The 1947 - Present Chevrolet & GMC Truck Message Board Network - PA So 1 more 72 blazer going under the knife

Page 12 of 15

« First

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)

- - PA So 1 more 72 blazer going under the knife (https://67-72chevytrucks.com/vboard/showthread.php?t=699579)

English_C10

01-26-2019 05:36 PM

Re: So 1 more 72 blazer going under the knife

Front light wiring harness? Maybe even the radio with all the mounting components shipped to 49417 if still available.

1rippen6

01-26-2019 06:40 PM

Re: So 1 more 72 blazer going under the knife

Quote:

Originally Posted by English_C10 (Post 8451653)

Front light wiring harness? Maybe even the radio with all the mounting components shipped to 49417 if still available.

I should still have it, I look tomorrow.

1rippen6

01-27-2019 06:49 PM

Re: So 1 more 72 blazer going under the knife

1 Attachment(s)

Radio wasn't original, I found the light harness it's in decent shape. 45 plus shipping should fit in a medium flat rate for 15.

English_C10

01-27-2019 07:25 PM

Re: So 1 more 72 blazer going under the knife

Are the wires brittle at all? All connections present and in good shape not super corroded?

1rippen6

01-27-2019 07:43 PM

Re: So 1 more 72 blazer going under the knife

All connections are there, I will check corrosion and brittleness tomorrow and let you know.

1rippen6

01-29-2019 04:33 PM

Re: So 1 more 72 blazer going under the knife

2 Attachment(s)

Quote:

Originally Posted by Chevys4life (Post 8450866)

Since I have to order some parts for this gas tank setup, I will just get order some repro stuff. The truck is aged enough if you know what I mean. I can't figure out what to due with this thing. lol

Here is the cap, it does have something going on in the back.

Chevys4life

01-29-2019 04:53 PM

Re: So 1 more 72 blazer going under the knife

Thanks Rip........I ordered a new repro one.

1rippen6

01-29-2019 04:54 PM

Re: So 1 more 72 blazer going under the knife

3 Attachment(s)

Quote:

Originally Posted by English_C10 (Post 8452449)

Are the wires brittle at all? All connections present and in good shape not super corroded?

Wires are not brittle and all the connectors look good except the generator plug has some green but no terrible.

1rippen6

01-29-2019 04:55 PM

Re: So 1 more 72 blazer going under the knife

Quote:

Originally Posted by Chevys4life (Post 8454003)

Thanks Rip........I ordered a new repro one.

Good deal.

Nicks33

01-29-2019 07:16 PM

Re: So 1 more 72 blazer going under the knife

Hello, how about the adjuster sleeve for adjusting the shift linkage rod at the column arm. Also the license plate bracket? Thanks, Nick

CHEVY_DUDE

01-29-2019 11:04 PM

Re: So 1 more 72 blazer going under the knife

Any chance you have the 4x4 specific outer front bumper brackets?

CoolK5

01-29-2019 11:27 PM

Re: So 1 more 72 blazer going under the knife

What condition is the transfer case shifter knob in?

1rippen6

01-29-2019 11:36 PM

Re: So 1 more 72 blazer going under the knife

Quote:

Originally Posted by CHEVY_DUDE (Post 8454304)

Any chance you have the 4x4 specific outer front bumper brackets?

Sorry, only thing left is rears

Quote:

Originally Posted by Nicks33 (Post 8454120)

Hello, how about the adjuster sleeve for adjusting the shift linkage rod at the column arm. Also the license plate bracket? Thanks, Nick

I'll get you some pictures tomorrow.

Quote:

Originally Posted by CoolK5 (Post 8454326)

What condition is the transfer case shifter knob in?

Sorry, already sold.

CHEVY_DUDE

01-31-2019 10:30 AM

Re: So 1 more 72 blazer going under the knife

Any chance you have another fuel neck cover?

1rippen6

01-31-2019 10:37 AM

Re: So 1 more 72 blazer going under the knife

Quote:

Originally Posted by CHEVY_DUDE (Post 8455409)

Any chance you have another fuel neck cover?

Sorry, I don't but they are repopin them now.

1rippen6

01-31-2019 10:53 AM

Re: So 1 more 72 blazer going under the knife

4 Attachment(s)

Quote:

Originally Posted by Nicks33 (Post 8454120)

Hello, how about the adjuster sleeve for adjusting the shift linkage rod at the column arm. Also the license plate bracket? Thanks, Nick

Is this what your looking for.

Nicks33

01-31-2019 11:17 AM

Re: So 1 more 72 blazer going under the knife

Yes, but I just need the Pinch bolt that goes into the shifter rod, not the rod, picture #2, thanks

1rippen6

01-31-2019 04:44 PM

Re: So 1 more 72 blazer going under the knife

Quote:

Originally Posted by Nicks33 (Post 8455448)

Yes, but I just need the Pinch bolt that goes into the shifter rod, not the rod, picture #2, thanks

I'll do 10 plus shipping on the pinch bolt do you still need the license plate holder? It does have a couple extra drilled holes and is bent some. The bend should flat out fine 25 plus shipping.

Nicks33

01-31-2019 08:34 PM

Re: So 1 more 72 blazer going under the knife

Shipping for the plate holder and bolt. Thanks

1rippen6

01-31-2019 10:33 PM

Re: So 1 more 72 blazer going under the knife

Quote:

Originally Posted by Nicks33 (Post 8455867)

Shipping for the plate holder and bolt. Thanks

Send me your zip and I'll get you a quote.

Madkidd007

01-31-2019 10:47 PM

Re: So 1 more 72 blazer going under the knife

If the license plate bracket doesn’t sell. I’ll take it.

1rippen6

01-31-2019 10:48 PM

Re: So 1 more 72 blazer going under the knife

Quote:

Originally Posted by Madkidd007 (Post 8455980)

If the license plate bracket doesn’t sell. I’ll take it.

Ok, I'll let you know.

Nicks33

02-01-2019 07:30 AM

Re: So 1 more 72 blazer going under the knife

Sorry 28117, NC

1rippen6

02-01-2019 02:33 PM

Re: So 1 more 72 blazer going under the knife

Quote:

Originally Posted by Nicks33 (Post 8456142)

Sorry 28117, NC

Looks like 13 shipping, looks like 49.33 shipped with PP fees.

Nicks33

02-01-2019 03:10 PM

Re: So 1 more 72 blazer going under the knife

Pp on its way

All times are GMT -4. The time now is 06:18 PM.

Page 12 of 15

« First

Show 40 post(s) from this thread on one page