Re: My 52 GMC Build
 

Did he add the large truck hood to it? I haven't seen any large trucks down here be a crew cab. Definitely a cool rig! Did you go with the sound deadner version of lizard skin?

Re: My 52 GMC Build
 

He started with the whole IH truck and cut the firewall out and grafted it to the quad cab of something if I recall. Yes I did the sound control and ceramic temp insulation. Sound control definitely muffles any tinny noise. I'll have my before and after vid tomorrow.

Re: My 52 GMC Build
 

Today I made some side splash aprons. I made the passenger side in 3 pieces so I could get them into place the way I wanted. Drivers is one piece. All 20ga sheet. Definitely looks good covering the 3" exhaust pipe.
Attachment 1445805

Attachment 1445806

Re: My 52 GMC Build
 

This is the before and after vid of the lizard skin
http://youtu.be/GymwCS3Mxqo

Re: My 52 GMC Build
 

Lower, metal work looks good. I really like your video of the before and after. Used Lizard Skin on my truck build and wasn't that impressed. Probably because I didn't have a thick enough film buil up. It made a big difference on the sound in your truck. Anyway, thanks for taking the time to put it together!

Re: My 52 GMC Build
 

Thanks AD. I really made sure I was putting it on according to there instructions. I got .040" of each product .080" total on all surfaces. Sorry it didn't work out for you the stuff is not cheap.

Re: My 52 GMC Build
 

This weekend I picked up some gas shocks for the bed and put them in. I'm happy with how they work and they lift higher that I was hoping. Quick vid.
http://vid51.photobucket.com/albums/...psiic9mspg.mp4

Re: My 52 GMC Build
 

I wanted to put a line lock in the truck. My Dad just happened to have one to give me.:metal:
Attachment 1447072

Re: My 52 GMC Build
 

As requested by BC Toy chest. Thanks. More pics of my rear half lifting fenders. Truck is all the way up right now.
Attachment 1447396

Attachment 1447399

Attachment 1447397

Attachment 1447398

Re: My 52 GMC Build
 

Last night I pulled the front clip off to finish up some stuff on the fenders before paint. You can now see how all this motor fits in the big front end. I also started scraping off the crud from inside the fenders, the vibrating scraper made quick work of it.
Attachment 1447400

Attachment 1447401

Attachment 1447402

Attachment 1447403

Re: My 52 GMC Build
 

all that stuff your doing sure adds up in time. how much were the gas shocks? yeah they def open up higher than I expected too.

Re: My 52 GMC Build
 

Not sure how I missed this build before. Just read the whole thread........awesome!!

Re: My 52 GMC Build
 

Yes it does, I'm working on it every chance I get. The gas shocks where $11 ea at Princess Auto. I think its like your Harbor Freight.
Thanks Coach

Re: My 52 GMC Build
 

Nice job on the tilt bed.Your build is moving along quickly. Will it be on the road next summer?

Re: My 52 GMC Build
 

Yes the goal is to drive it to the Unfinished Nationals car show beginning of June 2016 :bann:

Re: My 52 GMC Build
 

The gas struts worked really well. Nice design. You mentioned paint...whole truck or inside of fenders? That vibrating scraper looked pretty handy...now I NEED one...lol.
Great build, really enjoying tagging along.

Re: My 52 GMC Build
 

Thanks AD Paint under hood and Bottom of truck. The top side is getting a flat clear the color it is. Ya the scraper is handy. It's always dangerous when you see tools you "NEED" lol

Re: My 52 GMC Build
 

looking good. I had alot of that rubber stuff under my fenders. I need one of those tools now too!! actually I need so many tools I literally can't even begin to tell you.

Re: My 52 GMC Build
 

A few quick vids I uploaded
https://youtu.be/bm6Pb1Mi4vk

https://youtu.be/YakvtUOhCJQ

Re: My 52 GMC Build
 

Sounds wicked cool!

Re: My 52 GMC Build
 

That sounds cool!!

Re: My 52 GMC Build
 

very cool

Re: My 52 GMC Build
 

Thanks Guys. I can't wait to hear it under power.

Re: My 52 GMC Build
 

So yesterday and today I finished up the front inner and outer fenders, little it of cutting, welding and sanding. Also over about 3 days got the top of the box sides all welded up to the round tube. Tig welded 160" 1" stitch at a time, bit of sanding and done. Today I made up the front shock mounts. I'm using front s-10 shocks. They are Monroe load adjusting.

Attachment 1449512

Re: My 52 GMC Build
 

what do you know? I just looked at those shocks the other day, I have a lowered blazer that is a little jouncy even with new springs and heavy duty shocks. you'll have to let me know how they work, I passed over them for their high cost but wondered.