The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today? Chapter II (https://67-72chevytrucks.com/vboard/showthread.php?t=612422)

blf 09-08-2016 11:08 AM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by 1968aj (Post 7707141)
I think if you had a seal leaking it would be more concentrated around the axle

Hmm -- it smelled sulfurous in there, like gear oil. What are the other explanations? I know the brakes need work back there so it could be a leaky wheel cylinder but it sure seems more like grease or gear oil. My theory is it's leaking down and getting churned up by the brakes. (The shoes and drum were all greasy)

crazyjeenyus 09-08-2016 03:00 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by SoCoC10 (Post 7666525)
Installed some CPP lowering springs. Here is the after...


Nice truck, is it a stock GM color? What is the color name/code?

Dad's72 09-08-2016 03:15 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by RodnRudy (Post 7706505)
Spent the weekend digging out hedge stumps from around the house so today I and the wife took the 68 to the nursery and loaded up new bushes to plant.
She's now officially a "work" truck!

Good looking truck. What is the drop on your truck?

BugzC10 09-08-2016 05:39 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Installed new battery and red hot wire from starter to relay

webfoot 09-08-2016 07:26 PM

Re: What did you do to your truck today? Chapter II
 
Today I continued to wait for my new turn signal switch to get here.

RodnRudy 09-08-2016 07:41 PM

Re: What did you do to your truck today? Chapter II
 
Quick answer for Dads72, Truck has 5 1/2", 7" drop on 15" rallys

74baggedbug 09-08-2016 11:01 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by firedemon (Post 7706675)
I like the looks of that better than the one lmc sells . the one lmc sells works in that it keeps everything out , but I think the holes are too small seems like the vents don't throw enough air now


What construction adhesive did you use? Thanks

San Diego Ron 09-10-2016 08:06 PM

Re: What did you do to your truck today? Chapter II
 
5 Attachment(s)
Well, today I taped and sprayed epoxy primer/sealer.

68 Stepper 09-10-2016 10:45 PM

Re: What did you do to your truck today? Chapter II
 
[That is a good buddy!

Great loking emblems.

QUOTE=74baggedbug;7704909]http://i1183.photobucket.com/albums/...D3C67317EF.jpg

Buddy made these for me to take the place of the factory c/10 on the fenders[/QUOTE]

In The Ten Ring 09-11-2016 12:06 AM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by 68 Stepper (Post 7709379)
[That is a good buddy!

Great loking emblems.

QUOTE=74baggedbug;7704909]http://i1183.photobucket.com/albums/...D3C67317EF.jpg

Buddy made these for me to take the place of the factory c/10 on the fenders

[/QUOTE]

God blessed Texas!

cruisinthe34 09-11-2016 04:24 AM

Re: What did you do to your truck today? Chapter II
 
Started on the 6" static rear drop.

http://wvstreetrods.com/Wow/images/RearLowerShock.jpg

cruisinthe34 09-11-2016 04:24 AM

Re: What did you do to your truck today? Chapter II
 
Started on the 6" static rear drop.

http://wvstreetrods.com/Wow/images/RearLowerShock.jpg

Possmguts 09-11-2016 02:16 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Went for a little imaginary cruise today... She ran like a champ and I smoked a couple mustangs and a few ricers...

88fordf150 09-11-2016 05:50 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by Possmguts (Post 7709818)
Went for a little imaginary cruise today... She ran like a champ and I smoked a couple mustangs and a few ricers...

Yep! I do the same thing. lol

1968aj 09-11-2016 09:34 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Did some cleaning on the trucks. took them for a short ride one at a time of course. its a long story how I ended up with 3 69 models and really wanted a 68.

everettelane 09-11-2016 10:02 PM

Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
Built a new trans cross member for my six speed made it so i could run exhaust under it also cut out the rear cross member and welded in plate to run exhaust through it.Pay no attention to the (temporary) fuel lines i had to do that to move the truck, i plan on going stainless tubing.

RodnRudy 09-12-2016 07:21 PM

Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
Yesterday I reinstalled the tail light trim that came with the truck, not 68 correct but I like it and it's cheap like me. Today I reinstalled the door sill plates and hauled the rider to the daughters and mowed her grass. This old girl hauls!

Dad's72 09-12-2016 07:28 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by cruisinthe34 (Post 7709513)
Started on the 6" static rear drop.

http://wvstreetrods.com/Wow/images/RearLowerShock.jpg

How did that install go? Do tell. What drop did you buy? ECE?

crazyjeenyus 09-12-2016 11:38 PM

1 Attachment(s)
Broke in the cam on the new engine with my newly built run-stand.

VWNate1 09-13-2016 12:50 PM

Re: What did you do to your truck today? Chapter II
 
RE : cam breakin ~ what RPM's and how long did you run it ? .

66clow 09-13-2016 02:21 PM

Re: What did you do to your truck today? Chapter II
 
I didn't let living in a an apartment keep me from doing a little bodywork :clap: also tested out some temporary rattle can colors. May go with the satin blue on the bottom and plastidip the top satin black or just rattle can all of it.

http://i1262.photobucket.com/albums/...psbfffrbg7.jpg

http://i1262.photobucket.com/albums/...ps1ugn4wzw.jpg

http://i1262.photobucket.com/albums/...ps3ebbwvgq.jpg

http://i1262.photobucket.com/albums/...psaytuxdbn.jpg
http://i1262.photobucket.com/albums/...psr5wc6mgw.jpg

San Diego Ron 09-13-2016 05:55 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Nice truck, I wouldn't raddle can it, Maaco quoted me price of $900 with body work or $300 less without door jams. Want to two-tone mine so going it alone with paint from (Paint For Cars. com) Toms River, N.J. ...$75/$85 per gallon kit with everything. By the way mine is going to be silver on top with Midnight Blue on bottom...about like your color.

crazyjeenyus 09-13-2016 06:23 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by VWNate1 (Post 7711574)
RE : cam breakin ~ what RPM's and how long did you run it ? .

I ran it at 2500 for 17min. then i varied between 2000 and 3000 for 5 or so min.

383
flat tops
xe274h
Holley Classic 600cfm

colgad 09-13-2016 06:51 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by everettelane (Post 7710182)
Built a new trans cross member for my six speed made it so i could run exhaust under it also cut out the rear cross member and welded in plate to run exhaust through it.Pay no attention to the (temporary) fuel lines i had to do that to move the truck, i plan on going stainless tubing.

Can we get a photo of the shifter location in the cab? And what shifter location did you use on the trans? Is this the T56 Magnum 6 speed?

Really nice job on the trans mount by the way!

Thanks!!!

In The Ten Ring 09-13-2016 07:15 PM

Re: What did you do to your truck today? Chapter II
 
I wished I had it back together and running. Does that count? :lol:


All times are GMT -4. The time now is 01:16 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com