Re: Door Assembly...the EASY way
Great helpfull thread,
Helped me out a few days ago. I have been procrastinating assembling my 67 doors,I think I'm soon ready to do them with confidence now. |
Re: Door Assembly...the EASY way
Ttt
|
Re: Door Assembly...the EASY way
I printed out your instructions and used part of them today,I changed my window channel felts..had to remove the channel and window wing to change the parts...thanks so much for the great instructions..
|
Re: Door Assembly...the EASY way
It will not be too long now and I will be assembling mine and will also print out these instructions, it is awesome to be able to share such wisdom with each other :chevy:
|
Re: Door Assembly...the EASY way
Another great reason for subscribing to this site!!
Appreciate all the great ideas, hints, tips, and tricks. Thank you 😊 |
Re: Door Assembly...the EASY way
Quote:
|
Re: Door Assembly...the EASY way
Thank You.
Right click <save as> Cheers! |
Re: Door Assembly...the EASY way
Thank you, your instructions were a big help.
|
Re: Door Assembly...the EASY way
perfect
|
Re: Door Assembly...the EASY way
Quote:
Can someone answer this? I just broke my window trying to get the vent window back in. Didn't see this post. Dummy me. I do have a replacement so I want to make sure I'm doing this right. I read through this post but didn't see anyone answer this question. Pictures always work the best. :) Mike |
Re: Door Assembly...the EASY way
The lower channel that I refer to is the one at the back of the window. Held in by 3 screws. One is located above the latch and 2 are side by side under the door panel at the rear of the door. You remove it along with the weatherstrip that starts at the top of the window openening and runs all the way around and down into the door into the "rear run channel"
|
Re: Door Assembly...the EASY way
Ttt
|
Re: Door Assembly...the EASY way
Two things... 1. Where is the picture of the new tool? 2. Can we get a video?(lol...J/K)
Thanks for taking the time to write this up for us! Jimmy |
Re: Door Assembly...the EASY way
Hey Randy, I disassembled 5 doors the other day & used your instructions. Made it easy, thanks alot!
|
Re: Door Assembly...the EASY way
Quote:
|
Re: Door Assembly...the EASY way
Great write up, Thanks!
|
Re: Door Assembly...the EASY way
Marked for later. Thanks.
|
Re: Door Assembly...the EASY way
Also subbed.
|
Re: Door Assembly...the EASY way
Great info to have! Thank you,
The people on 67-72 never seem to amaze me any more. Bill |
Re: Door Assembly...the EASY way
Great write up, thanks. Been dreading changing the window rubbers and whiskers.
|
Re: Door Assembly...the EASY way
Sub'd
|
Re: Door Assembly...the EASY way
Thank you! Thank you! Thank you! Just finished up reassembling my doors and this was the best step by step process by far! :metal::metal::metal:
Gary |
Re: Door Assembly...the EASY way
Great post Randy, Thanks ....I butchered / mangled..up 1 side getting the sweeps out. Read the post and had the 2nd side out in minutes. Could use a tutorial on how to install the sweeps with out damaging new paint....Ed
|
Re: Door Assembly...the EASY way
sub'd
|
Re: Door Assembly...the EASY way
Quote:
|
All times are GMT -4. The time now is 04:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com