Re: D52 Caliper Rear Disc Brake Brackets
1 Attachment(s)
I got mine mocked up last night with the eldorado calipers. My question is does this look correct? The lever seems to be very close to the bracket because of that nub that limits how far back it can go.
|
Re: D52 Caliper Rear Disc Brake Brackets
Zach, is that the same caliper you posted a pic of in post #455 above? If so, my apologies. That nub will need to be cut off or ground down to clear the lever. I guess I wasn't looking at that previous pic correctly.
|
Re: D52 Caliper Rear Disc Brake Brackets
Quote:
By the way, excellent job on the brackets, they fit great! |
Re: D52 Caliper Rear Disc Brake Brackets
I would like a set of your uncoated brackets for a 72 c10 and also e-brake levers for Eldorado calipers thanks mitch
|
Re: D52 Caliper Rear Disc Brake Brackets
Mitch, I will send you a PM with ordering and payment info. :)
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Do you have the brackets for a 85 c10 10 bolt rearend and how much are they?
Thanks. |
Re: D52 Caliper Rear Disc Brake Brackets
The answers to your questions are in post #1 of this for sale thread........
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Pm'd you Captainfab
|
Re: D52 Caliper Rear Disc Brake Brackets
I replied to your PM. You did not specify which rear disc brackets you were interested in.
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
'92-'02 AWD Astro...............NOT to be mistaken for the Ford Aerostar AWD....like i did.
Grrrrrrrrrrrrrrrr. the bolt pattern was wrong. Back to the pick and pull I go. |
Re: D52 Caliper Rear Disc Brake Brackets
PM sent Captain Fab
|
Re: D52 Caliper Rear Disc Brake Brackets
PM replied to. :)
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
http://www.wilwood.com/BrakeKits/Bra...no=140-11385-D
Ok I've gotta run these rotors and calipers cause I've got 5 4 3/4 axles. Will these brackets work. I don't like the wilwoodo kit because they make me buy the parking brake kit. Trying to save a few bucks! |
Re: D52 Caliper Rear Disc Brake Brackets
The Astro/Safari rotors have the 5 x 5" wheel stud pattern. That is why they are used for this C10 application. If you must have a rotor for a 5 x 4.75" wheel stud pattern, you will have to redrill the Astro/Safari rotors. The other option is that I have been working on a set of rear disc brackets for trucks with the 5 x 4.75" wheel stud pattern. With those you have the option of a standard front caliper or an e-brake caliper. I just do not have a for sale thread for them yet. Send me a PM if you are interested.
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Alright all this brake talk has me lost.What wilwood kit works with this kit..I'm tryin to figure out a price for everything. Is there a website for this or no
|
Re: D52 Caliper Rear Disc Brake Brackets
If you want to run the Wilwood dual piston D52 calipers you simply need the Calipers with the 1.25" diameter pistons for the 1.28" thick rotors in your choice of color.
Here is Wilwood's website. http://www.wilwood.com/Calipers/Cali...spx?subname=GM D52 Dual Piston Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Yes, my D52 brackets are designed to accept the Wilwood dual piston calipers.....just as shown in the pics.
Your front rotors could be 1" thick or 1.25" thick. I do not know what you have. On the front you will want to run the Wilwood dual piston D52 calipers with the 2" diameter pistons. Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Hi I'm interested in a set of brackets. Do you have any in stock?
Thanks Joe |
Re: D52 Caliper Rear Disc Brake Brackets
Hey Captain; I talked to you awhile ago about me swappin a 66-12 bolt to my 94 GMC !!! You said it would work no problem and I agreed but I decided to change the 12 bolt a little !! I might be shortening the 12 rear diff a couple of inches and adding the Torino ends to it too !! Will I still be able to use your brackets !!! Thanks
|
Re: D52 Caliper Rear Disc Brake Brackets
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
I replied to both of your PM's :)
Quote:
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
No. None of my rear disc brackets will bolt up to a Torino housing end. They are all designed to bolt up to the Impala/Truck backing plate bolt pattern.
If you are shortening the housing, why not use these ends so you can use the D52 rear disc brackets instead of Ford brakes of some sort? http://www.moserengineering.com/othe...lip-axles.html I have the base plates already machined to act as the bearing retainer with these housing ends. When you order your axles you will need to be sure to order them with the correct brake offset. Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Thanks Captain; Not sure that I am going to cut any off( but I want too)so I guess I will have to check with some other people and see what I can do !! I really do love your setup though and who knows what will happen as I have to do some motor work first and get that out of the way !!! It now looks like I have some options so that is great !! Will let you know when I do it and keep up the great work too !! Thanks for all your efforts !!!!!!
|
Re: D52 Caliper Rear Disc Brake Brackets
I'm in!! I'd like to get a set.
|
Re: D52 Caliper Rear Disc Brake Brackets
I will send you a PM with ordering and payment info.
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Payment sent.
|
Re: D52 Caliper Rear Disc Brake Brackets
Payment received and PM replied to :)
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
I received my brackets today and they look great. Also I told John I needed these brackets as soon as possible because I had my truck on stands waiting to finish the install and he went out of his way to get the to me asap.
Thanks again John I really appreciate the great service and product. Joe |
Re: D52 Caliper Rear Disc Brake Brackets
Bob. The brackets I made for you do not utilize D52 calipers. They use D154 calipers which are similar but smaller. Did your calipers come with the levers, cable brackets and springs? The cable housing attaches to the cable bracket with a clip and the cable itself goes up thru thru spring and connects to the notch in the lever.
Quote:
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Capt, looking for a set of brackets for a 68 C10, purchased the 5 on 5 axle conversion from summit, would like to upgrade with these at the same time. Let me know how to pay
|
Re: D52 Caliper Rear Disc Brake Brackets
I replied to your PM :)
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
payment sent via paypal
|
Re: D52 Caliper Rear Disc Brake Brackets
Payment received.
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
thx
|
Re: D52 Caliper Rear Disc Brake Brackets
Won't these brakes cause pad knockback on the 12-bolt?
|
Re: D52 Caliper Rear Disc Brake Brackets
What do you mean by "pad knockback"?
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Quote:
http://www.stoptech.com/technical-su.../pad-knockback On full-floating rears this isn't an issue, but with our 12 bolts there's some axle endplay that causes pad knockback. Floating calipers get around this with the ability to move with the hub. Fixed calipers like these do not. An alternative solution although not 100% effective is to use c-clip eliminators which hold the axle in place to a much greater degree. So I guess the answer is that these calipers are ok if you are running c-clip eliminators. |
All times are GMT -4. The time now is 08:04 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com