Re: post all bagged c10 here
2 Attachment(s)
Here's mine.
|
Re: post all bagged c10 here
2 Attachment(s)
Man I almost feel like I shouldnt put mine on here till its completely slammed but here it is as it sits now, looks high to me after browsing thru this thread
|
Re: post all bagged c10 here
1 Attachment(s)
Not even close to layin frame but here is a pic of mine.
Attachment 301543 This is as low as I could go without modifying the inners fenders and bed. Basically, I have a little less than an inch of clearance from the pumpkin to the lower side of the bed and from the top of the tire to the inner fenders up front. |
Re: post all bagged c10 here
Quote:
|
Re: post all bagged c10 here
figured i might as well throw in my project longbed.
http://i22.photobucket.com/albums/b3...9/100_0752.jpg http://i22.photobucket.com/albums/b3...9/100_0753.jpg |
Re: post all bagged c10 here
Quote:
mine: http://farm2.static.flickr.com/1220/...6ba337.jpg?v=0 |
Re: post all bagged c10 here
Here's mine. Nothing special, and also not complete :)
http://newt0.com/simplegal/galleries...2838_sized.jpg http://newt0.com/simplegal/galleries...8123_sized.jpg |
Re: post all bagged c10 here
I think I get the most incomplete bagged C-10 award!
http://i149.photobucket.com/albums/s...5/100_1436.jpg |
Re: post all bagged c10 here
It's sweet, but takes a lot of time, money, & effort to get em there
Heres an update on mine No springs in the back, but should be close to ride height for a while http://i81.photobucket.com/albums/j2...DSCF0005-1.jpg |
Re: post all bagged c10 here
2 Attachment(s)
Kyle's 67
|
Re: post all bagged c10 here
3 Attachment(s)
Heres mine... It doesnt get nearly as low as most with air... I built the truck with springs then decided to throw air on it and didn't want to cut it up... Its not notched into the bed and the inner fenders are still in it and its got a pretty tall tire... The one I am building now is getting hammered.... Stay tuned!
|
Re: post all bagged c10 here
1 Attachment(s)
Here's an old pic of my 71 project.
|
Re: post all bagged c10 here
1 Attachment(s)
heres minean old one
|
Re: post all bagged c10 here
centerline zooms i hope to have it rolling this comming summer
|
Re: post all bagged c10 here
Are they directional or does one side go one way & the other the opposite ???
Where in Ok are you |
Re: post all bagged c10 here
no they are not directional wish they were in am buy muskogee 30 min south on 69 hwy( checotah ) the back spacing on the 20 5 3/4 and rear 4 3/4
|
Re: post all bagged c10 here
opps the rear ones are 22
|
Re: post all bagged c10 here
4 Attachment(s)
Quote:
|
Re: post all bagged c10 here
1 Attachment(s)
here's mine. spindles and bags up front, blocks and bags in rear. still has fender wells up front and stock floor in rear. has a traditional frame notch, no step notch.
|
Re: post all bagged c10 here
2 Attachment(s)
my 67 and 68
|
Re: post all bagged c10 here
|
Re: post all bagged c10 here
2 Attachment(s)
Here's mine: EC Spindles, ART A-arms, slam bags up front, slam bags and c-notch out back. Still has stock wheel wells and bed floor.
|
Re: post all bagged c10 here
Does it count if it ain't finished? That is my ride height which is 5".
http://i194.photobucket.com/albums/z...rogress002.jpg |
Re: post all bagged c10 here
2 Attachment(s)
here is mine.. its now 2 inches lower in the rear and has a new billit grill
|
Re: post all bagged c10 here
4 Attachment(s)
ok here is some new ones i just took.. on pavement and with the new grill
|
All times are GMT -4. The time now is 08:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com