The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   you want parts!!!!! (https://67-72chevytrucks.com/vboard/showthread.php?t=268110)

teeitup 02-10-2010 06:54 PM

Re: you want parts!!!!!
 
Sorry no good ones. Thanks Randy

harrdawg54 02-10-2010 08:18 PM

Re: you want parts!!!!!
 
Wondering if you have any of the AC controllers still...broken is fine. What I really need is the bracket on the bottom of the controller that mounts it to the dash.

teeitup 02-10-2010 09:12 PM

Re: you want parts!!!!!
 
I think I have some still out there, I'll look Thurs after work. Thanks Randy

Hottrucks 02-11-2010 08:09 AM

Re: you want parts!!!!!
 
hey Randy my jumks apaet and I'm workin gon it again.... I need just a boster and a cowl flap ...shipped to 03748..and maybe a set of black arm rests

thanx
Jeff

teeitup 02-11-2010 01:23 PM

Re: you want parts!!!!!
 
Jeff, you needing a complete booster setup? I'm not sure what your wanting on cowl flaps, the AC flap? Thanks Randy

teeitup 02-11-2010 07:22 PM

Re: you want parts!!!!!
 
2 Attachment(s)
harrdawg, I have this one for $23 shipped, has a broken arm
Other pics is for Harold
Thanks Randy

harrdawg54 02-11-2010 07:47 PM

Re: you want parts!!!!!
 
Done....$23 shipped to 83815. How do you want your payment, PP, MO, or.....

Hottrucks 02-11-2010 10:23 PM

Re: you want parts!!!!!
 
Quote:

Originally Posted by teeitup (Post 3794447)
Jeff, you needing a complete booster setup? I'm not sure what your wanting on cowl flaps, the AC flap? Thanks Randy

I need JUST the booster.....the flap I'm looking for is the cowl vent flap....I'm not sure if my vacum acuators are any good some if you have those let me know...about one of those

FRENCHBLUE72 02-12-2010 10:02 AM

Re: you want parts!!!!!
 
Randy I have been looking for the clevis pins and clips that hold the brake booster rods together just out side the firewall do you happen to have a pair with the clips?

krsowles 02-12-2010 11:52 AM

Re: you want parts!!!!!
 
hi, looking for a caliper holddown (drivers side) for a 72 chevy k10 4wd. would love any help, thanks kelly

chevroletman223 02-12-2010 05:23 PM

Re: you want parts!!!!!
 
Randy, any chance you have a front shaft of a two piece driveshaft setup for a 68 c10 shortbox with a th350? I really need one. if so, how much shipped to 13438? Thanks, Dan. if your not sure if one will work just give me the measurements and ill see if it'll fit.

IndyRich 02-13-2010 04:00 AM

Re: you want parts!!!!!
 
So do you have any headliner trim..it can be rough as long as it is not broken?......also looking for good shape radio knobs (just the knobs themselves, not the bowls) thank you for your time Rich

teeitup 02-13-2010 09:58 AM

Re: you want parts!!!!!
 
harrdawg, shipped it out yesterday, Thanks
Hottrucks, I have 71-72 disc brakes booster setups for $40 plus shipping. I think I have some AC cowl flaps. I'll look this afternoon
Frenchblue, all I have are the ones with the complete setups, sorry I don't want to separate
krsowles, I have complete frontends but sorry I don't separate them
chevroletman, Dan, no driveshafts right now
Indyrich, I have some out there but most are broken, I'll check later today
Thanks Randy

Hottrucks 02-13-2010 11:17 AM

Re: you want parts!!!!!
 
thanx

teeitup 02-14-2010 02:05 PM

Re: you want parts!!!!!
 
5 Attachment(s)
pics for you all
booster 71-72 disc brake, AC flap has one chip out of it

teeitup 02-14-2010 02:06 PM

Re: you want parts!!!!!
 
4 Attachment(s)
headliner trim is worn, 2 of them have small crack in corner by screw hole, most the clips are broke off the back

IndyRich 02-14-2010 09:31 PM

Re: you want parts!!!!!
 
Well, it is rough, but maybe I could work some magic on the trim. Give me a deal shipped to 46037 and I'll try it.

teeitup 02-15-2010 12:21 AM

Re: you want parts!!!!!
 
$15 plus shipping, I won't be able to get a shipping price till Tues, I'm gone all day Mon. Thanks Randy

IndyRich 02-15-2010 12:44 AM

Re: you want parts!!!!!
 
Randy,
That sounds good to me, just let me know when you get the shipping cost and I'll PM you my address....You do Paypal right?

Mike J 02-15-2010 12:06 PM

Re: you want parts!!!!!
 
I need the trackbar bracket that bolts/rivets to the frame- had to damage mine to get the old track bar off- do you think you have one? thanks!!! let me know a price and shipping to 40216

Hottrucks 02-15-2010 05:19 PM

Re: you want parts!!!!!
 
ok Randy just the booster ( someone else could use the peddle ass I'm sure) the flap and a vacum acuator to 03748..and PM me your addy I'll get a check off to you I don't have any other way

thanx
Jeff

tumbleweed68 02-16-2010 12:45 AM

Re: you want parts!!!!!
 
Randy, i was reading thru some of these messages and have answered my own question about the sway bar. I am interested if the shipping isn't gonna kill me. shoot me a ball park to 50056 and we might be able to do some business. Btw, Hats of to you and the things you do for all us with these cool rides!!!

teeitup 02-16-2010 09:16 AM

Re: you want parts!!!!!
 
Indyrich, I'll get a quote later today
Mike J, sorry none right now
Hottrucks, Jeff, $25 plus shipping for that stuff
tumbleweed68, $60 shipped, I'll get a pic of the one I do have left. THANKS for the kind words
Randy

48richard 02-16-2010 10:01 AM

Re: you want parts!!!!!
 
I need an A/C evaporator box and blower. How much shipped to 85048 (Phoenix)?

Hottrucks 02-16-2010 02:59 PM

Re: you want parts!!!!!
 
thanx Randy...PM sent

I need a set of rad top supports to let me know with and without


All times are GMT -4. The time now is 03:13 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com