Re: '60 GMC 4x4 Long Fenderside
Your link is broke, I think this is it though but I cant find where to vote. http://www.facebook.com/highdeserthd?ref=ts
Edit: never mind I found it, you have to like the page before you can see this: http://www.facebook.com/highdeserthd...42144182495596 |
Re: '60 GMC 4x4 Long Fenderside
Thanks Tony!!
|
Re: '60 GMC 4x4 Long Fenderside
Sure thing Jason, I hope he wins!
|
Re: '60 GMC 4x4 Long Fenderside
Go with a LubeLocker gasket and you wont need RTV.
http://lubelocker.com/products/products/view/2/3 I've got one and no drips, very nice piece! |
Re: '60 GMC 4x4 Long Fenderside
We'll find out tomorrow I guess Tony. Thanks again, and thanks to anyone else who helps him out!!
Bradley, I'll bet they are quite proud of that gasket! Looks like it would work very good though. I can't find the receipt for the gasket I bought, so I may put it on one diff, then RTV the other. If either of them leaks, I will see about ordering a couple of those. How much did it cost you? |
Re: '60 GMC 4x4 Long Fenderside
we got any pics of 60-66's with off road front bumpers?
|
Re: '60 GMC 4x4 Long Fenderside
I haven't really looked for them. I was planning on leaving the stock bumper and building a grille guard like A.T. rockdriller's
|
Re: '60 GMC 4x4 Long Fenderside
yeah i cant seem to find much debating on what your planing or a massive off road bumper for running over trees fences cars what ever might be in my way lol
|
Re: '60 GMC 4x4 Long Fenderside
LOL My son likes your idea!
|
Re: '60 GMC 4x4 Long Fenderside
|
Re: '60 GMC 4x4 Long Fenderside
5 Attachment(s)
Here is a few I just found.
|
Re: '60 GMC 4x4 Long Fenderside
ooo i really like the one on the green burben
|
Re: '60 GMC 4x4 Long Fenderside
bumper and a diving board all in one lol
|
Re: '60 GMC 4x4 Long Fenderside
2 Attachment(s)
One like this would use the stock bumper, and would work with the grill guard.
Attachment 955764 This one is just a beast! Attachment 955765 |
Re: '60 GMC 4x4 Long Fenderside
dam now thats what you need to run over some cars lol and the stock bumper one is interesting you could make something like on that green burben using the stock bumper easy enough i would think just bring it out like that one and build a top for it
|
Re: '60 GMC 4x4 Long Fenderside
i think i like that idea the most that would be way cooler then building a aftermarket looking bumper
|
Re: '60 GMC 4x4 Long Fenderside
1 Attachment(s)
Kro, this is the spot I was talking about in the P.M.
Thanks! |
Re: '60 GMC 4x4 Long Fenderside
Adjusted the brakes out, and took her down the road and back a couple of times, and she stops now!! One more step done!
We took off both diff covers, and found out that we have 3.53 gears in there, instead of the stock 3.92's. The ring gear has 46 teeth, and the pinion has 13. |
Re: '60 GMC 4x4 Long Fenderside
4 Attachment(s)
Well, we had our first teenage driver accident today. My son and I were working on the truck. He was supposed to back the truck out of the garage. He has seen me do it many times, and we have talked about what to do, and how to do it, as well as going over the basics just minutes before.
He forgot the part about ease off the clutch, and ease into the accelerator... and he forgot to put it in reverse. Not sitting in the drivers seat, it looked like reverse to me too. Before I had a chance to say anything, it was all over. The poor ladder didn't stand a chance... Attachment 956397 Attachment 956398 Neither did the sheet rock... of my rental house... Attachment 956399 So next weekends lesson will be in sheet rock repair! :metal: I know you are all concerned about the truck, she is OK, it almost scratched the paint on the bumper, but thankfully it did not! LOL Attachment 956400 So now, I can officially call him crash. :lol: |
Re: '60 GMC 4x4 Long Fenderside
I'm glad to hear it was a minor accident. That should be easy enough to repair and replace. Not making light of the situation, just glad it wasn't worse. My first accident as a teen was much worse :o
|
Re: '60 GMC 4x4 Long Fenderside
very nice your lucky the truck didn't end up on the other side of the wall lol! the master cylinder took a crap on my 64 one day and it was broken for weeks and i would just creep it around and into the garage when i would work on it and one day i was comin in alittle fast and ended up using the side of the house coming in the garage door to stop destroying all the brand new white aluminum siding my parents just put in haha
|
Re: '60 GMC 4x4 Long Fenderside
Quote:
I just look at it as a great learning experience, where no one... other than the ladder and the wall, got hurt. I can guarantee that he will remember it, at least for a little while. LOL It was a good example of how just a little mistake, can cause great damage. |
Re: '60 GMC 4x4 Long Fenderside
Haha my sister drove through a garage door and crunched a antique dresser that was inside being refinished with her first experience using a clutch.
|
Re: '60 GMC 4x4 Long Fenderside
Quote:
Quote:
OK, I guess the finish was postponed until August 4th. If you can, please vote for him. Thanks!! |
Re: '60 GMC 4x4 Long Fenderside
3 Attachment(s)
Didn't get anything done on the truck, but did get a motorcycle wheel chock built. Now just need to get it cleaned up and painted.
|
All times are GMT -4. The time now is 07:46 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com