![]() |
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
:ito:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
doors in primer going let it cure for 24 hours . did some some say football on
T V ?? food ball means :exit::barn::alc: with friends |
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
coup;e of shots of the door and front panel did a little sanding on
not much this week |
Re: 1965 chevy truck one piece @a time
looking really good.
|
Re: 1965 chevy truck one piece @a time
2 Attachment(s)
Its been a while since my last post just been buzy and not able to play on the truck and when i finally got to today it was 36 deg out side ..
any way was able to spend time on the seat base on the passanger side had a little miss hap with a primer can while mixing and spatered primer all over every thing:banghead::cuss::m6: so thus sanding the seat base .. Too get them ready for paint and put in the truck. the driver side will be power and the pass side will be non power still looking for a center console ..:chevy:Attachment 1341351 Attachment 1341353 |
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
:chevy:
|
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
Your truck is looking awesome. I am most interested in the rear fenders. I am at the crossroad right now as to whether to widen the rear fenders or split the bed and widen it. I am leaning more towards the bed as it might be a little easier form me, but we'll see. I just set it on this past weekend for the first time to see how much and it looks like I am going to need about 5 inches total.
|
Re: 1965 chevy truck one piece @a time
Good progress! Double check your front caliper pin depth. I have had a compatibility issue in that area before and different pin lengths are available. From the outside shot it looks like the pins are barely inside the non-threaded side of the caliper. This could be very dangerous. Maybe you just hadn't tightened the pins yet in that shot?
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just a little update been a crazy couple of months working and fixing the plumbing and painting stuff around the house but am still messing with the truck when i can . hope to get a good weekend in on the truck if the rains don't wash us away :lol:
did a little restoring on the delux controls when vintage are so can have a/c when it gets a little hot out :devil: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
more pics:metal:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
:metal:
|
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
last of the painted pics :smoke:
|
Re: 1965 chevy truck one piece @a time
2 Attachment(s)
:chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
preping the cab for re painting one more time
|
Re: 1965 chevy truck one piece @a time
:lol:
|
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
just a few pics from what been going on :mm:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just been little busy with a couple of projects hope to get it to paint in a month or so finished the fenders and nose ready for paint working on a hood haven't found a good one yet but will see :uhmk:
|
Re: 1965 chevy truck one piece @a time
Nice truck, I like the widened fenders and big meats. And that motor! :metal:
|
Re: 1965 chevy truck one piece @a time
Any updates?
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
some of you guys are asking for updates the trucks at the paint shop getting
a coat of paint will have pics of the progress did have the rear move up do too lowering the truck & front and rear sway bars put on will try to keep a little better time updating ..:chevy: |
Re: 1965 chevy truck one piece @a time
Looking good!
|
Re: 1965 chevy truck one piece @a time
2 Attachment(s)
couple of more from when dropping it off to paint :chevy::metal::uhmk:
and yes that is a racing milk crate |
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
:uhmk::chevy::lol:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Ok its been a while the truck was brought home from the painter after 7 1/2 months with out being touched so i brought it home.:banghead:
so ive started stripping the inside of the hood and getting it all ready to prime black and then ill paint the in side. unless i find a painter that can get the hole truck done in 4 months im going to hot rod it black and get it ready to drive in the spring :chevy: the doors and fender and the nose are ready for final sand for sealing and paint so will see what will happen . |
Re: 1965 chevy truck one piece @a time
Ouch, 7 1/2 months being held in paint jail.
Glad you got it back. |
All times are GMT -4. The time now is 10:13 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com