Re: It ain't over till it's over.
good looking project, it looks like you've made some good progress. Also, welcome from Nor-Cal!
|
Re: It ain't over till it's over.
Good job, welcome from Western Kentucky.
|
Re: It ain't over till it's over.
Welcome to the site from Big Sandy, West Tennessee.
|
Re: It ain't over till it's over.
2 Attachment(s)
|
Re: It ain't over till it's over.
1 Attachment(s)
We decided to pull the bed so we can paint frame and the back of the cab also made it easier to run the exhaust
http://nb-productions.com/img/0/HPIM0297.JPG http://nb-productions.com/img/0/HPIM0255.JPG new rear bumper and that didn't work out so well a visitor to the apartment complex ran in to the rear of the truck and pushed it into the car next to it Attachment 622568 http://nb-productions.com/img/0/HPIM0300.JPG we cut the bumper down to fit like and roll pan cut the front coil springs and move the rear leaf hanger bolts up for a 2/3 drop http://nb-productions.com/img/0/HPIM0261.JPG http://nb-productions.com/img/0/HPIM0267.JPG |
Re: It ain't over till it's over.
3 Attachment(s)
|
Re: It ain't over till it's over.
Welcome from MI. Nice lookin truck you've got for a budget build. Not that you'll need it now that it's running, but Summit has their own brand carb, I think something like $225 brand new for an out of the box runner. Good luck with the rest of the build:uhmk:
|
Re: It ain't over till it's over.
Welcome to the board! If y'all need assistance I'm up in HazelGreen.
|
Re: It ain't over till it's over.
Thanks Guys
Quote:
|
Re: It ain't over till it's over.
some shiny stuff
http://nb-productions.com/img/0/HPIM0304.JPG heres the bumper we recut to make the rollpan. still have a little welding to do http://nb-productions.com/img/0/HPIM0305.JPG 0ne of 3 subwoofers http://nb-productions.com/img/0/HPIM0252.JPG |
Re: It ain't over till it's over.
Taking it back down to metal
http://nb-productions.com/img/tp/HPIM0293.JPG http://nb-productions.com/img/tp/HPIM0286.JPG column we picked up for free to replace the old one http://nb-productions.com/img/tp/HPIM0250.JPG |
Re: It ain't over till it's over.
Late Welcome from Mascot TN. Lookin good!
|
Re: It ain't over till it's over.
thanks
here are the test fit of da door panels made from 2x4s. was a color change, and padding added. try to get pictures of that soon http://nb-productions.com/img/0/doorold.gif |
Re: It ain't over till it's over.
1 Attachment(s)
be4
Attachment 631072 bucket seats out of are moms 1999 Chrysler Town & Country van http://nb-productions.com/img/0/HPIM0312.JPG da shag carpet http://nb-productions.com/img/0/carpet.gif We also got the consoles put together and primed. They're outside drying. It's just too hot for me to go out there. Heat index is over 115. I'll get some pictures of those later. Tell me what you think. |
Re: It ain't over till it's over.
3 Attachment(s)
|
Re: It ain't over till it's over.
Wow, looks like fun guys, nice work and I like the bumper...keep the pics comin'
|
Re: It ain't over till it's over.
thanks. it's been fun doing it. at least on my end. my nephew doesn't think so cause i'm always on his butt about getting things done. but he's learning. and that was the sole purpose of doing this. for him to learn, so he doesn't have to rely on us old folks to do things for him. heck, when he started, he couldn't tell you a 9/16 from a 1/2. he's learned to bondo, prime, disassemble, reassemble, and any kind of semble you can think of, during this process. he sometimes gets mad at me, but then realizes what he's learning. go figure... kids.
|
Re: It ain't over till it's over.
1 Attachment(s)
Nephew's first attempt with real paint. We let him do it on an area that's not gonna show too much. I'm thinking he did pretty good. What do you think?
Attachment 620486 |
Re: It ain't over till it's over.
1 Attachment(s)
bumper we recut to make rollpan
Attachment 620733 |
Re: It ain't over till it's over.
That rollpan/bumper is slick! Best original idea I've ever seen for a rollpan.
I once primed a whole truck with spray bombs in an apartment parking lot, one panel at a time. Every couple days I'd do another panel or fender, didn't turn out half bad... |
Re: It ain't over till it's over.
Thanks
Yeah we have a compressor and everything and set up a portable paint booth up out back. Just can't do anything during the week seeing as how the city municipal inspector's office is at the end of our street and they drive by here everyday. So we just put the booth up on Friday everning and take it down Sunday afternoon. Yeah, we had to do something with the bumper to keep from losing the investment. |
Re: It ain't over till it's over.
5 Attachment(s)
Getting some primer sealer on. Getting ready to put the bed back on and paint this mofo. Gonna put some new shoes on the mofo too. Post pics then.
Attachment 623142 Attachment 623143 Attachment 623144 Attachment 623145 Attachment 623146 |
Re: It ain't over till it's over.
5 Attachment(s)
Here's our attempt to repair the dash. It came out pretty decent, but we decided to just buy a cover from LMC Truck.
Attachment 625194 Attachment 625195 Attachment 625193 Attachment 625196 Here's where my nephew was using his artistic talents. Attachment 625197 |
Re: It ain't over till it's over.
2 Attachment(s)
looking good lol its geting there got her jacked up changing differential oil, and making sure what gears I've got, which was 2.56, and that sucks.
[Attachment 626237 Attachment 626238 |
Re: It ain't over till it's over.
4 Attachment(s)
got the inside of da doors done got some trash its outside lol
Attachment 626569 :gmc2::gmc2::gmc2::gmc2: :gmc2::gmc2: :gmc2::gmc2: Attachment 626570 :gmc2::gmc2::gmc2::gmc2: :gmc2::gmc2: :gmc2::gmc2: Attachment 626571 :gmc2::gmc2::gmc2::gmc2: :gmc2::gmc2: :gmc2::gmc2: |
All times are GMT -4. The time now is 05:55 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com