Re: First truck project! 89 Silverado 5.7 350 V8!
yeah i did away with the y also
|
Re: First truck project! 89 Silverado 5.7 350 V8!
Quote:
|
Re: First truck project! 89 Silverado 5.7 350 V8!
The thicker the flange the better, if you don't go with 3/8' flange I would think about these http://www.summitracing.com/parts/JEX-FLX3010B/
Nothings worst than spending all that money and 6 months later you have a warped or cracked header, plus for the price they look really cool. |
Re: First truck project! 89 Silverado 5.7 350 V8!
what i did was get a collector extension kit from jegs, have them bent like the stock pipes are and voila, true duals with no y pipe. But mine dump right where the bed starts. But if you want your pipes to exit by the bumper, you have to have them side by side cause of the tank.
|
Re: First truck project! 89 Silverado 5.7 350 V8!
Quote:
|
Re: First truck project! 89 Silverado 5.7 350 V8!
no, i got these shorties http://www.summitracing.com/parts/BIG-11504FLT/
And then these and bent them how i wanted them http://www.jegs.com/i/JEGS/555/30631/10002/-1 then welded my mufflers at the end of those with turndowns, it comes out right at the beginning of the bed though. Cheaper than a muffler shop, but i do all my own stuff. |
Re: First truck project! 89 Silverado 5.7 350 V8!
Quote:
|
Re: First truck project! 89 Silverado 5.7 350 V8!
Quote:
|
Re: First truck project! 89 Silverado 5.7 350 V8!
The ones I bought from ebay instainless for $122 shipped fit directly in place of the stock manifolds and the top side is a very thick flange has to be at least 3/8 or so. The collector is thick as well and as mentioned uses no gaskets it's ball end to fit in place of the stock manifolds and bolt to stock pipes without a donut gasket. I love em.
|
Re: First truck project! 89 Silverado 5.7 350 V8!
could you look those up for us?
|
Re: First truck project! 89 Silverado 5.7 350 V8!
I already did they are in my buid thread here, called 88 buildup on a tight budget or just go search ebay for the ones I had from tuning pros or 88 chevy truck headers, it aint hard.
I did it anyways took less then a minute... http://shop.ebay.com/i.html?_trkparm...&_sop=15&_sc=1 tons there... http://cgi.ebay.com/ebaymotors/CHEVY...Q5fAccessories an auction for some just like mines.. http://cgi.ebay.com/ebaymotors/Chevy...Q5fAccessories That's the ones I bought and are now cheaper of course lol. my thread about halfway down this page is the headers and pics of them installed and such.. http://67-72chevytrucks.com/vboard/s...=376083&page=2 here's the other thread of mine with more pics including how thick they flange is and the ball end and how they discolored. http://67-72chevytrucks.com/vboard/s...=395994&page=2 |
Re: First truck project! 89 Silverado 5.7 350 V8!
Quote:
|
Re: First truck project! 89 Silverado 5.7 350 V8!
I'm very happy with them, mine had duals and I didn't have a welder fo I didn't want to cut or weld anything, as for bolting thwem on not long. About as long as it'd take to remove the 3 lower bolts and the 6 upper bolts on each side, maybe a couple hours or so if that but mine had been off recently. If the manifolds aint been off might take a little longer. I removed all my plugs so I wouldn't drop one and break a plug, and that was the biggest PITA of the whole job putting the back 2 plugs in on either side. You need an offset 5/8 or short 5/8's socket made for plugs that let's you use a wrench on, but I got by with a regular box end 5/8 it just took some time.
|
Re: First truck project! 89 Silverado 5.7 350 V8!
Well i found out that i need some rear lights and high beam lights. Im going to try and get the bed armoured and clean up the cab corenrs. There not rusty just a little surface rust. I can post pics a little later when i get it done. Im using coke and rust stoppage black paint. Any one else have a better way? Thanks
|
Re: First truck project! 89 Silverado 5.7 350 V8!
Quote:
http://i2.photobucket.com/albums/y50...a/BradyHit.jpg :haha: |
Re: First truck project! 89 Silverado 5.7 350 V8!
sand it off and use self etch primer, then wetsand it and paint it.
|
Re: First truck project! 89 Silverado 5.7 350 V8!
Quote:
|
Re: First truck project! 89 Silverado 5.7 350 V8!
Getting some new chrome valve covers!! And i put a 4" Pipe with a flowmaster on it. SOUNDS SWEET! I made a video, let me know if you want to see it.
|
Re: First truck project! 89 Silverado 5.7 350 V8!
Heck ya we want to hear it
|
Re: First truck project! 89 Silverado 5.7 350 V8!
yeah i wanna hear it.
|
Re: First truck project! 89 Silverado 5.7 350 V8!
Here ya GO!!! Ima make a video tomorrow getting it a little higher rpms. I didnt want to tick of the neighbors lol.
|
Re: First truck project! 89 Silverado 5.7 350 V8!
sounds pretty good. sounds about like mine but mines a three inch pipe with a flowmaster with duel outlets
|
Re: First truck project! 89 Silverado 5.7 350 V8!
Quote:
is your truck a 4wd? i want a set for my 4wd tahoe |
Re: First truck project! 89 Silverado 5.7 350 V8!
Got the new Flowmasta on!! http://www.youtube.com/watch?v=rSljeChOZ4c sorry that i mention scyler alot. Its one of my friends that wants to drag with me.
|
Re: First truck project! 89 Silverado 5.7 350 V8!
Well painting the rims today! I will get some before and after pics l8r! And also dropped the clutch for the first time! Heres the pics!
http://i918.photobucket.com/albums/a...A/DSCF0337.jpg http://i918.photobucket.com/albums/a...A/DSCF0336.jpg http://i918.photobucket.com/albums/a...A/DSCF0332.jpg http://i918.photobucket.com/albums/a...A/DSCF0331.jpg http://i918.photobucket.com/albums/a...A/DSCF0330.jpg http://i918.photobucket.com/albums/a...A/DSCF0328.jpg http://i918.photobucket.com/albums/a...A/DSCF0329.jpg |
All times are GMT -4. The time now is 02:53 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com