Re: Fall Clearance sale! ALOT of parts cheap!!!
 

do you have a dana 20 coupler to the sm465 tranny

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Hey Randy,

I have a friend looking for an oil pan for a 6 cylinder. I think any 194, 230, 250 or maybe 292 will work. He has a 1965 C-10 with a 230. Do you have anything or know where one might be.

Thanks, Dan

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

damholl, sorry none of those
decodan, Dan, sorry all I have right now is BB stuff
Thanks Randy

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Randy,

Im looking for the following if available:

1). Nice hood for a 72 Chevy C10
2). Good used condition upper and lower moldings for a 72 Chevy C10. Black lowers and chrome uppers.
3). Nice grill for a 72 Chevy C10

I would most likely drive down and get this in 2-3 weeks.

Let me know your thoughts.

-Mike

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Hi Randy,
Do you have any GMC fender eyebrows?
I just need the driver's side eyebrow mounting clips...misplaced mine...don't know if they are the same as pass side.
Thanks,
Casey

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Randy,
What would you take for a passenger side headlight assembly (need everything from the mount to the bezel, no bulb), and a 69/70 grille center support? Shipped to 40383 commercial address?

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Mike, I have a good hood. Driver quality outer grill. Sold all my trim I had
Casey, I'll look tonight
Tynee, I'll look I should have all that
Thanks Randy

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Casey, here is what I have
Tynee, I have all but the spring on headlight bucket $15 plus shipping for pair
Thanks Randy

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Hi Randy,
Those are the clips I need. I need the large clip in upper right of pic, and one of the four small clips along with one of the small squares...3 pieces total.
If you could please Pm me price with shipping to Austin, TX 78744 and your PayPal info.
Thanks,
Casey

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Couple other places to check, I'm going to pass for now. I may be back.

Thanks.

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Casey, I'll get them out to you Fri
Tynee, no problem

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

pic for RLTW375

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

pics for Alan, here is the one small separation, these are pics of the same spot

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

here is the one that one the bottom

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

one dent in corner

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

how much for the inner a/c vents and a/c control box. shipped to 08053

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

I hope Im not to late Im looking for both inner fenders for a 66 chevy longbed and both front and rear bumpers Im in indiana 46062 Thanks Jeff

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

step350, I'll get pics of what I have
SRVBLUE, Jeff, sorry no 66 stuff right now
Thanks Randy

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

thanks what would your price be?

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

pics

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Randy, I have a 72 gmc 3/4 ton 4x4 with a bent tie rod. Do you have a straight one in ok shape? I attached a picture.

Thanks, Rodney

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Rodney, all I have right now are 1/2 dana 4x4's and the ones I have are bent too, sorry. Thanks Randy

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Hi Randy,
Sorry to interupt this thread, just curious if you would have any of these parts: Here
pass side lower control arm 72 half ton
rear spring upper mount cross member half ton.
thanks,

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

Hey Mike, I have complete 5 lug front ends, I don't separate. No rear crossmembers. Thanks Randy

Re: Fall Clearance sale! ALOT of parts cheap!!!
 

I am looking for 4 good useable windshield washer nozzles. Thanks