|
Re: project draggin k5
hahaha....that looks familiar....i traded that blaze to my buddy mike in parker to get my bagged 68 burb back, then the bagged 68 burb went back on ebay to a guy in cali, now my blaze ended up in texas......small world.... thats a 3.5" z.....i never really thought of it as scary but.....i guess if you are a bit squeemish it might be a little frightening??? that 1/4" flat bar is on the inside just as an added bonus, it is fishplated with 1/4" plate on the outside of the rails as well. give ya 5 bucks if you can break it!! was gonna finishin plating the bottom and boxing it in for cosmetic purposes but never got to it. good luck with the project. i still got the trans xmember i fabbed for that thing sitting in my shop too.
|
Re: project draggin k5
p.s. just incase you wanted to see what your blaze was born as....
http://imagehost.vendio.com/bin/imag...z/DSC00449.JPG |
Re: project draggin k5
i got pics of the plates that were tig welded in, i had them waterjet cut from some templets i made, i should have got pics of the plates they were pretty! pics coming soon
|
Re: project draggin k5
yep it will have slam specialties bags, and will lay out on 22s in the rear by the end of the summer..
Quote:
|
Re: project draggin k5
cant really turn with those big tires, but i have some others that will go on the wheels before the clip is back on, maybe i will get a half turn out of it then..lol
Quote:
|
Re: project draggin k5
i've run into an issue with the upper control arms, the studs on the passenger side upper are loose in the frame, can i tap them back in or should i have a shop do it for me?? please help!!
|
Re: project draggin k5
when you switched to 2d drive, did you just swap in front crossmember from the 2wd drive?
|
Re: project draggin k5
no i didnt swap crossmembers, i found a two wheel frame and swapped them out. im looking for another frame now, im going to do a full frame build while i drive the blazer and then swap the body on to the new frame, then probly sell the existing frame.
|
Re: project draggin k5
yeah thinking of doing the same thing just trying to figure out which one is easier, i got both, dont dig 4wd but the body straight wires are all good 2wd is f-ed up.
|
Re: project draggin k5
what all is wrong with the 2wd?
Quote:
|
Re: project draggin k5
update**
the crossmember has been painted and i got the lower arms back on today, here are some pics for your viewing pleasure. |
Re: project draggin k5
number one
|
Re: project draggin k5
5 Attachment(s)
pics.....
|
Re: project draggin k5
5 Attachment(s)
more pics
|
Re: project draggin k5
markep, here's a link to the way i did mine...it may help you with your decision
http://67-72chevytrucks.com/vboard/s...d.php?t=168231 |
Re: project draggin k5
|
Re: project draggin k5
|
Re: project draggin k5
|
Re: project draggin k5
|
Re: project draggin k5
|
Re: project draggin k5
so what does everyone think so far??
|
Re: project draggin k5
this blazer is gonna be badass man........i love it. i usually like my blzer in the clowds but this 1 in the weeds is bad ass. what motor u gonna run?
|
Re: project draggin k5
:agree:
|
Re: project draggin k5
i have an ls1 but i think im gonna go with a 383 w/ aluminum heads
Quote:
|
Re: project draggin k5
|
| All times are GMT -4. The time now is 06:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com