Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
Kind of hit and miss,... unless his site is not up to date. |
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
I will post prices as sonn as he gets them to me....... ok guess i was over estimating on the 18" wheels just didnt want to say 850.00 when with the lugs and chrome stems they were a lil over that so I rounded up..... that being said i have asked him to quote 18 and 20 inch grey,and also the chrome for now
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
very nice
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
I was looking at putting 20X10's on back and 18X8's on the front. Is anyone else looking at this set up? Also I was told by a local vendor that the 20X10's would not fit the back of my 86' SWB because of the 6.225" backspace - any thoughts on that - it doesn't seem like anybody is having an issue on here. I do have rear disc brakes if that would make a difference.
I would also be interested in the group buy in the grey. Thanks |
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
I was speaking for other people that might be interested. Also,... I'd want some kind of note or amended part number to know that these are the "new design". (For you guys with 1.25" rotors up front) I already cured my "wheel problem" by running the 1" rotors. |
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
(basically 1/4" less) I think they will be fine. Your only other choice, is to run a spacer. |
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
I think the thing to ask for is a group discount on any Boss wheel's that they offer. Dont try to limit it to one size or one style. I want a very fat wheel like 10" or more with little back space cause Im going ot be running a narrower rear end plus a different bolt pattern.... There will be too many people wanting different sizes. Something like a 33% discount or so if we can get like 10 sets or 20 wheels sold by then end of Jan or so... Just somethink think about or offer......
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
Thanks guys for the effort on the group discount..... |
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Hey Dirty McFast,
That is the set up i was thinking about. I have gone as far as getting quoted $683.82 w/ "Free Delivery" Id say lets talk to this guy about a group buy?? do you have a photo shop rendering of what they would look like? |
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
love my 72 sounds good why dont several of us check around with vendors and see what we can come up with.....
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
For this to work we should all get a quote for the same wheel with different vendors for 1 set and then ask about a bulk purchase, but with different finish back space, etc.etc.etc the price i was quoted was for 18x8 and 20X10 all with a 5X5 bolt patern |
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
I could actually facilitate this, as I have my resale license in auto parts & accessories. And I use to work for AEW ;). But, the new design is still not readily available, so I don't want to promise much as of now.
Ed |
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
If I you are wanting to purchase these wheels,... I would wait. |
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
I spoke with the factory today the new design is ready and most all of the wheels are ready to ship from factory.... this the the third revision in the design on these wheels...... I was told bs did not change...... I am ready to order and will be doing so tomorrow...... I will let you know how it shakes down.
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
looking back to the very beginning of the thread i have been in contact with my vendor. i am a wheel/tire/suspension vendor as well and speaking to my contact and his manager he is still not 100% POSITIVE that they have been fixed... he as well has a early model c10 and is one of the first in line to get the new style. (i have seen his truck) he's not just trying to sell me on them. he hasn't pulled the trigger on them because they are not fixed. he is emailing me tomm. with updates from his manger so we will see but i was told beginning of january MAYBE!
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
ok guys here is the quote for the vendor i am working with on the wheels.....
"As of right now, we do have all sizes and finishes available in your fitment. Just let me know what you can put together (even if the sizes and finishes are a bit different), and we'll work the price down significantly for you." I am ordering mine today |
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Wow! I just called and talked to the Manager of the local American Eagle Wheel Warehouse and he said that they are just starting to trickle out and all that is available at this time is chrome. Who does your guy know? :)
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Can anyone verify the BS available? I am interested in 20X8.5 and 20X10 in chrome with 5-5.5bs depending on what's available...
|
All times are GMT -4. The time now is 01:28 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com