Re: Our "What are we going to do?" 66 Suburban Build
Awesome...did I say Awesome....
|
Re: Our "What are we going to do?" 66 Suburban Build
2 Attachment(s)
Thanks Randy!
The wheels came back from MRW today...we cleaned them up and shot some silver paint on them (the light makes them look like different shades, but they're the same). You can obviously see the seams, but not too bad. I may do some more smoothing down the road and powder coat them, but I'm anxious to get the tires mounted up right now. :lol: |
Re: Our "What are we going to do?" 66 Suburban Build
Looks like they did a good job on the wheels. I'm sure you know as well as I do, how difficult it can be to get a perfectly flush fitup on a butt joint, especially with a round tube. Did they weld both inside and out?
If you don't mind me asking, how much did they charge to widen your wheels? I'd like to have a pair of 10" or 12" wide 6 hole ralleys. Just not sure if I want to mess with it myself. |
Re: Our "What are we going to do?" 66 Suburban Build
Welded on the inside only for $80/ea before shipping. :metal:
|
Re: Our "What are we going to do?" 66 Suburban Build
Wow those arms look great!!....gonna have to get me some dimple dies not over done to me. Always awesome stuff :chevy:
Posted via Mobile Device |
Re: Our "What are we going to do?" 66 Suburban Build
3 Attachment(s)
Thanks JM :metal:
Got the tires mounted up today...:cool: |
Re: Our "What are we going to do?" 66 Suburban Build
Man that Burb has some serious rake LOL...Lookin good Guys...
|
Re: Our "What are we going to do?" 66 Suburban Build
dam where are the wheelie bars and parachute lol
|
Re: Our "What are we going to do?" 66 Suburban Build
Put the jack stands on the front and it would look like a wicked launch! :lol:
|
Re: Our "What are we going to do?" 66 Suburban Build
Quote:
Quote:
Quote:
|
Re: Our "What are we going to do?" 66 Suburban Build
5 Attachment(s)
Worked on the rear this weekend. The Trak lok I had picked up ended up being 4.56 and up (not the 4.10 and down we thought). :waah: We scrambled around and were able to locate a 35 spline, 4.10 down, Power Lok (MUCH better LS) a couple hours away. We had the shop drop new clutch plates in it and picked it up Sat. :metal:
Dropped the R&P/carrier in that night and after a bit of cleaning and painting we slipped it under the burb. It couldn't fit much tighter, we have about 1/2" clearance between pretty much everything...arm to rotor, tire to spring, tire to fender, arm saddle to caliper mount...I don't know how you could fit much more tire with a stock suspension/frame!! We bolted everything in to gauge the amount of tubbing we're going to need and to work out the track arm/sway bar details. |
Re: Our "What are we going to do?" 66 Suburban Build
3 Attachment(s)
Few more pics...
|
Re: Our "What are we going to do?" 66 Suburban Build
Nice work :thumbs:
I like that look. |
Re: Our "What are we going to do?" 66 Suburban Build
Thanks Capt!
|
Re: Our "What are we going to do?" 66 Suburban Build
OMG, what a beast !!
That thing is bad !!!! |
Re: Our "What are we going to do?" 66 Suburban Build
Nice job on the install. That giri gots some meat on her know.
|
Re: Our "What are we going to do?" 66 Suburban Build
looks great ..looks like you will be trimming wheel wells
|
Re: Our "What are we going to do?" 66 Suburban Build
3 Attachment(s)
Quote:
Quote:
Quote:
We picked up some parts to make a new track arm, so had make some room so we could set the burb down and get the angle of the dangle...no going back now!!:lol::lol: |
Re: Our "What are we going to do?" 66 Suburban Build
nice job. fits good now
|
Re: Our "What are we going to do?" 66 Suburban Build
Dies are getting a workout....;)
|
Re: Our "What are we going to do?" 66 Suburban Build
3 Attachment(s)
Quote:
Quote:
Not much to add, but we did get the track arm welded up and in...also made mounts for the sway bar. Everything just fell into place...good clearance everywhere we need it. We bolted axle back in for the last time and hooked everything back up. We have to run the brake line, modify the master, and shorten the drive shaft a bit to finish this part up. :D |
Re: Our "What are we going to do?" 66 Suburban Build
Looks nice.:cool: Can't wait to see it back on the ground, & I know ya'll are excited as well!
|
Re: Our "What are we going to do?" 66 Suburban Build
Oh thats purdy!!!! :thumbs:
|
Re: Our "What are we going to do?" 66 Suburban Build
did you test drive it with the new setup?
|
Re: Our "What are we going to do?" 66 Suburban Build
Quote:
Quote:
Quote:
|
All times are GMT -4. The time now is 11:12 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com