Re: 69 GMC "Ol' Blue"
Far closer to perfect than what mine will be. I'll be tackling that in a week or two, as well.
|
Re: 69 GMC "Ol' Blue"
Thanks guys! I'm pretty happy about how they turned out. Now I just need to figure out what I'm going to do next.
Posted via Mobile Device |
Re: 69 GMC "Ol' Blue"
Looks really good MJ! :metal:
|
Re: 69 GMC "Ol' Blue"
very nice progress!
|
Re: 69 GMC "Ol' Blue"
Thanks Brett and Mike!
|
Re: 69 GMC "Ol' Blue"
4 Attachment(s)
Last night I got one of the shock mounts tacked in. Of course this was after I was in a panic because I thought the shocks were too short. Turns out I just so happened to grab the boxes for the front instead of the rear :lol:
Here's the temporary fixture I made to hold the tab at the right angle Attachment 1099225 Attachment 1099226 All tacked in! Attachment 1099227 Attachment 1099228 Today, I need to finish grinding off the old mount on the driver's side (which I swear the po used an entire case of welding rods on). Then I should be able to tack the driver's side. From there, I think my next course of action will be to disassemble the frame for the top coat of chassis black. I will also use that opportunity to get the axles all cleaned up and painted. |
Re: 69 GMC "Ol' Blue"
3 Attachment(s)
I was able to grind all the gob welds off the old shock mount and tack the new one on. I think all frame mods are done, so it's now time to tear her down again so I can paint the frame!
Attachment 1099307 Attachment 1099308 Attachment 1099309 If anyone sees anything wrong with this setup, please chime in before it's too late :-) Posted via Mobile Device Posted via Mobile Device |
Re: 69 GMC "Ol' Blue"
3 Attachment(s)
Last night I ran across a post by see ten that had a trick using a socket over the studs on the steering arm to "shock" the cone washers out so that you can get the arm off the knuckle. I honestly thought it was BS but I just had to try it. Guess what!?! It worked like a champ!!!! I had it off in about 10 minutes (after hours of heating and banging and cussing prior to that). Of course I destroyed my 1-1/8 deep Mac socket, but you know what that was a sacrifice I was willing to make. :lol:
Attachment 1101860 Attachment 1101861 Attachment 1101862 |
Re: 69 GMC "Ol' Blue"
Looking really good Mike! Should go back together pretty fast once you finish painting the frame.
|
Re: 69 GMC "Ol' Blue"
So what did you do with the socket? I've got a 4x4 now, too, and may need to do that at some point.
|
Re: 69 GMC "Ol' Blue"
Came over to check out your build. Very nice man!
|
Re: 69 GMC "Ol' Blue"
Quote:
Quote:
Quote:
|
Re: 69 GMC "Ol' Blue"
Is the frame painted yet? At least disassembled?:lol:
|
Re: 69 GMC "Ol' Blue"
I was more asking about the trick you talked about doing with the socket, not so much about what you are doing with the socket now that its toast...
|
Re: 69 GMC "Ol' Blue"
1 Attachment(s)
Quote:
Quote:
Attachment 1103000 |
Re: 69 GMC "Ol' Blue"
1 Attachment(s)
Well, the frame is all torn down. Should be able to paint the frame this weekend.
Attachment 1103607 |
Re: 69 GMC "Ol' Blue"
Dang! That was fast. I was only kidding in my last post:lol:
|
Re: 69 GMC "Ol' Blue"
:lol: Well it's time for me to stop screwing around
|
Re: 69 GMC "Ol' Blue"
Quote:
|
Re: 69 GMC "Ol' Blue"
Quote:
|
Re: 69 GMC "Ol' Blue"
Well, progress is being made, just not on Mustard. I've been getting Blue Bell (the 87 K20) up to snuff. I ended up replacing a stretch of brake line, and I gotta say that your's looks much better than the hodge podge job I did. I think I'll be getting a better bender (like yours) when I do Mustard. The one I have just can't bend a tight enough radius to look decent.
|
Re: 69 GMC "Ol' Blue"
Quote:
|
Re: 69 GMC "Ol' Blue"
Frame painted and chassis reassembled yet? No pressure at all here, but you've had a couple of weeks now:lol:
|
Re: 69 GMC "Ol' Blue"
:lol: I haven't had a chance to work on the truck. I've spent the last few weekends trying to get our motorhome ready for Memorial weekend, then camping, and now next weekend I have to go to SK, Canada for work. So hopefully the weekend after I'll get something done. I should get out there and work on tearing my front axle down, but the motivation fairy hasn't spent a lot of time around here :lol:
Thanks for checking in though...I think it helps me lure that bugger in here. ;) |
Re: 69 GMC "Ol' Blue"
3 Attachment(s)
Hottest day of the year so far here. Nothing like a light baking in the garage :devil:
Today my suspicions were confirmed. I tore the front axle apart and found a broken shaft. Damn...oh well, with the axle ripped down this far, it will be getting new seals, u joints, ball joints and a fresh coat of paint. Missing something here :lol: Attachment 1118299 Attachment 1118300 Attachment 1118301 |
All times are GMT -4. The time now is 10:27 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com