Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Your welcome and the same to you Bubba!

Will try to get it in the mail today or tomorrow, thanks!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

looking to mount an 06 truck pedal in a 73-87, if your bracket will work i'll take one!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Several guys have used my bracket, but it had to be modified slightly. However, I'm not sure what they did to it.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Several guys have used my bracket, but it had to be modified slightly. However, I'm not sure what they did to it.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Can you check on the bracket I ordered I have still not received it .

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

You should have gotten it by now. PM me your address again and I will check on it this evening when I get home. Sorry for the delay.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Brian - I sent you a PM with the tracking number. The post office said it was delivered on the 26th. LMK.

Rob

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Rob sorry I have located the bracket , the wife put it away with the extra Christmas presents . Thx for the quick response

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

No worries, glad you found it!:metal:

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Rob,

Bought one of your brackets way back for my LQ9 (2006 Escalade) swap into a 1972 Blazer, but it isn't working out. Any recommendations based on the pictures below? The pedal part number appears to be correct for the Escalade, but the bolt pattern is more like the Vette pedal.

Probably should have double checked it before I powder coated it! Thanks
Attachment 1755543

Attachment 1755544

Attachment 1755545

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

CJ - Interesting, I have an 06 Tahoe motor and it has a different pedal than yours. It's a 5.3 motor so that could possible be the difference. Did you try just using the bottom hole and then bolting it in to see how it sits in the truck? Either that or you're going to have to drill 2 new holes to mount it. My apologies for the aggravation.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Paypal sent for pedal bracket. Thank you!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Will ship tomorrow. Thanks!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Got my bracket today, thank you for the quick shipping! Looks like I may be short some hardware? I have have two self drilling bolts and 2 nuts? Am I wrong?

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

You are correct. There should have been (5) .75" long 1/4 20 bolts. My apologies. I can refund you some money or get them in the mail today. Let me know. Once again, my apologies.

Rob

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Just mail it. Greatly appreciate it!!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Will do. Take care,

R

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

I have a pedal out of an 04 Envoy with the LM4. What are the chances these brackets will work on a '66 C10?

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Sorry for the late response, been on vacation. Several guys have used the pedal bracket in the 60-66 trucks with some minor mods.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Paypal sent for bracket, thanks!

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Thank you! Will ship tomorrow.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

PayPal sent for truck bracket.
Thanks

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Thanks! I need your shipping address.

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Just sent money to you sir. Thanks again!

-Nick

Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
 

Pedal should ship today, thanks!