![]() |
Re: Blood Sweat and Tears.. 67 Build Thread
Quote:
The thing about the pan is that I didnt even realize they have a full curved one out there and when I seen the 2 piece one I just clicked the Buy Now button like a dummy. |
Re: Blood Sweat and Tears.. 67 Build Thread
Well... that was a total waste of time and money... Not sure i can fix the blunder I made today. May have to cut that roll pan loose and order another one. Trying to fit those damn Camaro parking lights was a disaster.... I guess i should have done that part before making the grille fit the point in the center. :m5::waah:
|
Re: Blood Sweat and Tears.. 67 Build Thread
Look through Vic's CRLS build and you'll see him using a tool like this....
http://www.northerntool.com/shop/too...FVFlfgodIdYGmQ Did you modify the grill? |
Re: Blood Sweat and Tears.. 67 Build Thread
Quote:
|
Re: Blood Sweat and Tears.. 67 Build Thread
Too bad about the light install issue. And it can probably be fixed, it's only metal. Any pic's?
|
Re: Blood Sweat and Tears.. 67 Build Thread
5 Attachment(s)
Quote:
And the way I ended up only welding the pan to the grille and then welded sides onto the pan to allow bolts into the fenders will allow removal of fenders if something ever happens... or removal of just the grill and pan as one unit. On another note, I picked up this handy little attachment for the air hammer the other day when I stopped by Summit Racing for crimping edges of patch panels so that I can stop having to but weld everything... Works really nice and was only like 35 bucks. |
Re: Blood Sweat and Tears.. 67 Build Thread
I think the rollpan turned out nice and the panel crimper looks good too.
|
Re: Blood Sweat and Tears.. 67 Build Thread
Roll pan is a keeper!
|
Re: Blood Sweat and Tears.. 67 Build Thread
I hope the roll pan is going to work out the way you want. That is a neat tool.
|
Re: Blood Sweat and Tears.. 67 Build Thread
Look at this page on Vic's build....
http://67-72chevytrucks.com/vboard/s...shrink&page=15 Never used one but I think it's what you're looking for. Please don't abandon the fog lights! I really considered the same thing you're thinking, just doesn't fit my build as well as it would yours! Is there something out there that you could graft in? |
Re: Blood Sweat and Tears.. 67 Build Thread
I wish i would have known about that crimper attachment as i have the air hammer already, looks like it works ok!
|
Re: Blood Sweat and Tears.. 67 Build Thread
Now that i have had a better chance to read your thread, the shrinker is not a crimper like you have, Youtube has some great tips on shrinkers and stretchers, this guy is pretty good, watch what he does with the shrinker:
https://www.youtube.com/watch?v=aD0KsVmHc-w |
Re: Blood Sweat and Tears.. 67 Build Thread
Quote:
Quote:
Quote:
|
Re: Blood Sweat and Tears.. 67 Build Thread
I've heard using the crimper piece can introduce rust with the 2 layers overlapping, just keep that in mind, and watch out
|
Re: Blood Sweat and Tears.. 67 Build Thread
love the hood! great job overall!!
|
Re: Blood Sweat and Tears.. 67 Build Thread
I bought an aluminum dash gauge bezel that has two 4 1/4" and two 3 1/4" holes because I liked the look... Why cant I find gauges in those sizes?? I really like the AutoMeter American Muscle sets but the only ones they have are the
3 3/8" and 2 1/16" and 5" No combos in anything smaller than the 5" Looking for combo gauges for the smaller holes... suggestions please... |
Re: Blood Sweat and Tears.. 67 Build Thread
Possm, check out Metalmeet for learning metal shaping. I've picked up a few things from the group over the years.
Would the company selling the dash bezel have a recommendation for gauges? |
Re: Blood Sweat and Tears.. 67 Build Thread
Quote:
|
Re: Blood Sweat and Tears.. 67 Build Thread
5 Attachment(s)
Since my space is limited, I'm doing as much as I can to the bed sides before I pull it apart... Now that the 42 layers of different colors and bondo is all off Im rather surprised to see how good the overall shape is... no rust at all... Imagine that. I think the hardest part is going to be getting the areas around the tail lights worked out. May end up replacing the lower rear of the drivers side since its so deformed...
|
Re: Blood Sweat and Tears.. 67 Build Thread
Quote:
|
Re: Blood Sweat and Tears.. 67 Build Thread
Quote:
|
Re: Blood Sweat and Tears.. 67 Build Thread
It's amazing how much bondo people can form to resemble a truck ,been there and done that .
|
Re: Blood Sweat and Tears.. 67 Build Thread
Almost looks new.
|
Re: Blood Sweat and Tears.. 67 Build Thread
Too many other things going on to get anything done on this thing right now... Very much considering handing it over to the paint and body police... hate to see it every time I walk out into the garage looking the same as the last time I walked out there....
|
Re: Blood Sweat and Tears.. 67 Build Thread
Ya it's damn hard to get all this stuff done and enjoy the good weather when it's finally here.
|
All times are GMT -4. The time now is 12:01 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com