Re: My 56 6bt 4X4 build.
Quote:
|
Re: My 56 6bt 4X4 build.
Quote:
|
Re: My 56 6bt 4X4 build.
1 Attachment(s)
Eng colour dont matter. I must admitt I'm fond of the Orange trucks tho. Maby you can tell by the colour of my last project
|
Re: My 56 6bt 4X4 build.
1 Attachment(s)
355 Tremic T5 ford 9'' bum . 3:73
Texas Car . Lowered 2in in front 3 in back. Lots of fun . Sold it to pay for wedding. That was Smrt.... |
Re: My 56 6bt 4X4 build.
:lol: Well I hope you enjoyed your wedding.
|
Re: My 56 6bt 4X4 build.
I like your old car. It looks a lot like this one I have seen before. http://www.cardomain.com/ride/212157...vrolet-malibu/
By the way I have the pictures of that steering shaft but I haven't loaded it up yet. I will post it for you soon. Posted via Mobile Device |
Re: My 56 6bt 4X4 build.
Hi Luther
Thanks for the comments . I miss that car a lot. Basically , I wasnt driving it much. I built It before I bought this farm. Lived in i neighbourhood all pavement. Got this place and now I have 2 km of dirt road to make it in or out. We are suppost to get pavament this summer. The guy who bought the car off me has it forsale again too. For much less than he paid for it . If we get paved maby I will go knock on his door..... That green one you sent the link for was nice . Almost Identical stance , and wheels. As for the steering , looking forward to the pics. Inparticular the 55 column end . Hope you and your family has a great x mass. |
Re: My 56 6bt 4X4 build.
4 Attachment(s)
A few more pics . Man that Cummins looks bigger on the floor !
Its going in tho so let the fun begin. Here is link to a fun Video . Lots more HP than mine will ever have but what Im looking for in the end . |
Re: My 56 6bt 4X4 build.
Yes they look really big on the floor. And it's a lot more fun to do burn outs with out holding the brakes. :lol:
|
Re: My 56 6bt 4X4 build.
Quote:
Let me know your thoughts on this . Thanks |
Re: My 56 6bt 4X4 build.
1 Attachment(s)
These are the mounts I was considdering using .
|
Re: My 56 6bt 4X4 build.
Quote:
http://67-72chevytrucks.com/gallery/...P101000411.JPG |
Re: My 56 6bt 4X4 build.
Love it Love it !!
That looks like a super resto you are in to . Keep up the good work . Going to be beautiful when done . The big truck build is super as well. Makes my cummins swap look like a walk in the park . |
Re: My 56 6bt 4X4 build.
I am looking to get back on the NAPCO sometime next summer. The big truck is almost done now. Good luck with the 6bt.....I have been intrigued by the diesels but have not caught the bug yet.
|
Re: My 56 6bt 4X4 build.
Quote:
you are correct on the solenoid. 12v to open the solenoid and supply fuel, cut the 12v supply and it cuts the fuel. Ryan |
Re: My 56 6bt 4X4 build.
I cant take your advice . You went and put a body on top of that beautiful frame !!
I went thru your build last nite . Didnt get to bed till 2 ! Your fab work is amazing ! I would just put a bucket seat on top of that and drive it around to show off. I had the same concerns you did abt the bellhousing . That's why I was looking for more input. Thinking I still may use a boat eng mount just fab brackets in the center in orriginal position. My fab work is now where close to yours. I need to fab in 90 deg angels . Hey while I have you do you know where the oil pressure sender is ? Im sure I can find it but I just thot I would ask . |
Re: My 56 6bt 4X4 build.
Quote:
http://i94.photobucket.com/albums/l84/ryanroo/001-3.jpg its the little fitting/electrical connector behind the PS pump on the block |
Re: My 56 6bt 4X4 build.
thanks for the reply.
Yep I have that same sender . Just wasnt sure if it went into water or oil. I may use a hydroboost. have 2 early 80's setups somewhere . They use the typical power steering pump? I thot u were using hydro so I figured you would know . As for the mounts I meant I'd do same as you . Stock location on eng and make up a cross member for trans or maby use dodge one. Just with more 90 's Lol. Is your truck up and running ? i didnt see a date on your last post . Eyes kept trying to close... |
Re: My 56 6bt 4X4 build.
I get where you are at on the mounts, sometimes my brain is a little slow...
you can use a non HB steering pump. there may be a some flow/pressure issues with that but that is an easy fix with the flow orifice and pressure spring in the pump. literally a half hour to up the pressure and flow with the pump in the truck. i've used non HB pump with HB and had no issues before, so it may not matter either way. if you have a non HB pump you have to either add a return port to the can for the HB or Tee the steering box return. both ways work. i plan on adding a return port to the can on mine, or finding a pump from 1st gen 24v truck that had HB and use that. my truck is no where near running. i just got started doing rust repair on the cab a few weekends ago, and i am slow in making progress. my garage is cold and i am lazy! hope to get the cab to the blaster and then to the paint/finish body guy in january. then the fenders and doors. then the bed. the paint is being done one area at a time so i dont have to swallow the whole bill at once. i still need to get a wiring harness, lift pump and torque converter and rebuild the dana 60 before i can think about it being a runner. and i think i am going to use the green and white bed on the parts truck and use a different bed i found locally on the diesel. but there is some bartering/fabrication i have to do before that happens, so.... Ryan |
Re: My 56 6bt 4X4 build.
Going to be nice when done. For what it is worth I used a American auto wire harness in my 56 1st time around . It was a super product and super easy to install. Detailed instructions helped a lot !!!. Had a lot of opitinal upgrades available as well.
|
Re: My 56 6bt 4X4 build.
1 Attachment(s)
So alittle more progress today .
The best tool I own is blue and way too big to fit in my tool box. Ca you guess what it is ????? |
Re: My 56 6bt 4X4 build.
1 Attachment(s)
Now I can get to work cleaning these up and replaceing some well worn front end parts .
|
Re: My 56 6bt 4X4 build.
1 Attachment(s)
Anyone into lowered Dodges ???? Some call it in the weeds . Today it's in the snow .
:lol: |
Re: My 56 6bt 4X4 build.
Quote:
I think Im goig to take your advice on the frame boxing . The front anyway. I just got the Stock steering box out and the frame kinda looks swiss cheezy there . No rust or hacking just too much light shining thru holes to make me think it will take the weight and added tork. |
Re: My 56 6bt 4X4 build.
This will be a cool project to watch. My daily is an 06 cummins ram 2500 HD with a ton of mods. Definitely can smoke the tires like all hell too especially when pulling a trailer. :lol:
|
All times are GMT -4. The time now is 11:15 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com