Re: lets see your trick mods and custom touches!!
I have a ton of em, but the truck is in a million pieces right now, so very few have any pics. Here's my instrument cluster, that's done for sure.
http://img.photobucket.com/albums/v3...e/IMG_0508.jpg And my engine, It doesn't look quite like it used to. http://img.photobucket.com/albums/v3...e/IMG_1623.jpg http://img.photobucket.com/albums/v3...e/IMG_1624.jpg |
Re: lets see your trick mods and custom touches!!
1 Attachment(s)
New seat ,carpet and stereo.It has 3 1/2 in the ac vents{got the idea here]
6 1/2 in the doors and 2 10 in kickers under the seat with a kicker amp.Had to build my own boxes to do this.They are not pretty but they sound good. It has blue led lights in the vent spks.and 2 blue led lights under the seat. Just need to hide a few more wires. |
Re: lets see your trick mods and custom touches!!
Boogie,
Do you have pics of your speaker boxes? Chad |
Re: lets see your trick mods and custom touches!!
muddpile what trans are you runnin
|
Re: lets see your trick mods and custom touches!!
5 Attachment(s)
Not super elaborate, but here are a few of mine.
Dash - Stock speedo, Gas gauage from a LaSabre, Tach, and VDO Guages across the bottom. I need to finish the paint on the bezel Filled in all the holes I don't need on the firewall. Eventually It'll have aftermarket AC/heat. Also used serpentine belt setup from 94 C1500. Stock filler neck filled in and tank relocated to rear. Using an 88-98 style filler door for the stock 72 Blazer tank. I figure it will look a whole lt better once paint is on and everything is put back together.:cool: ;) |
Re: lets see your trick mods and custom touches!!
1 Attachment(s)
I think those ports look cool, but I think its a little to much with them and all those badges at the same time
|
Re: lets see your trick mods and custom touches!!
Thanks Lo - I was thinking about doing just that. When I mocked them up, I was running my 18's and bags were flat, it looked killer with the hood up or down. These inputs help, thanks for the photo-shop. Don't want to it to look like a toy or anything.
|
Re: lets see your trick mods and custom touches!!
1 Attachment(s)
This may not amount to much in the way of mods, but it will get comments and is easy and relatively cheap. I have a small stash of stainless steel bolts, washers, nuts etc. in the shop, and any time I take out a highly visible bolt like in the eng compartment, I put back a polished SS piece.
This polishing can be done in an electric drill mounted in a vise, but a drill press is easier. Just chuck up the bolt, use a file to cut the logo/markings on the head, then go to a course grit sand paper, med., fine, then use your favorite metal polish for the mirror finish. The only caveat here is, if you're using a SS nut on a SS bolt, you must use never-sieze or the threads are likely to gall. |
Re: lets see your trick mods and custom touches!!
1 Attachment(s)
Deck in the glove box last year.
|
Re: lets see your trick mods and custom touches!!
Paaw, the trans is a TH350 that was rebuilt 1000 miles before I bought it. It has a stage 2 shift kit in it, and the stock stall converter.
Slomotion, I did the same thing with all my hardware, and in my opinion it is a very worthwhile mod. |
Re: lets see your trick mods and custom touches!!
1 Attachment(s)
Here's mine. It's about the only thing on my truck that is custom.:lol:
|
Re: lets see your trick mods and custom touches!!
Lots of awesome mods!
|
Re: lets see your trick mods and custom touches!!
4 Attachment(s)
MInor stuff, but it's all my doing...
Suburban seat adjustable height seatbelts AutoMeter gauges Compas/Temp mirror |
Re: lets see your trick mods and custom touches!!
4 Attachment(s)
Removed bumper, installed blazer tank, routed the exhaust (copied GMAN)
Built custom roll pan to go fender-to-fender (vs. under the tailgate kind) Created trash screen using Home Depot mesh **and one that I have no photo of is....installed the interior dome light from an 2002 F-250 (has center and two maplights) |
Re: lets see your trick mods and custom touches!!
Quote:
Quote:
|
Re: lets see your trick mods and custom touches!!
Hey Putter, you have a pic of underneath the cowl vent? I'd like to know how you mounted the screen? Thanks.
|
Re: lets see your trick mods and custom touches!!
Quote:
-Andy |
Re: lets see your trick mods and custom touches!!
WOAH HUGGER!! Thats some 56 chevy stylin there!! Thats awsome!!!! Did you make a build thread when you did that? Thats killer!
Justin |
Re: lets see your trick mods and custom touches!!
1 Attachment(s)
here's my trick mod....it only took about 30 seconds to do
|
Re: lets see your trick mods and custom touches!!
2 Attachment(s)
Kinda low-tech and easy. I mounted 2 pairs of Pilot brand fog & driving lights (one pair clear, one amber) in my bumper marker light holes. Yes, its on a 4x4 but I think it would look good a lowered rig too.
|
Re: lets see your trick mods and custom touches!!
^Awesome pic! :metal:
|
Re: lets see your trick mods and custom touches!!
Quote:
|
Re: lets see your trick mods and custom touches!!
1 Attachment(s)
Attachment 245609
HERE'S ONE OF THE THINGS I DID. WELDED IN A ROLL PAN, FAB'D A LICENSE PLATE BOX, AND THEN WELDED IT IN AS SLANTED AS I COULD POSSIBLY GET IT SLANTED. JUST ENOUGH TO CATCH SOMEBODY'S EYE I HOPE. ONCE I GET A 1967 LICENSE PLATE FRAME, AND MY VANITY PLATE FOR IT THIS SUMMER SOMETIME, IT WILL ALL COME TOGETHER. (LOVED THE HANK WILLIAMS JR. BUMPER STICKER ON THE PREVIOUS POST, AWESOME!!:lol: ) |
Re: lets see your trick mods and custom touches!!
5 Attachment(s)
Here is the cup holder in my old truck.
My new truck will be even cooler. :metal: |
Re: lets see your trick mods and custom touches!!
Quote:
|
All times are GMT -4. The time now is 10:00 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com