The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 133 of 197 « First 3383123128129130131132 133 134135136137138143183 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today.The 3rd chapter (https://67-72chevytrucks.com/vboard/showthread.php?t=773345)

72c20customcamper 10-03-2022 06:12 PM
Re: What did you do to your truck today.The 3rd chapter
 
4 Attachment(s)
When was the last time you saw an oem inner fender with zero rust .

mr.mud1 10-03-2022 06:33 PM
Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
i'm pretty lucky,i have 2 but i know they're few and far between.

Johnl48 10-03-2022 07:07 PM
Re: What did you do to your truck today.The 3rd chapter
 
Quote:
Originally Posted by Chevys4life (Post 9130255)
Man...........that paint job looks good. Is that single or two stage?
2 stage

68bowtie 10-03-2022 09:14 PM
Re: What did you do to your truck today.The 3rd chapter
 
Quote:
Originally Posted by 72c20customcamper (Post 9130346)
When was the last time you saw an oem inner fender with zero rust .
A truly rust free passenger side is certainly hard to find :)

Already Gone 10-03-2022 09:34 PM
Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
Yesterday me and a friend used my Burb and took my newly built SBC to the shop so it can be installed in its new home, my C10.

mr.mud1 10-03-2022 09:48 PM
Re: What did you do to your truck today.The 3rd chapter
 
Quote:
Originally Posted by Already Gone (Post 9130413)
Yesterday me and a friend used my Burb and took my newly built SBC to the shop so it can be installed in its new home, my C10.
looking good.

68bowtie 10-04-2022 12:00 AM
Re: What did you do to your truck today.The 3rd chapter
 
Wow I’ll say! Hot dog!

'68OrangeSunshine 10-04-2022 12:10 AM
Re: What did you do to your truck today.The 3rd chapter
 
Quote:
Originally Posted by 72c20customcamper (Post 9130346)
When was the last time you saw an oem inner fender with zero rust .
Not since back when people called them ''Fender Skirts.''

Already Gone 10-04-2022 02:20 AM
Re: What did you do to your truck today.The 3rd chapter
 
3 Attachment(s)
Quote:
Originally Posted by mr.mud1 (Post 9130358)
i'm pretty lucky,i have 2 but i know they're few and far between.
One of mine, drivers side at front, needed a small patch. Took to a shop and it was fixed properly.

72c20customcamper 10-04-2022 08:46 AM
Re: What did you do to your truck today.The 3rd chapter
 
Quote:
Originally Posted by mr.mud1 (Post 9130358)
i'm pretty lucky,i have 2 but i know they're few and far between.
Definitely not easy to find
Quote:
Originally Posted by 68bowtie (Post 9130405)
A truly rust free passenger side is certainly hard to find :)
These came off an Arizona suburban that the owner lowered and put tubes on
Quote:
Originally Posted by '68OrangeSunshine (Post 9130499)
Not since back when people called them ''Fender Skirts.''
We used to call them inner skirts

72c20customcamper 10-04-2022 08:48 AM
Re: What did you do to your truck today.The 3rd chapter
 
Quote:
Originally Posted by Already Gone (Post 9130413)
Yesterday me and a friend used my Burb and took my newly built SBC to the shop so it can be installed in its new home, my C10.
That's my next project not this truck but my Anniversary truck engine is very tired
Quote:
Originally Posted by Already Gone (Post 9130514)
One of mine, drivers side at front, needed a small patch. Took to a shop and it was fixed properly.
They did a great job

72c20customcamper 10-04-2022 02:31 PM
Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
Raining today so I repainted the grille bowtie I think the color is to red and shiny compared to the fender emblem . I used satin paint maybe flat would be better

'68OrangeSunshine 10-04-2022 03:03 PM
Re: What did you do to your truck today.The 3rd chapter
 
Quote:
Originally Posted by 72c20customcamper (Post 9130654)
Raining today so I repainted the grille bowtie I think the color is to red and shiny compared to the fender emblem . I used satin paint maybe flat would be better
The ''Red'' color of the Sixties Bowtie was more of a Tomato red than Crayola Red. Redder than Chevy Engine Orange or Hugger Orange but not as red as fresh blood. [The same color was used on the cover of the '67 Chevy Truck Owners Manual.]
Your new paint looks pretty much like they did when brand new. [At least as far as one can tell on a computer. In person, in full sunlight, it may be more obvious.]
Red is a color that tends to fade from Sun exposure.

