Re: project BIG RED (gen3 on air)
 

Don is the man!! he has incredible hulk and big red going on right now that i know of.... great work and progress as usual don. I will probably be contacting you in the future...... wiring and i dont get along :lol:

Re: project BIG RED (gen3 on air)
 

You know, it is not fair that you get to have so many projects at once, especially with a nice sized garage like that, you and Matt (spraybomb) hmmmmmm,

Re: project BIG RED (gen3 on air)
 

come on now, i actually finish my projects tho:lol:

Re: project BIG RED (gen3 on air)
 

LOL so true, sorry matt.

Re: project BIG RED (gen3 on air)
 

after i got it all tore down, i put the rear end and trailing arms back in, so i could do a mild c-notch..then i modified the frame to accept the bags..afther that i modified the front arms to accept the bags, the front steering stops will be added later (ill have to make some diffrent ones).....and finally i put the engine and trans in, in preporation to make it a roller again (on 22/20 combo)
http://i25.photobucket.com/albums/c8...d/100_1911.jpg
http://i25.photobucket.com/albums/c8...d/100_1918.jpg
http://i25.photobucket.com/albums/c8...d/100_1912.jpg
http://i25.photobucket.com/albums/c8...d/100_1920.jpg
http://i25.photobucket.com/albums/c8...d/100_1928.jpg
http://i25.photobucket.com/albums/c8...d/100_1940.jpg
http://i25.photobucket.com/albums/c8...d/100_1948.jpg

Re: project BIG RED (gen3 on air)
 

where'd ya get the tires/wheels?

Re: project BIG RED (gen3 on air)
 

What he said....:)... I think you have ADD worse than me, (68SS).......:lol:.

Re: project BIG RED (gen3 on air)
 

coys wheels......

Re: project BIG RED (gen3 on air)
 

Nice! Hoping to learn from your LS installs!

Re: project BIG RED (gen3 on air)
 

Looking great.

Re: project BIG RED (gen3 on air)
 

Nice to see another short bed being built to be a DD instead of a show pony, these trucks were way too awesome to be trailer queens.

Re: project BIG RED (gen3 on air)
 

ok here is a little update,i had to put the bad back on, so i could mount the airtank and compressor, then took the bed back off after everything was mocked-up...also mounted and plumbed the tranny cooler.. got the wheels /tires put on..... put the headers on, welded the v-band clamps on for the collector, and cut the holes in the crossmember for the exhaust to go through....finally, i got my valves mounted, just behind the rear axle.....
http://i25.photobucket.com/albums/c8...d/100_1929.jpg
http://i25.photobucket.com/albums/c8...d/100_1930.jpg
http://i25.photobucket.com/albums/c8...d/100_1950.jpg
http://i25.photobucket.com/albums/c8...d/100_1951.jpg
http://i25.photobucket.com/albums/c8...d/100_1952.jpg
http://i25.photobucket.com/albums/c8...d/100_1953.jpg
http://i25.photobucket.com/albums/c8...d/100_1957.jpg
http://i25.photobucket.com/albums/c8...d/100_1958.jpg
http://i25.photobucket.com/albums/c8...d/100_1961.jpg
http://i25.photobucket.com/albums/c8...d/100_1962.jpg

Re: project BIG RED (gen3 on air)
 

Nice Progress...

Re: project BIG RED (gen3 on air)
 

keep up work the work man looks good!!!

Re: project BIG RED (gen3 on air)
 

Looks great, how much did those coys run you if you dont mind me asking?

Re: project BIG RED (gen3 on air)
 

bout 2g

Re: project BIG RED (gen3 on air)
 

2g just for wheels? or with tires?

Re: project BIG RED (gen3 on air)
 

that was wheels, tires, lugnuts, mounted/balanced, and shipped

Re: project BIG RED (gen3 on air)
 

did u order them straight from coys? anyways love your work and your builds cant wait for you to do my truck

Re: project BIG RED (gen3 on air)
 

yes i called coys wheels directly, and i talked to dave (david).....they are the gunmetal with the polished lip.....the chrome ones are a bit more $$, but for this project i didnt want chrome......

Re: project BIG RED (gen3 on air)
 

that's looking great man, what size tires are you running? Do you like the Goodyears? or were they just the least expensive at the time?:metal:

Re: project BIG RED (gen3 on air)
 

What size wheels are those? They are the exact ones that I'm thinking about getting...

Re: project BIG RED (gen3 on air)
 

Don, states this in post # 30....

.....and finally i put the engine and trans in, in preporation to make it a roller again (on 22/20 combo)

Re: project BIG RED (gen3 on air)
 

Looking good man! I will have to keep an eye on this project... :metal:

Re: project BIG RED (gen3 on air)
 

a little progress to report, started smoothing the firewall.....and only found a little rust over the blower motor hole (easy fix), but other then that it was very clean and solid....
cut original heater holes out, made my templets, transfered to 16ga. sheetmetal, cut/fit, then weld and grind....
http://i25.photobucket.com/albums/c8...d/100_2059.jpg
http://i25.photobucket.com/albums/c8...d/100_2061.jpg
http://i25.photobucket.com/albums/c8...d/100_2057.jpg
http://i25.photobucket.com/albums/c8...d/100_2083.jpg
http://i25.photobucket.com/albums/c8...d/100_2084.jpg
http://i25.photobucket.com/albums/c8...d/100_2085.jpg
http://i25.photobucket.com/albums/c8...d/100_2088.jpg
http://i25.photobucket.com/albums/c8...d/100_2090.jpg