The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 15 of 19 « First 51011121314 15 16171819
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   OR Parting out 72 Suburban C10 402 TH400 (https://67-72chevytrucks.com/vboard/showthread.php?t=516049)

rustyrexiusrodz 07-06-2014 11:36 AM
Re: Parting out 72 Suburban C10 402 TH400
 
how is the upper trim for the clam shell type can i reserve it. also i would be interested in a lower set to thanks

tll74 07-06-2014 11:38 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by Cobalt964ruf (Post 6749333)
do you have a 3rd door inner door panel?
Yes, I believe I have one on in Parchment and Olive green for a 72 only and a 71-down in blue. I assume you want it for the 71 you list in your rides. Thanks, Tom

Cobalt964ruf 07-06-2014 03:33 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Yes for a 71 plz with shipping to 73078 piedmont Oklahoma. Thank you for your time.

Cobalt964ruf 07-14-2014 09:33 PM
Re: Parting out 72 Suburban C10 402 TH400
 
I am interested in the 71 blue 3rd door, door panel. Also need passenger side rear ambulance door upper catch bar. The bar/mechanism that limits the door from opening too far. Zip code 73078 for shipping quote purpose. Thank you for your time, mike in Oklahoma.

toyplumbertrucks 07-30-2014 09:18 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Any chance you still got the 72 2wd spindles ( for disc brakes)? I am also looking for a set of fronts springs for a big block truck and a set of 5 lug inner axle's only a 72 . shipping to 46373. Thanks.

tll74 07-31-2014 01:53 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by Cobalt964ruf (Post 6761123)
I am interested in the 71 blue 3rd door, door panel. Also need passenger side rear ambulance door upper catch bar. The bar/mechanism that limits the door from opening too far. Zip code 73078 for shipping quote purpose. Thank you for your time, mike in Oklahoma.
Sorry for the long delay. I don't have either one at this time.
Quote:
Originally Posted by toyplumbertrucks (Post 6782413)
Any chance you still got the 72 2wd spindles ( for disc brakes)? I am also looking for a set of fronts springs for a big block truck and a set of 5 lug inner axle's only a 72 . shipping to 46373. Thanks.
I do have the spindles. Theses are not your common C10 spindles though. This truck had C20 type ball joints so the holes are bigger than the common C10's. I think it is a 402 sub thing. They would work perfect for a C20 to C10 5 lug conversion.

Thanks, Tom

truckdude239 08-04-2014 04:41 PM
Re: Parting out 72 Suburban C10 402 TH400
 
do you have any good wiper motors?

yote1234 08-04-2014 04:47 PM
Re: Parting out 72 Suburban C10 402 TH400
 
do you by chance have the th400 dipstick and tube? thx dave

tll74 08-09-2014 01:21 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by truckdude239 (Post 6788378)
do you have any good wiper motors?
Sure, 25.00 shipped
Quote:
Originally Posted by yote1234 (Post 6788386)
do you by chance have the th400 dipstick and tube? thx dave
Yes, 20.00 plus 10.00 shipping


Thanks, Tom

yote1234 08-09-2014 01:47 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by tll74 (Post 6794976)
Sure, 25.00 shipped

Yes, 20.00 plus 10.00 shipping


Thanks, Tom
sorry just found a nos one. thx for reply. dave

deuceswildpacefl 08-10-2014 11:15 AM
Re: Parting out 72 Suburban C10 402 TH400
 
I saw the fuel tank straps what about the tank I am looking for one, also need a set of bb brackets and pullies for AC, alt, and ps short water pump

deuceswildpacefl 08-10-2014 11:19 AM
Re: Parting out 72 Suburban C10 402 TH400
 
looking for right corner of cowl around the blower motor if you scrapping one

tll74 08-10-2014 12:12 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by yote1234 (Post 6795001)
sorry just found a nos one. thx for reply. dave
Nice...You can't beat NOS.
Quote:
Originally Posted by deuceswildpacefl (Post 6796031)
I saw the fuel tank straps what about the tank I am looking for one, also need a set of bb brackets and pullies for AC, alt, and ps short water pump
I do have a tank 75.00 plus shipping. AC bracket kit 250.00, 72 only ALT brackets 75.00, PS pump assy with brackets/remote res. complete 150.00, 2 groove crank pulley 20.00, PS crank pulley 17.00 all plus shipping. It would be 2 weeks before I could pull all of it. I would have the cut but it would quite a while before I get to parting any more trucks that would have a good one.

