The 1947 - Present Chevrolet & GMC Truck Message Board Network - TX Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Page 2 of 3

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)

- - TX Parting out 1973 Chevrolet Cheyenne C20 3/4 ton (https://67-72chevytrucks.com/vboard/showthread.php?t=503635)

WIDESIDE72

03-02-2012 02:47 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by dieselmec1993 (Post 5218445)

do u still have this if u do i would like the frame and the front with arm suspention if u still have it or just frame will work

Any ideas on getting the chssis to Indiana???

WIDESIDE72

03-02-2012 02:49 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by trout (Post 5216943)

I want the door panels if he passe
Posted via Mobile Device

No one has said "I'll take it" on the door panels.

trout

03-02-2012 03:00 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

I WILL TAKE them if all goes well over the weekend and and can you get me a shipping quote to 29073 be monday before i can get them money and do you take money orders?

dieselmec1993

03-03-2012 09:11 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by WIDESIDE72 (Post 5225357)

Any ideas on getting the chssis to Indiana???

Ya I have an uncle in dallas texas that will bring it up
Posted via Mobile Device

WIDESIDE72

03-04-2012 03:09 AM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by trout (Post 5225380)

I WILL TAKE them if all goes well over the weekend and and can you get me a shipping quote to 29073 be monday before i can get them money and do you take money orders?

I will take a money order. No rush as it will take me a little time to get shipping figured anyway. It will be around $25 or so though to ship them.

WIDESIDE72

03-04-2012 03:18 AM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by dieselmec1993 (Post 5228111)

Ya I have an uncle in dallas texas that will bring it up
Posted via Mobile Device

We can do it a few ways. I have a torch and can cut the frame at the firewall if you don't need the frame in one piece $150 if I run the hot wrench :devil:

OR I sell whole truck minus partsI want to keep to sell like front bumper, full floater rear axle and a few other odds and ends and load it on his trailer with my front end loader. $250 (This would include the cab, doors,front clip seat and bed. All of it is either rusty or dented up. BTW, I have a clear title to the truck in case you need it.:ito:

Unfortunately I had a completely rust free 82 3/4 ton Suburban w title that I stripped a couple of years back that had a tight suspension under it. It went to the creusher due to no interest her or on the local Craigslist.

WIDESIDE72

03-04-2012 03:19 AM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by azjaeger (Post 5217304)

How are the Cheyenne 20 emblems on the front fenders?

on a scale of 1-10, around a 6

WIDESIDE72

03-04-2012 03:20 AM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by MilkyJoe (Post 5217343)

does it have the Cab Band?

Thanks,
Chris

Ill have to check. How do you get that off, anyhow?

WIDESIDE72

03-04-2012 03:22 AM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

5 Attachment(s)

thought that I had photos on this thread...Oh well, here we go...

WIDESIDE72

03-04-2012 03:24 AM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

5 Attachment(s)

trout

03-04-2012 10:23 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by WIDESIDE72 (Post 5228828)

I will take a money order. No rush as it will take me a little time to get shipping figured anyway. It will be around $25 or so though to ship them.

can you get better pics of the wood grain please specialy the passenger side thank you

service_engine_soon

03-07-2012 11:14 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

How much do you want for all the body molding and both tail light lens?

Number21

03-09-2012 10:10 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

How much for the gas filler inlet pipe and cap?

azjaeger

03-09-2012 10:20 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

what would you like for both the Cheyenne 20 emblems shipped to 85122?

WIDESIDE72

03-10-2012 12:50 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by service_engine_soon (Post 5237652)

How much do you want for all the body molding and both tail light lens?

I don't think that there is a straight piece of molding on the truck. I plan to make a truck bed trailer out of the bed so will be using the tail light lenses.

WIDESIDE72

03-10-2012 12:52 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by azjaeger (Post 5241915)

what would you like for both the Cheyenne 20 emblems shipped to 85122?

$30 shipped for the emblems, but it will be a while before I can get them off.

WIDESIDE72

03-10-2012 12:52 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by Number21 (Post 5241891)

How much for the gas filler inlet pipe and cap?

$30 shipped, but it will also be a while before I can get them off.

azjaeger

03-10-2012 11:10 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by WIDESIDE72 (Post 5242929)

$30 shipped for the emblems, but it will be a while before I can get them off.

I will take both the Cheyenne 20 fender emblems for that. PM me when you are ready to do it. If you do paypal that would be great. Thanks!

Magic0nas

04-09-2012 12:05 AM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

hi,
how much for the steel wheels and the headlights.?
Regards,
Nas
zip code 77027 Houston. TX

owner 84

04-15-2012 08:15 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Hi

I want the pair that join two slide windows, and cargo switch

http://farm8.staticflickr.com/7203/7...309cb6cd_z.jpg

WIDESIDE72

04-18-2012 02:05 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by owner 84 (Post 5315700)

Hi

I want the pair that join two slide windows, and cargo switch

http://farm8.staticflickr.com/7203/7...309cb6cd_z.jpg

Not splitting these parts up

owner 84

04-27-2012 12:40 AM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by WIDESIDE72 (Post 5321919)

Not splitting these parts up

Thank you

if you think that you would sell them let me know because you will do me a favor :thud:

fm$ kid

04-27-2012 12:35 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

can i get the length of the driveshaft? if it fits mine id dlike it so can i get a price also? thanks
Posted via Mobile Device

trout

04-27-2012 01:14 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

Quote:

Originally Posted by WIDESIDE72 (Post 5216730)

Plastic is in good shape, not chalky, the wood grain is worn off driver side where previous owner rested his asrm. The passenger side is better, elastic is gone in both storage pockets, both arm rest pads are so so. $50 + shipping for pair

minds getting a shipping quote for these

Ford Assassin

04-30-2012 06:31 PM

Re: Parting out 1973 Chevrolet Cheyenne C20 3/4 ton

I need some 2wd V8 motor mount clam shells if you have them. If so, shipping to Bakersfield, Ca. 93308 would be great!!

Thanks!!

All times are GMT -4. The time now is 03:56 AM.

Page 2 of 3

Show 40 post(s) from this thread on one page