Re: The 60-66 "PAYING IT FORWARD" thread!
Please read post #1. This is NOT a WTB thread.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
My apologies Jay
Bubba |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
^^^we're going to need pics of this transaction!^^^
Nice offer. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Yes, in '65 Chevy offered a red trimmed seat (on certain colored trucks) if you didn't know. If it's orig, I just might make the drive! |
Re: The 60-66 "PAYING IT FORWARD" thread!
4 Attachment(s)
Hi everyone! I have a few things I need to see if anyone wants. Let's start with four items. I have two complete torsion bar front ends one is from a '62 Chevy c30 dually, the only thing I've done to this is remove it from the truck. the second one is from a '62 GMC 1500 series, it was ordered from factory (Oakland) with one ton brakes it has new ball joints and tie rod ends plus we turned the drums and replaced wheel bearings, brake pads and wheel cylinders. I feel really bad about just dropping these of at the scrap yard. I'm located in the bay area in California. I'd like for someone to just take them all complete but if it seems that no one is into that then I would be willing to part them out if anyone needs specific parts. Third item is a 305 v6 that came out of the GMC, it ran fine when we pulled it out (probably ten years ago) It has the bell housing for the sm420. Fourth item is the rear end out of the Chevy, I'm not even sure what it is but it needs to be rebuilt that is for sure. sorry for the crappy pictures! I can get better ones and I will get some of the engine as well. It is buried in the back of the garage, I haven't seen it in many years. v
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I wouldn't mind taking the dog off your hands! :lol:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Edited by Forum Staff
This thread is for our generous members willing to give away parts for free. NOT for members to ask for free parts. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
" I'd like for someone to just take them all complete but if it seems that no one is into that then I would be willing to part them out if anyone needs specific parts" |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
While I don't need all of the other parts, I would be more than happy to pay the freight on that bell housing if you would be willing to ship it to Fresno. I could even meet you part way and cover your costs on the gas, meet you in Gilroy, etc.
Just need to confirm that the bellhousing has the fork opening and the mount on the passenger side? Tom |
Re: The 60-66 "PAYING IT FORWARD" thread!
I have a nice clean gas tank. Outside of Philly. Prefer pickup. Can send photos if interested.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
2 Attachment(s)
I have 2 lenses for a fleetside. Original GM, Good shape except for a slight sliver of plastic on one of them you can see in the pictures. Just dirty, should clean up well. Yours for the taking, just shipping.
Thanks John |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Right now the lenses are being taken by Grizz1963. I will let you know if it falls through.
Thanks John |
Re: The 60-66 "PAYING IT FORWARD" thread!
I have a 65 LWB frame only. No suspension. Will not ship. Grand Rapids area
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
Free to anyone that wants to come pick up. I'm in Seattle (Greenwood). Steering column support and clutch petal for 60-66. Exactly as pictured.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Parcel landed. Next step is repair cracked side and then proceed with polishing etc. |
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
Complete 65 c-20 front end drum to drum. Manual steering box included. hardware. Eaton HO rear end. It pushed the truck before I took it off. It's not moving and I need the space. I have removed them from my chassis, but don't have any close ups on them. Available upon request. Bakersfield ca.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Jimbo, PM sent!
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Fender welting, new and two vent window handles, new reproduction, free.. please PM me if interested. Thank you.
Pictures available in WI One Group of Parts 1960 - 1966 Sincerely, |
Re: The 60-66 "PAYING IT FORWARD" thread!
4 Attachment(s)
Have a roof section (64-66) that has some good patch pieces in it. Do not want to mess with shipping. Located in Pittsboro NC. Through work I run a parts shuttle to 8 other locations throughout the state so could possibly make it closer for someone if they wanted it. Let me know....
Thanks, Attachment 1604987 Attachment 1604988 Attachment 1604992 Attachment 1604993 |
Re: The 60-66 "PAYING IT FORWARD" thread!
Hey suedepaint sent you a message
|
All times are GMT -4. The time now is 02:13 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com