The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   PA Rippens believe it or not another 72 blazer 3ott part out (https://67-72chevytrucks.com/vboard/showthread.php?t=793051)

1rippen6 09-07-2019 04:08 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by tmontg01 (Post 8589175)
I will take that with the throttle cable as well please, PM me your PayPal and total with the cable as well. Thank you! If there happens to be the center speaker with brackets it’d take that too.

The cable is longer than it should be but I should have an original. Do you need a 2 barrel or 4 barrel cable or are they the same. I grab a picture tomorrow morning.

Early Rider Steve 09-07-2019 06:05 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
do You have the, fuel filler neck, inside cover, quarter panel cut for the filler neck? If so how much?

tmontg01 09-07-2019 06:47 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by 1rippen6 (Post 8589280)
The cable is longer than it should be but I should have an original. Do you need a 2 barrel or 4 barrel cable or are they the same. I grab a picture tomorrow morning.

Okay sounds good, if there's a difference i'll take the 4 barrel cable.

Eagle9502 09-07-2019 09:13 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by 1rippen6 (Post 8588956)
Not sure, I didn't look but if it is it will go with the engine.

Please let me know, thanks

1rippen6 09-07-2019 11:58 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by Early Rider Steve (Post 8589334)
do You have the, fuel filler neck, inside cover, quarter panel cut for the filler neck? If so how much?

I'll get you some pictures tomorrow.

Razorbacker 09-08-2019 01:15 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
It's probably cost prohibitive to ship...but are the front and rear springs available, price?

1rippen6 09-08-2019 04:24 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
3 Attachment(s)
Quote:

Originally Posted by tmontg01 (Post 8589175)
I will take that with the throttle cable as well please, PM me your PayPal and total with the cable as well. Thank you! If there happens to be the center speaker with brackets it’d take that too.

No speaker, here is a correct cable 60 shipped for everything I'll pm info.

1rippen6 09-08-2019 04:35 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by 72blzrWA (Post 8589243)
Interested in that transfer case shifter knob if it's decent (7/16" thread only). radio, wiper blades, front rain deflectors for double wall top.

In line for center speaker, inside spare tire carrier. Thanks Dwayne!

I have this knob I'll sell for 40
No radio
Wiper arms 20
It has a single wall top
No speaker or inside tire carrier
Dash looks good corner are not rusted out 80

Plus shipping

1rippen6 09-08-2019 04:36 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
5 Attachment(s)
Forgot pictures lol

1rippen6 09-08-2019 04:41 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
3 Attachment(s)
Quote:

Originally Posted by Eagle9502 (Post 8588952)
4x4 dipstick & tube?

Looks like the 4x4 dipstick to me

1rippen6 09-08-2019 04:48 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
5 Attachment(s)
Quote:

Originally Posted by Early Rider Steve (Post 8589334)
do You have the, fuel filler neck, inside cover, quarter panel cut for the filler neck? If so how much?

Filler neck has a few holes at the bottom, if you using as a truck setup they may not matter. Cut it of above the hoses and use hoses or I have some bottom elbows off some 69-71 filler which were 2 pcs.


Cover has some rust out on the bottom corner other than that it's ok

Filler 25
Elbow 15 if you what to go that route
Cover 25
Hole cutout 35

All plus shipping

1rippen6 09-08-2019 04:49 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
3 Attachment(s)
Pics

1rippen6 09-08-2019 04:57 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by Razorbacker (Post 8589847)
It's probably cost prohibitive to ship...but are the front and rear springs available, price?

100 plus shipping but they are probably almost 50 year old springs.

1rippen6 09-08-2019 05:06 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
3 Attachment(s)
Quote:

Originally Posted by Martyt (Post 8589030)
Pm sent!

Only good part on the quarters are the taillight areas.

72blzrWA 09-08-2019 05:11 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by 1rippen6 (Post 8589962)
I have this knob I'll sell for 40
No radio
Wiper arms 20
It has a single wall top
No speaker or inside tire carrier
Dash looks good corner are not rusted out 80

Plus shipping

Thanks PM'd you.

1rippen6 09-08-2019 05:16 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by 72blzrWA (Post 8589998)
Thanks PM'd you.

Replied

Eagle9502 09-08-2019 08:49 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Dewayne, can you get a shipping quote on the motor to Fastenal in 31322? Thanks

Razorbacker 09-08-2019 09:35 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by 1rippen6 (Post 8589988)
100 plus shipping but they are probably almost 50 year old springs.

Good point on the age of the springs, thanks.

72blzrWA 09-08-2019 10:05 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
1 Attachment(s)
In line for the Fuel filler quarter cut if Early Rider Steve passes. Here's the section I need if it looks good.

Early Rider Steve 09-08-2019 11:30 PM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
I will take the cover, filler, and the hole cutout. Shipping to 86426, Fort Mohave Arizona. Your address to send the Postal Money Order to. Thank You, Steve

MrGoodpliers 09-09-2019 10:24 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
How much for the passenger side taillight area shipped to 30501?

1rippen6 09-09-2019 10:29 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by MrGoodpliers (Post 8590435)
How much for the passenger side taillight area shipped to 30501?

How far back would you want it cut, to the beginning of the marker light?

1rippen6 09-09-2019 10:29 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by Early Rider Steve (Post 8590283)
I will take the cover, filler, and the hole cutout. Shipping to 86426, Fort Mohave Arizona. Your address to send the Postal Money Order to. Thank You, Steve

I'll get the patch cut and get a shipping quote today.

1rippen6 09-09-2019 10:31 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by Eagle9502 (Post 8590157)
Dewayne, can you get a shipping quote on the motor to Fastenal in 31322? Thanks

Shipping request is submitted, normally only takes them a day.

1rippen6 09-09-2019 11:19 AM

Re: Rippens believe it or not another 72 blazer 3ott part out
 
Quote:

Originally Posted by Eagle9502 (Post 8590157)
Dewayne, can you get a shipping quote on the motor to Fastenal in 31322? Thanks

Fastenal came back with 179.41 for shipping


All times are GMT -4. The time now is 08:19 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com