Keep what you got and move on. If it bugs you, use the same color on your other badges, so they all match.

LNP 10-04-2022 03:11 PM
Re: What did you do to your truck today.The 3rd chapter
 
You guys are doin some great work

72c20customcamper 10-04-2022 04:55 PM
Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
Quote:
Originally Posted by '68OrangeSunshine (Post 9130669)
The ''Red'' color of the Sixties Bowtie was more of a Tomato red than Crayola Red. Redder than Chevy Engine Orange or Hugger Orange but not as red as fresh blood. [The same color was used on the cover of the '67 Chevy Truck Owners Manual.]
Your new paint looks pretty much like they did when brand new. [At least as far as one can tell on a computer. In person, in full sunlight, it may be more obvious.]
Red is a color that tends to fade from Sun exposure.

Keep what you got and move on. If it bugs you, use the same color on your other badges, so they all match.
I dont think it will be to noticable as they arent close to each other on the truck. I was going to buy a new one but I think it will be fine on the truck . And it’s an OEM piece

72c20customcamper 10-04-2022 05:07 PM
Re: What did you do to your truck today.The 3rd chapter
 
Quote:
Originally Posted by LNP (Post 9130676)
You guys are doin some great work
There are a lot of very talented craftsman on this site

LNP 10-05-2022 08:47 AM
Re: What did you do to your truck today.The 3rd chapter
 
Quote:
Originally Posted by 72c20customcamper (Post 9130703)
There are a lot of very talented craftsman on this site
Yes there are and you seem to be one of them.

Johnl48 10-06-2022 02:47 PM
Re: What did you do to your truck today.The 3rd chapter
 
Some assembly required

https://www.beamingpix.com/images/20...y_1024x768.jpg

https://www.beamingpix.com/images/20...y_1024x768.jpg

https://www.beamingpix.com/images/20...y_1024x768.jpg

https://www.beamingpix.com/images/20...y_1024x768.jpg

crazyjeenyus 10-06-2022 03:52 PM
4 Attachment(s)
Got started on the post-chop body work.
Posted via Mobile Device

Jiggers72-GMC 10-07-2022 07:28 AM
Re: What did you do to your truck today.The 3rd chapter
 
I'm not sure if its just the picture angle but why is the wheel so far ahead and not centered in the opening ???

crazyjeenyus 10-07-2022 09:05 AM
Quote:
Originally Posted by Jiggers72-GMC (Post 9131665)
I'm not sure if its just the picture angle but why is the wheel so far ahead and not centered in the opening ???
The box is sitting back on the frame so the sanding tools don’t scuff the clear coat on the back of the cab…..
Posted via Mobile Device

crazyjeenyus 10-07-2022 09:08 AM
1 Attachment(s)
Quote:
Originally Posted by crazyjeenyus (Post 9131685)
The box is sitting back on the frame so the sanding tools don’t scuff the clear coat on the back of the cab…..
Posted via Mobile Device
Posted via Mobile Device

72c20customcamper 10-07-2022 11:03 AM
Re: What did you do to your truck today.The 3rd chapter
 
4 Attachment(s)
Quote:
Originally Posted by crazyjeenyus (Post 9131685)
The box is sitting back on the frame so the sanding tools don’t scuff the clear coat on the back of the cab…..
Posted via Mobile Device
First picture was deceiving.

Got the new wire drive wheel for the mig . Night and day difference welding light steel . After I blasted the fender I found a few perforations so I cut more out of the donor fender .

OregonNed 10-07-2022 12:12 PM
Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Changing things up by putting on some of the deluxe marker lights.

zellway 10-07-2022 01:48 PM
Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
Need to clean up the engine bay but I finally got the last little parts to get my belt drive system installed. This is the same setup I run on my suburban. Stock fan shroud with a 2008 Jeep Grand Cherokee electric fan works great in the arizona heat. Having ac next summer will be so nice


All times are GMT -4. The time now is 12:46 PM.
Page 133 of 197 « First 3383123128129130131132 133 134135136137138143183 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com