Re: 1986 swb bagged and bodied build thread
5 Attachment(s)
Few more pics after we mounted the body on while test fitting the old motor and trans
|
Re: 1986 swb bagged and bodied build thread
Looks killer, I like the wheels with the spiked lugs
|
Re: 1986 swb bagged and bodied build thread
Quote:
|
Re: 1986 swb bagged and bodied build thread
I find it amazing that you can do all that to a frame, but you can't post pictures in here properly. LOL
Looking great!!!!!!(but I have a crick in my neck!) |
Re: 1986 swb bagged and bodied build thread
Quote:
But thanks! |
Re: 1986 swb bagged and bodied build thread
looking good man! keep up the progress!!!!
|
Re: 1986 swb bagged and bodied build thread
what size tubing did you use inside the frame rails where you trimmed the belly out of the frame under the cab?
|
Re: 1986 swb bagged and bodied build thread
Quote:
Then once I write up my detail, I scroll down this page to the button that says "Manage Attachments". Hit it and you can browse your pics and upload them one at a time. If they were not saved correctly you can rotate them before uploading them. hope it helps. |
Re: 1986 swb bagged and bodied build thread
5 Attachment(s)
Here you go.
|
Re: 1986 swb bagged and bodied build thread
Quote:
Quote:
And I used 4x2 rectangle. Turned out to be perfect and really made sure we got some good welds on it! |
Re: 1986 swb bagged and bodied build thread
Looks great! Keep up the good work.
|
Re: 1986 swb bagged and bodied build thread
Quote:
|
Re: 1986 swb bagged and bodied build thread
5 Attachment(s)
Ok got some more work done this weekend. Got the notches in , built the crossmember behind cab built. Got the cross bars from notch to notch in. Also set the rearend back under truck and checked measurements. Couldn't have built the notches to a better height to clear. Filed in holes on the frame and grounded them down. Also cut all brackets off rearend and got it all ground down and ready for the new link mount tabs. Scored a couple of brand new air tanks this week, also test fit gas tank and it clears great. Well here's some more pics.
|
Re: 1986 swb bagged and bodied build thread
Looks good man.
|
Re: 1986 swb bagged and bodied build thread
2 Attachment(s)
Nice work. I have jumped into the middle of my "bagged and bodied" build. Doing a 78.
Here is your pic flipped. |
Re: 1986 swb bagged and bodied build thread
Quote:
|
Re: 1986 swb bagged and bodied build thread
Quote:
|
Re: 1986 swb bagged and bodied build thread
Quote:
|
Re: 1986 swb bagged and bodied build thread
you say ppl here think you crossed the line you should have seen the hundreds of comments lmfao
|
Re: 1986 swb bagged and bodied build thread
Quote:
Quote:
|
Re: 1986 swb bagged and bodied build thread
Yea an they was telling the truth bout all the stuff they was saying an i agree with them
|
Re: 1986 swb bagged and bodied build thread
Quote:
|
Re: 1986 swb bagged and bodied build thread
Looks good, any updates!?
What tire size and backspacing are you running on those wheels. Are you going to have to shorten the axle? |
Re: 1986 swb bagged and bodied build thread
Quote:
|
Re: 1986 swb bagged and bodied build thread
5 Attachment(s)
Little update on the truck, got the lower bars finished. Built the upper 3 link bar. And got bag mounts built. Getting closer to be a function roller
|
All times are GMT -4. The time now is 12:07 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com