, you are now up to date |
Re: Two is easier then one 1965 GMC S/W/BB build
Very nice. I like those front inners. Looking good
|
Re: Two is easier then one 1965 GMC S/W/BB build
A video of our shop/ tools and even some Big Block Chevy accessories we are selling off.
Walking through our shop. |
Re: Two is easier then one 1965 GMC S/W/BB build
That is nice. Cool tools. Is this your main occupation?
|
Re: Two is easier then one 1965 GMC S/W/BB build
Quote:
Greg is a registered nurse. We just pretend we are truck builders. ;) |
Re: Two is easier then one 1965 GMC S/W/BB build
Are we the first to use the rear wheel tubs to build front ones?
|
Re: Two is easier then one 1965 GMC S/W/BB build
It's the first time I've seen it
|
Re: Two is easier then one 1965 GMC S/W/BB build
Quote:
|
Re: Two is easier then one 1965 GMC S/W/BB build
Quote:
I'll say yours are the first I have seen since I did mine... |
Re: Two is easier then one 1965 GMC S/W/BB build
5 Attachment(s)
A little further along.
Attachment 1830324 Attachment 1830325 Attachment 1830326 Attachment 1830327 Attachment 1830328 |
Re: Two is easier then one 1965 GMC S/W/BB build
2 Attachment(s)
Forward inner wings are fabbed and ready to weld in. We are starting the inner panels as well.
Attachment 1830329 Attachment 1830330 |
Re: Two is easier then one 1965 GMC S/W/BB build
Quote:
|
Re: Two is easier then one 1965 GMC S/W/BB build
Quote:
I will say, yours are a ton more involved and should look a whole lot better than what I had. Mine were functional, but lacked the look I was hoping for... |
Re: Two is easier then one 1965 GMC S/W/BB build
Lot of work in fabrication
|
Re: Two is easier then one 1965 GMC S/W/BB build
Love this thread.
|
Re: Two is easier then one 1965 GMC S/W/BB build
Your build is what got me to join this forum! Can’t wait for the next installment of photos and updates. Amazing skills fabricating metal is something I wish I had learned when I was younger.
I enjoy following yours. :truck: |
Re: Two is easier then one 1965 GMC S/W/BB build
Quote:
Dang nice of you to say. Greg and I have made a lot of progress on finishing off the front clip and should be moving on to building the new core support and mount the large aluminum cross flow radiator Greg purchased. :metal: |
Re: Two is easier then one 1965 GMC S/W/BB build
5 Attachment(s)
Building the sheet metal for the engine compartment is challenging. The plan is to make it look like it was a factory creation. Lots of intricate multi compound curves and planes all forming what the factory could have done with a large stamping press. Lay out is time consuming.
We use a construction laser to project the finish point of one parts plane onto the curved part it will be married to. Attachment 1836705 Attachment 1836706 Attachment 1836707 Attachment 1836708 Attachment 1836709 |
Re: Two is easier then one 1965 GMC S/W/BB build
Fab work is looking great. The engine bay is more wide open now. It's hard to tell from the pictures, but is there enough room for full turning radius through the full suspension cycle? I didn't catch it if you already mentioned it.
|
Re: Two is easier then one 1965 GMC S/W/BB build
Quote:
Yes we tested full lock clearance. We removed the shock, removed the spring and remounted it, then we disconnected the sway bar. Mounted the tire and raised the lower control arm with a floor jack until it hit the limiter (This shock has a built in bump stop.) Once we had the wheel at full compression we swung it through its arc and had a full hand of clearance everywhere. :metal: |
Re: Two is easier then one 1965 GMC S/W/BB build
Really good stuff you two!! Eagerly awaiting more updates.
|
Re: Two is easier then one 1965 GMC S/W/BB build
A little video to update where we are as of this morning. We got kind of held up over the holiday.
https://www.youtube.com/watch?v=yJqe0s5AKZs |
Re: Two is easier then one 1965 GMC S/W/BB build
Quote:
that truck is wild man, couple questions for you.... where did you get those red truck covers? what hinges do you plan on using for the hood? fantastic build tho, the title of this build is "two is easier than one" still panning on building the other too? |
All times are GMT -4. The time now is 09:48 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com