Re: K1416 Suburban part-out- Rolling Chassis
4 Attachment(s)
Quote:
|
Re: K1416 Suburban part-out- Rolling Chassis
Quote:
Yes that is it. How much? It should fit in a flat rate box. |
Re: K1416 Suburban part-out- Rolling Chassis
Quote:
SOLD |
Re: K1416 Suburban part-out- Rolling Chassis
i`m interested in the rod between the ps gear box and the front axle. how much shipped to elberton ga 30635 ?
|
Re: K1416 Suburban part-out- Rolling Chassis
1 Attachment(s)
Quote:
|
Re: K1416 Suburban part-out- Rolling Chassis
I hesitated to call it a tie rod because I knew it had to be homemade. I have a 68 Suburban with closed knuckle front end that I'm trying to add power steering to. Does it look cobbled together or like somebody did a decent job?
|
Re: K1416 Suburban part-out- Rolling Chassis
3 Attachment(s)
Quote:
SOLD |
Re: K1416 Suburban part-out- Rolling Chassis
Quote:
Thank you |
Re: K1416 Suburban part-out- Rolling Chassis
1 Attachment(s)
Got the mounts, thanks. Do you have this brace?
|
Re: K1416 Suburban part-out- Rolling Chassis
Quote:
|
Re: K1416 Suburban part-out- Rolling Chassis
5 Attachment(s)
Parts remaining- prices plus shipping & PP fees
Axle, front $200 '65 Dana 44 Closed Knuckle, 3.73, open carrier, 6 lug, excellent condition, no shipping Axle, rear $50 SOLD '65 3.73, open carrier, 6 lug, fair condition, no shipping Transmission $200 SOLD '69 SM465 4 spd, no shipping Cylinder Heads, 3932441 $100 SOLD Both dated A-9-9. bare castings Steering Gear w/ pitman arm $125 Integral box, '69 (?) |
Re: K1416 Suburban part-out- Rolling Chassis
5 Attachment(s)
Crossmember $75
K10 manual transmission, with spring mounts and hardware Lift blocks $50 SOLD cast iron, rear axle, with clamps Jounce Bumper Blocks $25 cast iron, front axle Spring Mounts $25 ea SOLD Front - forward LH, forward RH Rear - forward LH, forward RH, rearward RH |
Re: K1416 Suburban part-out- Rolling Chassis
2 Attachment(s)
Brass Fittings- $25 SOLD
brake plumbing, 4 pcs Clutch Linkage $25 Frame bracket, cross shaft, Rod, Lever w/ Hardware |
Re: K1416 Suburban part-out- Rolling Chassis
Quote:
|
Re: K1416 Suburban part-out- Rolling Chassis
How bad are the suburban/panel/carryall specific rear frame pieces, or do you still have them at all?
|
Re: K1416 Suburban part-out- Rolling Chassis
Quote:
|
Re: K1416 Suburban part-out- Rolling Chassis
I will take the brass fittings for brake lines.
|
Re: K1416 Suburban part-out- Rolling Chassis
How are the front horns, what price are they? I will take depending on price.
Cut behind the motor mounts and include radiator crossmember. Send photos please of frame as is now. Price on the front spring Mounting brackets, will take pending price. Price for rear spring shackles front and rear, will take pending price. Will you take 100 for the five of them? |
Re: K1416 Suburban part-out- Rolling Chassis
1 Attachment(s)
I will take the transfer case shift linkage pending price/shipping.
Photo of needed parts circled in yellow. All except pins in TC. |
Re: K1416 Suburban part-out- Rolling Chassis
Quote:
Rad crossmember- pics tomorrow Rest of frame - pics tomorrow Spring mounts- $100 for 5 is OK Transfer case & all associated parts are already sold |
Re: K1416 Suburban part-out- Rolling Chassis
I will take the 5 spring mounts. Maybe ship in large Usps flats rate box.
Ok if wait, to pay until we finish if getting additional parts after tomorrow Pictures. Thanks, |
Re: K1416 Suburban part-out- Rolling Chassis
3 Attachment(s)
Rad crossmember- Some rust, couple nicks from the torch, but very usable. Truck had never been in an accident so part is straight $20
|
Re: K1416 Suburban part-out- Rolling Chassis
3 Attachment(s)
Frame horns- cracked & bent, some rust $20/pr
Rest of frame - Sad picture. Valued @ $.50 in scrap steel |
Re: K1416 Suburban part-out- Rolling Chassis
3 Attachment(s)
Thanks for pictures:
Will take the front frame horns. And left front frame rail sections circled in yellow. Will confirm with you frame rail needEd on left side with engine mount in more detail. Do you have frame right side engine mount/perch? Will take if you have too. Also in second photo, do you have both side of rear frame circled in yellow? Third photo below do you have the body mount circled both side? |
Re: K1416 Suburban part-out- Rolling Chassis
5 Attachment(s)
Quote:
Next LH frame section is not bad rust-wise. Factory engine mount is good. Truck was originally a 292 six. RH engine mount is not original- see bolts. A 350 V8 had been transplanted and the RH engine mount did not fit correctly. In fact the RH side of the engine was held in by gravity, so I don't think this will be of any good to you. |
All times are GMT -4. The time now is 12:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com