Thanks, Tom

deuceswildpacefl 08-10-2014 01:16 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by tll74 (Post 6796100)
Nice...You can't beat NOS.

I do have a tank 75.00 plus shipping. AC bracket kit 250.00, 72 only ALT brackets 75.00, PS pump assy with brackets/remote res. complete 150.00, 2 groove crank pulley 20.00, PS crank pulley 17.00 all plus shipping. It would be 2 weeks before I could pull all of it. I would have the cut but it would quite a while before I get to parting any more trucks that would have a good one.

Thanks, Tom
how much with the shipping to 32571 on the tank I will pass on the brackets and pullies and I can wait on the cowl corner there is no hurry, so it would be when you can get to it, how much

truckdude239 08-10-2014 01:21 PM
Re: Parting out 72 Suburban C10 402 TH400
 
do you do paypal? if i cover the fees?

deuceswildpacefl 08-11-2014 06:21 AM
Re: Parting out 72 Suburban C10 402 TH400
 
yes on paypal

tll74 08-12-2014 01:13 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by deuceswildpacefl (Post 6796178)
how much with the shipping to 32571 on the tank I will pass on the brackets and pullies and I can wait on the cowl corner there is no hurry, so it would be when you can get to it, how much
I'll check on the shipping cost. It would be sometime in september before I get a chance to parting again. 25.00 plus shipping for the cut.
Quote:
Originally Posted by truckdude239 (Post 6796186)
do you do paypal? if i cover the fees?
Yes and yes.

Thanks, Tom

deuceswildpacefl 08-12-2014 06:07 AM
Re: Parting out 72 Suburban C10 402 TH400
 
no hurry on the cut I still need to get a pic to show what I need

deuceswildpacefl 08-17-2014 11:03 AM
Re: Parting out 72 Suburban C10 402 TH400
 
I haven't gotten a message from you on how much I owe you for the gas tank shipped to 32571 and how to pay you for it bob

walkintall54 08-18-2014 12:24 AM
Re: Parting out 72 Suburban C10 402 TH400
 
what condition is the outer grill?

1970greenburb 08-19-2014 06:15 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Hello has anyone bought the hatch dont need any hardware. Also the upper trim, (all of it).

Thanks

tll74 08-22-2014 01:52 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Just back from a another vacation since Wednesday last week.

Quote:
Originally Posted by deuceswildpacefl (Post 6805045)
I haven't gotten a message from you on how much I owe you for the gas tank shipped to 32571 and how to pay you for it bob
Damn..I got the shipping cost and forgot to post it. Now I forget what it was. I get it for you again.
Quote:
Originally Posted by walkintall54 (Post 6806135)
what condition is the outer grill?
JUNK and scrapped
Quote:
Originally Posted by 1970greenburb (Post 6808545)
Hello has anyone bought the hatch dont need any hardware. Also the upper trim, (all of it).
.
Thanks
The hatch was junk and scrapped. I do have the complete upper trim on another truck I'll be parting this fall.

Thanks, Tom

truckdude239 08-22-2014 02:33 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Sorry missed the reply can u pm me paypal for the wiper mototr

deuceswildpacefl 08-22-2014 05:39 AM
Re: Parting out 72 Suburban C10 402 TH400
 
its ok just didn't want you to think I wasn't taking it

tll74 08-23-2014 02:25 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by truckdude239 (Post 6811729)
Sorry missed the reply can u pm me paypal for the wiper mototr
PM sent
Quote:
Originally Posted by deuceswildpacefl (Post 6811764)
its ok just didn't want you to think I wasn't taking it
Shipping is 62.00

Thanks, Tom


All times are GMT -4. The time now is 06:45 PM.
Page 15 of 19 « First 51011121314 15 16171819
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com