Re: PO has me PO'd
 

What is the ancillary tube?

What do you think about the lokar shifter? I am considering ordering one for a different project I have.

Re: PO has me PO'd
 

Looking good not sure how I would wrap it either?? You will think of something I will need to hide some of the additional wires (new harness with more options I won’t be using at least for now AC ELEC FAN etc. )under my dash

Re: PO has me PO'd
 

I could be wrong but it is the metal tube that flows the hot trans fluid to the gauge

First lokar shifter I bought was the body mount system, didn't like the idea of it flexing with body roll so I changed it to the trans mount, much better, very adaptable

Re: PO has me PO'd
 

Thanks for stopping by,, I'm thinking wrapping it around a can or pipe, then welding 2 ends to it for some feet (bracket) to mount it on the trans cover

We'll see how things work out

I thought the 55 wagon was cool, then I see the Pontiac, way cooler. Hope you don't run out of garages

Re: PO has me PO'd
 

Sorta like this


https://live.staticflickr.com/65535/...2a72a816_c.jpg16847610403487878513354123953573 by [url=https://www.flickr.com/photos/198023675@N07

Re: PO has me PO'd
 

Need to add a little more dimension to the ring


https://live.staticflickr.com/65535/...0bbb914c_c.jpg16849359247067843717796662780623 by [url=https://www.flickr.com/photos/198023675@N07

Re: PO has me PO'd
 

If it is like the coolant temperature gauges, with the probe and metal tubing to the gauge- it is a capillary tube.

It might look good coiled up under the dash, behind the gauage how you have it pictured.

Are you making a new aluminum shift boot ring, or some kind of spacer?

Re: PO has me PO'd
 

You're right, it is a capillary tube, I'll blame it on a senior moment

I just have to make the ring wider to cover the hole in the trans. Cover

Re: PO has me PO'd
 

Started to work on the 1/2 top mounting


https://live.staticflickr.com/65535/...ededc497_c.jpg16858007885981027009553877446229 by [url=https://www.flickr.com/photos/198023675@N07

Re: PO has me PO'd
 

https://live.staticflickr.com/65535/...cfec3814_c.jpg16886517690527276500985582034228 by [url=https://www.flickr.com/photos/97391199@N06

Sorry for the delay, been suffering from back pain last 5 weeks

Took a page from my Bridgeport clamping system and adapted to my work table

I hate to cut sheetmetal on my lap

Inverse of convex, equalls mind numbing, 2 different plains meet at this juncture

Re: PO has me PO'd
 

For some reason, I couldn't replicate the first piece I made, I'll call it a senior moment,

Finally after days of thinking I put the part on my V block and was able to tap in the convex shape I needed

Re: PO has me PO'd
 

Well my dremel finally toke a crap

Move on to the super max

Re: PO has me PO'd
 

https://live.staticflickr.com/65535/...cfec3814_c.jpg16886517690527276500985582034228 by James Jaros, on Flickr

Re: PO has me PO'd
 

https://live.staticflickr.com/65535/...b7a82f81_c.jpg16901173670804154081425888756155 by James Jaros, on Flickr

Re: PO has me PO'd
 

https://live.staticflickr.com/65535/...ce5c6921_c.jpg[url=https://flic.kr/p/2oReWM9]16901202995828643539516325648294

Re: PO has me PO'd
 

https://live.staticflickr.com/65535/...f78f79e2_c.jpg16904674277572276429692810025501 by [url=https://www.flickr.com/photos/97391199@N06

Well, yesterday turned into an act of futility, just couldn't get the 1/4 round out, had I known this, I would have built it leaving it in

Oh well more tap,tap

Re: PO has me PO'd
 

Well that seems to be closer to what I want


https://live.staticflickr.com/65535/...0411f82a_c.jpg16904693064114964453200015310607 by [url=https://www.flickr.com/photos/97391199@N06

Just need to cut a diagonal to form better to the inner wheel well

Re: PO has me PO'd
 

Looking good, and like a lot of work, but still good.

Re: PO has me PO'd
 

Thanks Bud, if one of 2 things had happened I wouldn't be in this mess.........1 had the company taken the time to form the lower flange better...........B I had 800.00 for a shipped bed side

Did you get the power train fixed?

https://live.staticflickr.com/65535/...011b2bab_c.jpg16906356763046012728839202428304 by [url=https://www.flickr.com/photos/97391199@N06

Re: PO has me PO'd
 

Speed, pressure, and lubrication are the key ingredients to drilling this rusty metal, if the metal isn't chipping, put a stone to the bit

https://live.staticflickr.com/65535/...7ef03a9f_c.jpg16906362558223087563129609221321 by [url=https://www.flickr.com/photos/97391199@N06

Re: PO has me PO'd
 

I got my trans pulled and stripped waiting on a rebuild kit to come in.

Re: PO has me PO'd
 

Nice

Re: PO has me PO'd
 

https://live.staticflickr.com/65535/...d27083d1_c.jpg16908071937102287716804100972051 by [url=https://www.flickr.com/photos/97391199@N06

Re: PO has me PO'd
 

Sagaa of the rpro doors continues........

Crisis averted, channel bolts in over cut down channel

Brothers sells kit for 100.00 or Precision Seal sells separate seals for 28.00

https://live.staticflickr.com/65535/...61474073_c.jpg16941807728666448477401166830942 by https://live.staticflickr.com/65535/...df5d56e6_c.jpg16941820782157924922096112536285 by [url=https://www.flickr.com/photos/97391199@N06

Re: PO has me PO'd
 

New window seal came in from Precision able to buy 1 same part for both sides

Just have to cut down and install on repro door

https://live.staticflickr.com/65535/...0de1bc8c_c.jpg16947856289813652441448809876343 by [url=https://www.flickr.com/photos/97391199@N06