Re: Project Reno - 72 cheyenne rebuild
The starter cover you have looks like the one that came with my 4.8/4L60. do you have the one that came with your motor?
|
Re: Project Reno - 72 cheyenne rebuild
Motor came with no trans. I only have the stock plates that came with both bell housings I had for the 350.
|
Re: Project Reno - 72 cheyenne rebuild
Actually both one templates you have look real close to the originals I can take a picture when I go to my shop if you want. get a part number maybe?
|
Re: Project Reno - 72 cheyenne rebuild
Well that would be great. Save me some time definitely.
Thanks |
Re: Project Reno - 72 cheyenne rebuild
That explains it all LS and SM465
|
Re: Project Reno - 72 cheyenne rebuild
Sorry man but I had to work both days this weekend so I didn't get to the shop. I will try tomorrow.
|
Re: Project Reno - 72 cheyenne rebuild
No worries. I am slammed with work as well so won't be fabricating anything for a couple weeks.
I appreciate the favor. Chris |
Re: Project Reno - 72 cheyenne rebuild
Quote:
is out there on the inter web as well so will either buy a new one or rebuild with high end parts. The main issue is I will have to do the driveshafts again and deal with a host of other mods that you're all to familiar with. For now though, this setup is pretty nice and will work. Chris |
Re: Project Reno - 72 cheyenne rebuild
Ya it's hard to beat SM465 they have done a great job designing it and it's proven it's self over and aver again. I still have mine and 205.
|
Re: Project Reno - 72 cheyenne rebuild
Howdy all. Well in my quest to find someone that could do REAL wood dash pieces, I found this guy in Texas. Very nice, semi-retired and based on conversation with him he seems like a good guy to deal with. For those of you that might want to go the real wood route on your cheyenne's, here is a link to the product he is making. Every dash is custom made to your specifications. The company name is Wabbit's wood works and here's a link:
http://www.hotrodhotline.com/pr/2009/09wabbitsmay2/ I have not decided if I am going to go this route based on the types of wood he uses, but will update this if I indeed use him. Hope this helps someone... out there... searching... and searching....and searching... :) |
Re: Project Reno - 72 cheyenne rebuild
Nice look'n wood work. I bet they cost a few bucks
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
http://images2.snapfish.com/23232323...%3C25%3Aot1lsi This is heavily figured curly maple. It looks almost pearl. I am going with an amber stain to match interior accents. Gonna plane it down to about a 1/4 inch and the rest will be by hand. I will do this step by step and take my time. Will be nice to do something that isn't metal for a change. If all goes well, the finished piece should be coated with glossy UV resistant crystal clear bar top epoxy resin and adhered with 3m trim tape. On another front, my last round of jobs is almost wrapped up so will be able to get the truck finished up in July. I insured her yesterday so no turning back now. Cheers __________________ |
Re: Project Reno - 72 cheyenne rebuild
If the material is 3/4" thick re-saw it so you end up with 2 pieces 3/8" thick and plane them down to 1/4" double you material. if you don't have a band saw to re-saw you can have a lumber yard do it for you. I made a water ski that way back in high school skied on it for almost 15 years.
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
Today I was able to get the dust shield for the bell housing done and installed. Turned out pretty good I guess. They'll stop dust anyway. http://images1.snapfish.com/23232323...4f%3Ae66ot1lsi The drivers side also serves as a spring point for the second clutch fork spring http://images2.snapfish.com/23232323...%3A25%3Aot1lsi Passengers side was a little more work and had to weld tangs on the upper right to keep it from pushing into the flywheel. http://images1.snapfish.com/23232323...%3C5%3Bgot1lsi |
Re: Project Reno - 72 cheyenne rebuild
Can you tell me more about the "Push to Start" button? I'd love that.
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
It was an afterthought and had I known the required hole in the dash was much smaller then what exists in that location for stock ignition, I could have welded the hole up. They were eager to help and had a larger button, but it too was too small for the hole. I returned the system and was bummed not to be able to use it. Instead I used the neutral safety switch wired into a toggle switch under the dash somewhere to shut off the ignition in an effort to add a theft deterrent feature. I have also heard of people that hide a push button switch into and behind the lighter. Pretty cool. Anyway, check out the website if interested. The whole advanced keys system is slick. It enables the ignition as you approach the car. Has the ability to unlock doors, start the car etc. http://www.advancedkeys.com/Prod_AK104B.html |
Re: Project Reno - 72 cheyenne rebuild
Thank you,. This might just make it into my 85 C-20 .
|
Re: Project Reno - 72 cheyenne rebuild
Wood work
Well, had a day to get some of the trim work done. A friend of a friend planed the wood down to 3/16" and that gave me a good base to fine tune the wood. I was able to template the glove box and ashtray and transfer that to the curly maple. Today I cut, shaped and sanded the wood to a thickness I liked. A few woodworkers I know recommended Watco Danish oil as the finish. http://images1.snapfish.com/23232323...79874%3Bot1lsi I did some tests and determined that a combo of two oils in several coats got me the look I wanted. http://images1.snapfish.com/23232323...h8ie6%3Aot1lsi This is the initial coat with just golden oak. As I had hoped, the grain popped right out with some color. http://images2.snapfish.com/23232323...%3A25%3Aot1lsi I next added a few coats of the light walnut. This deepened the grain and richened the color. It will match the interior accents and be slightly lighter than the truck's paint. http://images1.snapfish.com/23232323...9%3B3595ot1lsi In three days I will coat with bar top epoxy to give it a smooth glassy hard finish. |
Re: Project Reno - 72 cheyenne rebuild
Looks like a good stain combination..
|
Re: Project Reno - 72 cheyenne rebuild
Me Likey!
|
Re: Project Reno - 72 cheyenne rebuild
Very cool can't wait to see the wood installed
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
Quote:
Quote:
|
Re: Project Reno - 72 cheyenne rebuild
I got a quick question for you. As you had suggested, I ended up with the American Autowire harness. My question is how did you mount your fuse panel? Just using the two studs punching through the firewall? I really like how clean yours turned out! I found the picture, but couldn't quite tell.
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
Glad you went with AAW. Let me know if you have any other questions. |
Re: Project Reno - 72 cheyenne rebuild
Quote:
|
All times are GMT -4. The time now is 05:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com