![]() |
Re: My 86 build
It's a steering shaft isn't it?
|
Re: My 86 build
Quote:
|
Re: My 86 build
All the fab work looks good !
|
Re: My 86 build
Quote:
|
Re: My 86 build
2 Attachment(s)
notch & crossmember done....ended up going with my original crossmember, alot stronger and already made...now on to link bars and mounting tabs!
|
Re: My 86 build
2 Attachment(s)
..
|
Re: My 86 build
nice
|
Re: My 86 build
Quote:
|
Re: My 86 build
may switch up my upper bars and go with a wishbone style instead of triangulated uppers...not sure if I can get them mounted the way I want them and still get enough triangulation.
|
Re: My 86 build
5 Attachment(s)
after a coulple hours of grinding!....12, 4" link tabs, just need to drill them now!
|
Re: My 86 build
Nice work!!!!
|
Re: My 86 build
Quote:
|
Re: My 86 build
hopefully get off work early tomorrow and get some shyte done!
|
Re: My 86 build
looks really good ...supposed to be sunny tommorrow but 5C
|
Re: My 86 build
got some of my tabs drilled today, mocked up upper link bars and going to go with a wishbone set up now. with any luck I should have the rear bagged tomorrow aft.
|
Re: My 86 build
5 Attachment(s)
wishbone mock up
|
Re: My 86 build
1 Attachment(s)
one more...
|
Re: My 86 build
5 Attachment(s)
crappy day today :(....so I cut the tubes down to make the wishbone, and welded it up, welded the tabs to the axle. still have to weld in the front wishbone mount, but I want to wait till I'm done with the lowers first.....so close now :)
|
Re: My 86 build
I like tha look of a wishbone better than upper links..
|
Re: My 86 build
thanks pops!.......the triangulated bars just weren't going to work out the way I would've like them to...
|
Re: My 86 build
....got a little bit done today...I'll post pics later.
|
Re: My 86 build
4 Attachment(s)
today I started to raise the fenders in the bed to make some room in the wheelwells, I cant drop it any lower without the tires wanting to hit the fenders, so I thought I'd get this out of the way before I finish the 4-link bars. I only got the drivers side finished today, I hope to do the passengers side this week. forgot to take pics during the cutting and welding, but have some after....
|
Re: My 86 build
4 Attachment(s)
I managed to get the pass side rear fender raised tonight after work....took some more pics....
|
Re: My 86 build
5 Attachment(s)
and....
|
Re: My 86 build
1 Attachment(s)
I also found out today that my battery box is in...need to go pick it up!
|
All times are GMT -4. The time now is 04:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com