Re: Used Parts Build
This was my weekend.
http://i20.photobucket.com/albums/b2...723_114752.jpg http://i20.photobucket.com/albums/b2...724_140951.jpg I'll post up a bunch of pics tomorrow. I'm beat. |
Re: Used Parts Build
Here are the pics and write up from this weekend: http://www.67-72chevytrucks.com/vboa...d.php?t=713378
|
Re: Used Parts Build
Got this on Friday
http://i20.photobucket.com/albums/b2...0607104524.jpg They have a 30 day rent back. So I wont be moving in for a month. Which also means I need to get my truck a roller in 30 days. |
Re: Used Parts Build
Got my bed assembled and on the truck
http://i20.photobucket.com/albums/b2...730_183338.jpg http://i20.photobucket.com/albums/b2...730_183430.jpg Started making the mounts http://i20.photobucket.com/albums/b2...730_212850.jpg Lots of props and clamps http://i20.photobucket.com/albums/b2...731_170529.jpg http://i20.photobucket.com/albums/b2...731_182217.jpg http://i20.photobucket.com/albums/b2...731_182223.jpg http://i20.photobucket.com/albums/b2...731_191015.jpg Got four done before it got too dark and ran out of steel. |
Re: Used Parts Build
Looking great man!
|
Re: Used Parts Build
nice work.
|
Re: Used Parts Build
congrats on the house...nice work
|
Re: Used Parts Build
Congrats on the house.
remind me...you cut down a long bed right? Are you not cutting the 6" off of the back of the bed? |
Re: Used Parts Build
Quote:
Quote:
Quote:
Quote:
|
Re: Used Parts Build
Making more mounts
http://i20.photobucket.com/albums/b2...803_230417.jpg http://i20.photobucket.com/albums/b2...804_195124.jpg The idea http://i20.photobucket.com/albums/b2...804_195045.jpg Cut. The other pieces are to support the 4 link crossmember. http://i20.photobucket.com/albums/b2...804_220713.jpg Holes drilled http://i20.photobucket.com/albums/b2...804_233550.jpg Bought a new tool. Need to weld some braces to it and build a stand http://i20.photobucket.com/albums/b2...804_234015.jpg |
Re: Used Parts Build
SWEET!
Reinforce the frame (the arms want to splay) Also make a wheel for it, instead of a crank. I bent 1" 16ga tubing around an S10 rim, and made spokes out of 3/4". Steering wheels work well too. http://gwellwood.com/wordpress/wp-co...35-480x360.jpg http://gwellwood.com/wordpress/wp-co...84-360x480.jpg Got a skateboard wheel? I made a tipping wheel with a Princess Auto (Harbor Freight) sprocket with the teeth ground off. http://gwellwood.com/wordpress/wp-co...e-360x480.jpeg |
Re: Used Parts Build
Quote:
started bracing it. Need to get a steering wheel still. Good idea for the tipping wheel. Do you know anyone who makes extra dies for it? |
Re: Used Parts Build
Filled a bunch of holes on my tailgate:
http://i20.photobucket.com/albums/b2...806_191616.jpg Got my bed mounts done: http://i20.photobucket.com/albums/b2...806_191653.jpg Bed is all bolted on and together. Made some shims to get it to the proper height. Didn't get any pics though. Then this happened: http://i20.photobucket.com/albums/b2...5528764183.jpg Grinding some metal and had a bit get behind my safety glasses. By the way they use a bur to remove the rust ring that forms where the metal was. |
Re: Used Parts Build
Been trying to get the truck together enough to tow it to my new place.
http://i20.photobucket.com/albums/b2...828_112515.jpg And I had to puppy sit this guy again http://i20.photobucket.com/albums/b2...825_192917.jpg Anyway, on to the truck stuff. Got my steering all together. http://i20.photobucket.com/albums/b2...821_140501.jpg I went to put a set of wheels on that I got as take offs from the Cannonball C10 but they were too wide and the backspacing wouldn't let me even get the wheel on the lugs. I pulled a wheel off my 66 just to give me an idea of what wheels I can run. I am probably going to get some inexpensive steel ones just to get me rolling. http://i20.photobucket.com/albums/b2...826_165036.jpg http://i20.photobucket.com/albums/b2...826_165046.jpg These wheels are 205/60/15 so they are only 26''. I am probably going to run a 235/65/17 to give me a 30'' tire (which I should lay out on). |
Re: Used Parts Build
Congrats on the new place!
I have been to the eye doctor to many times for my own good to get metal and rust out of my eye. Its not real fun, but the tools are cool! |
Re: Used Parts Build
I had a co-worker once that had previously worked as a welder, he said he got stuff in his eyes pretty often. He said they'd put a Q-tip gently against the eye next to the metal and twist it slowly, the fuzz would grab the metal and pull it out. It's no substitute for professional medical treatment, but might help in a pinch. Congrats on the house.
|
Re: Used Parts Build
I had my right eye removed. Now I am 50% less likely to get metal in my eye. :)
Because of that, I wear glasses with the foam around them to make a good seal and also use a shield whenever possible. When you only have one left you need to take care of it. |
Re: Used Parts Build
I think Eastwood sells fancy dies for the same machine. The dies yours and mine come with are really just for rolling beads. Eastwood has fancier.
I have a lathe, so I tend to make my own :) |
Re: Used Parts Build
Quote:
|
Re: Used Parts Build
Quote:
|
Re: Used Parts Build
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: Used Parts Build
I epoxy coated my garage floor last night: http://www.67-72chevytrucks.com/vboa...d.php?t=716686
|
Re: Used Parts Build
Sweet build and very informative! I'm anxious for you to start on your 66. I have a 63 I need ideas for.
|
Re: Used Parts Build
Quote:
|
Re: Used Parts Build
And she is holding her own weight!
http://i20.photobucket.com/albums/b2...910_173114.jpg Need to cut my fenders and bed to air down completely but she rolls! We kinda... The back driver wheel seems to be dragging on something. Not sure if it is the caliper or something else but its good enough to trailer it over to my new place. |
All times are GMT -4. The time now is 07:46 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com