Re: My 52 GMC Build
 

Will do. I think I payed $80 cdn for the pair.

Re: My 52 GMC Build
 

Got the rear all pulled apart. The plan is that Monday morning to pull the cab.
Attachment 1449769

Attachment 1449770

Re: My 52 GMC Build
 

don't you just luv taking it all apart when it takes so long to put together in the first place!!!!!!!!!!!

Re: My 52 GMC Build
 

I agree very discouraging. But the next time I put a bolt in, it should be for good.

Re: My 52 GMC Build
 

Today I pulled the cab. To all the guys on this forum that have posted this method of lifting the cab. Thankyou!!!!!! Lifted straight and solid.
Attachment 1451103

Attachment 1451104

Attachment 1451105

Attachment 1451106

Attachment 1451107

Re: My 52 GMC Build
 

Back in the shop, I put the truck on the floor. I made up the K frame tubes and rear 45* supports. The left 45* support is different because the trans cooler is going there. I used 2X4X1/8" tube, frame is 2X5X3/16".
Attachment 1451111

Attachment 1451112

Re: My 52 GMC Build
 

Looking awesome! Must be exciting to be getting ready to put it together one final time.
Posted via Mobile Device

Re: My 52 GMC Build
 

Put it together, take it apart, put it together ....folks don't realize how much work goes into a nice build. Good progress!

Re: My 52 GMC Build
 

super dope

Re: My 52 GMC Build
 

Not much to show with pictures today. I finished welding up the inside of the frame now that the cab is off. Also welded the exhaust tip completely on, tabs to hold exhaust to frame and primed frame. Plumed in the temp gauge sensor for the trans and fittings for trans cooler. Should be lots tomorrow!!

Re: My 52 GMC Build
 

Today I painted the new frame pieces and running board frame. I also finished up the exhaust. Welded in an EGT bung, put the turbo gasket in and sealed up the cup flanges. Then as I put it all together I put wrap on the exhaust. The wrap I used is rated at 1400*. (Note) this is very itchy stuff the insides of my fingers itch like hell. Wear rubber gloves.
Attachment 1451615

Attachment 1451616

Attachment 1451617

Attachment 1451618

Attachment 1451619

Re: My 52 GMC Build
 

Today I got the transmission cooler mounted and plumed in. Then I got the fuel lines and brake line bent up and fastened. This is the nickel coated line very nice to work with hardest part is getting it straight. I'm trying to get all the under cab stuff done so I can get the cab back on. Maybe tomorrow.
Attachment 1452037

Attachment 1452038

Attachment 1452039

Attachment 1452040

Attachment 1452041

Re: My 52 GMC Build
 

You are flying! Looks good. What transmission cooler is that?

Re: My 52 GMC Build
 

Thanks I get lots done when I work afternoon shift. The trans cooler is a Derale 13950. It can be used by itself and comes with a thermal couple so it just does it's own thing when needed. Also mount it anywhere.

Re: My 52 GMC Build
 

yah your rockin and be rollin soon. I luv the copper nickel line. perhaps you can get that straightner eastwood sells. aluminum line does the same thing.

Re: My 52 GMC Build
 

Thanks 99 I got the lines close to perfectly straight just took a while.
Well after spending 34 hrs working on the truck last week I got the cab back on for the last time. I mounted the air horn, ran all my power wires to the rear. I also got rid of the old steering and put the new stuff on with the drop tie rods.
Attachment 1453821

Attachment 1453822

Re: My 52 GMC Build
 

Then seam sealed the cab and gave the floor and fire wall a good coating of rubberized rocker guard. I then ran the transmission wires into the cab.
Attachment 1453823

Attachment 1453824

Attachment 1453825

Attachment 1453826

Attachment 1453827

Re: My 52 GMC Build
 

coming together, dang 34hrs a week, that's about my average monthly time I work on my trucks.

Re: My 52 GMC Build
 

Ya I went 100% on it because the cab was sitting out side. I had friday off work so that helped.

Re: My 52 GMC Build
 

man this thing is gonna be sick I like the back half set up

Re: My 52 GMC Build
 

You're getting so much finished up. Man... 34 hours a week is like working two jobs. :lol:

Nice work!

Re: My 52 GMC Build
 

Ya felt like working 2 jobs, but this one I like going to.:metal:

Re: My 52 GMC Build
 

Well I didn't think I would get out to the shop last night. I got the rear shock mounts made and installed. I used s-10 shocks. They are angled for 2 reasons. With the air bag over top of the axle it makes the rear very stiff with little pressure so I did not want the shocks to have full power. Also that's the only spot they fit lol. Jumping on the frame at ride height seems good.
Attachment 1454349

Re: My 52 GMC Build
 

I just signed up as a Premium member.

Re: My 52 GMC Build
 

Very cool. Build is looking great and you are killing it on progress. 34 hours a week is greuling.