Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
Ordered mine today!!
|
Re: The LS1 swap headers are done!!!!
Jamie, check your PM's. I have some feedback on these for the 73-87's. I will be sending you the pics in an email.
|
Re: The LS1 swap headers are done!!!!
Here's a part number for the plug wires:
MSD Connector wires 8.5mm 32819 $67 |
Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
Holy Horepower Batman!!!
That thing is awesome! |
Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
Quote:
R/ |
Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
I am still going to use Thorleys, just going to wait until the get them modified for 73-87's. There is just a clearance issue with the tube going over the top.
I am using standard S&P plates. |
Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
Quote:
This is with ECE plates (almost 3" forward from normal) http://www.73-87chevytrucks.com/proj..._clear_ece.jpg This is with S&P plates (where it is supposed to be) http://www.73-87chevytrucks.com/proj...lear_sandp.jpg I am really wanting to move the engine back another 1" if I can, but I would settle with what I have. |
Re: The LS1 swap headers are done!!!!
I'm currently working with another member to see if the headers work with the later body style with different mounts. I will keep you guys posted.
Jamie |
Re: The LS1 swap headers are done!!!!
What mounts are they Jamie? I have had 3 different motor plates from 3 different sources, they are all the same as far as location goes. The only different one would be ECE motor mounts which move the engine WAY to far forward for a 73-87 bodystyle (see above pic)
|
Re: The LS1 swap headers are done!!!!
Quote:
It pcmcobra and he is using the carshop plates. He is anticipating the same issues. We will know more early next week when he gets to try the headers on. Looks like its only one pipe on the d/s that is hitting the power brake booster. I know that the engine in the 67 I did seemed to be way foward as well. Anybody have a 73-87 with the ece or cpp mounts? |
Re: The LS1 swap headers are done!!!!
If they are these plates, they are the same as everyone elses stuff.. Common 4 hole SBC mount with a LS 3 hole mount and common lower hole, spacing won't be any different.
http://carshop.carshopinc.com/produc.../86959/C/S2349 here is the comparison: Carshop: http://www.carshopinc.com/images/LS1GM.jpg S&P: http://www.73-87chevytrucks.com/proj...ndp_plates.jpg |
Re: The LS1 swap headers are done!!!!
Ok,
I got the headers today, and I can verify I am having the same issue as capt, kaos. I am using the carshop plates, pretty much the same "standard" design as posted above. Drivers side is hitting firewall "protrusion, same exact as posted above. http://i114.photobucket.com/albums/n...976640x480.jpg Passenger side seems fine: http://i114.photobucket.com/albums/n...971640x480.jpg |
Re: The LS1 swap headers are done!!!!
[quote=pcmcobra;2729329]Ok,
I got the headers today, and I can verify I am having the same issue as capt, kaos. I am using the carshop plates, pretty much the same "standard" design as posted above. Drivers side is hitting firewall "protrusion, same exact as posted above. Passenger side seems fine: I wonder if the ECE mounts will give you more room? I know they will move the engine forward a couple of inches. Do yoyu have the room? |
Re: The LS1 swap headers are done!!!!
Rob,
I am not sure. I could look it over and see, who's got some ece mounts for me to try? |
Re: The LS1 swap headers are done!!!!
Quote:
|
Re: The LS1 swap headers are done!!!!
ouch, those ece mounts are $219...
I'd rather use the mounts I have. Even sent the tranny xmember off to get a little "work" done to it so the 80 will bolt up. Hopefully we can get this figured out. |
Re: The LS1 swap headers are done!!!!
Nice,i plan to upgrade to a LS1 later!!
I need some headers for my 283 v8 Can u(beat) give me a better price than $275? http://i101.photobucket.com/albums/m...00_tmp_org.jpg |
Re: The LS1 swap headers are done!!!!
1 Attachment(s)
You could always try this........................
:D. |
Re: The LS1 swap headers are done!!!!
lol@rob...
I have not gotten to that point yet...but I do have a bucket full of BFH's for stress relief, or persuasion... |
All times are GMT -4. The time now is 09:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com