Re: 71 C30 dually restoration
Use the K20 rotors and 76-78 eldo calipers. They bolt on just like the k10/k20 front calipers but are emergency brake equipped, you just have to make sure to get the hardware kit.
P.S. when you buy pads make sure that you get semi-metallic, i didnt pay attention when i bought mine and they gave me some organic pads that look like pressed particle board. |
Re: 71 C30 dually restoration
Quote:
|
Re: 71 C30 dually restoration
Anyone know where I can get a set of '71 or '72 front rotors, 1 ton 2wd? The wagner part number is BD60442. Advance Auto, Napa and the GM dealer all say they can't get them. It's like they exist but nobody makes them anymore or something. I tried rotors from a '77 and they are about a 1/4 inch too thick. I suppose my only other option would be to find a donor front end and switch everything over. It would be so much nicer to just replace my rotors though as I have all the other new parts. All help is greatly appreciated.
|
Re: 71 C30 dually restoration
TRY WAGNER #BD60258 $30 EACH
Posted via Mobile Device |
Re: 71 C30 dually restoration
1 Attachment(s)
Quote:
Attachment 988156 |
Re: 71 C30 dually restoration
Quote:
Posted via Mobile Device |
Re: 71 C30 dually restoration
This is some good stuff. I cant wait too see the final outcome.
|
Re: 71 C30 dually restoration
WAGNER Part # BD60427
Use w/BD61708 Hub; w/Dual Rear Wheels; 11000 GVW; Front From Rock Auto Site http://www.rockauto.com/catalog/raframecatalog.php |
Re: 71 C30 dually restoration
Quote:
Posted via Mobile Device Posted via Mobile Device |
Re: 71 C30 dually restoration
Very tough build I'm in! :metal:
|
Re: 71 C30 dually restoration
Quote:
|
Re: 71 C30 dually restoration
Damn man love this truck, I so love dually's....
I am def subscribing to this thread... Sorry to hijack but do you know if one can get these truck style wheels you have up front in 6 x 6.5 lug versions and 18inch ? I love those wheels... :) :) |
Re: 71 C30 dually restoration
Nice! Almost reminds me of the 67 on Fast and Furious 5.
|
Re: 71 C30 dually restoration
Quote:
Here's a You Tube link to Fast & Furious 4: '67 Chevy Truck |
Re: 71 C30 dually restoration
before going with the eldo caddy calipers check out pirite4x4.com. they say the caddy calipers are hard to bleed and you have to readjust the parking brake alot to keep it working. I used diy4x adaptor and the front 3/4ton calipers & rotors on my 86 k30. using a line lock set up for my e-brake.
|
Re: 71 C30 dually restoration
Quote:
|
Re: 71 C30 dually restoration
Sorry guys no progress lately. I've been getting the runaround from a local scrap yard that had a set of spindles for me. They've been telling me they are going to pull them for me for me for the last 2 weeks. I got sick of waiting when the other day I backed the truck out of the shop and thought It could sit lower. I ended up ordering 3" drop spindles from airbagit.com. I should get them in about a week or so. Then I'll be posting my results. And I have some other big new in the powerplant department. But that's a story for another day.
|
Re: 71 C30 dually restoration
Going to be sick.
Posted via Mobile Device |
Re: 71 C30 dually restoration
That truck is sick. Keep post pics.
Posted via Mobile Device |
Re: 71 C30 dually restoration
Anybody know how to determine how long my 4 link bars should be?
I'm building a parallel 4 link with a panhard bar. My rear semi bags will mount just behind the axel. I've looked at a few calculators but they're way too confusing. Can I just pick a length where they mount easiest and go or am I asking for trouble? My rear tires are huge so I know I need about 10 inches of separation from the top and bottom bars but as far as length goes I'm not sure. Seems like a lot of people say as long as you can fit, Is that really true or is there a good way to determine the optimal length? Any advise is greatly appreciated. |
Re: 71 C30 dually restoration
Longer bars will allow for more travel up and down but I feel that getting them the same length is more important. Equal length will allow the axle to travel up and down without rotating and changing pinion angle. Unequal length bars will cause the pinion angle to change thoughout the axle's travel.
|
Re: 71 C30 dually restoration
Quote:
|
Re: 71 C30 dually restoration
Wow! Que linda! Saludos!
|
Re: 71 C30 dually restoration
any updates or new pics??
|
Re: 71 C30 dually restoration
5 Attachment(s)
Ok, it's been a while and time for an update. I've been madly working on winterizing my shop and getting things ready to work in cold weather. Who wants to work without walls and heat... not me. I also was helping a friend put a notch in his 69 short bed. That's all finished up now and the last few days i've finally been making some progress on the '71. Although I wanted to build my 4 link next I've been waiting now 8 weeks for suspension bushings to come that are still on the way from Thorbros, Quality Air Ride or Suicide Doors or whatever you call them these days. I talked to them yesterday and it seems my order was never placed:( Anyway, hopefully they come soon and I can build the 4 link. In the mean time I've been working on prepping my frame.
I've decided to box my frame and use the back half of it as an air take. If I enclose from just behind the rear cab mounts to the begging of the frame notch as an air tank it will give me about 10-15 gallons of air depending on how I do my cross members. I stripped out the rear end and started grinding, air chiseling and pounding out rivets. Man was that a chore! Then came the welding. Only 114 holes to fill! I started making plugs for the holes at first but in the end I found it much easier to fill the holes with weld. I used a coper pipe hammed flat and placed on the back of the hole to keep the welds from shooting through as I built up the sides and closed them in. It worked great. I welded the outside of the frame first. Then I also did the inside. Ground down my welds on the outside and touched them up. It took me a while, quite a bit of gas and wire but they are all welded in now. After I finish welding in my notch in I'll box the frame and check for leaks. I'm pretty excited to have a trick air tank hidden in the frame. Especially with my plans for a flat bed. My frame easily visible. Here's some of my progress. Attachment 1038328 This is the swiss cheese that I started with. Attachment 1038329 Rear end and cross members stripped out. Attachment 1038330 The big hole left in the center here is the factory hole behind the leaf spring mount. It's made to let all the gunk pass through and not get caught in the frame and create a moisture trap. But it still had a bit too much of the metal eaten away so I had to cut out the surrounding area back to wear the metal was nice and thick and patch it in. Attachment 1038331 The hole. Attachment 1038332 My patch cut from the cross member that I ripped out. |
All times are GMT -4. The time now is 10:33 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com