Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Will I see you at Autorama this year?
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Quote:
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
This dang truck looks so freaking familiar. The timeframe is all wrong for the one I'm thinking of jt this one could be its twin. Plus, we both live in Burnet. Ok, I have to ask, it wasn't JR Box ya loaned to truck to as a kid was it.??!
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Quote:
About the only time this truck pounded the Burnet pavement was over 15 years ago when we would come down to visit. |
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Ahh, I see. I went to school with a guy, had one damn near identical. Early 90s. Mine is similar, although in a million pieces. 72 Cheyenne Super. Med Olive/White/Med Olive.
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Put in an order with GMC Pauls and got these patch panels, inner rockers with floor extensions, kick panels, cab corners and lower A pillar patches.
http://i722.photobucket.com/albums/w...psyhhcidhh.jpg Started stripping the cab down, http://i722.photobucket.com/albums/w...ps83571fbe.jpg http://i722.photobucket.com/albums/w...ps10ad2b23.jpg http://i722.photobucket.com/albums/w...ps910593f9.jpg Got the cab stripped down and then decided I would lift the cab. Since my lift was 200 miles away at a buddy's shop in Houston, I had to make do. Used a porta power and some wood and bricks got it raised high enough to clear the frame rails. Slid a 2x4 and a 2x6 under the cab and put some pushrods between the boards and slid it off the frame. http://i722.photobucket.com/albums/w...ps7d8ed234.jpg http://i722.photobucket.com/albums/w...ps422e17bb.jpg http://i722.photobucket.com/albums/w...psfe2de026.jpg Sketchy, I know, but it worked and there was no trip to the emergency room. Found some 8" swivel casters laying around and whipped out a cab dolly out of the lumber used for sliding the cab off the frame. http://i722.photobucket.com/albums/w...ps107aab54.jpg http://i722.photobucket.com/albums/w...ps67caa5b8.jpg Moves around pretty easy and should really be nice once I get it to the garage to work on. So since I was on a roll I hooked up the riding mower to see if it would tow it. lol http://i722.photobucket.com/albums/w...ps05cd3e69.jpg And that will pretty much be my last update until after the first of the year, I have to take my ship up to Charleston SC for a shipyard period and that will go up through Christmas. Probably won't be home until well after the new year. |
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
BWAHAHHHAHAA!!!!!:lol::lol::lol: You ROCK Jarrod!!!! You still made progress so that's a good thing, so is not going to the emergency room!
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Not much progress as far as actual work getting done, ended up missing the whole holiday season and just got back home last weekend for a few days. But on the up side I made a few dollars. That allowed me to start stacking more parts, contacted Travis at AZ Pro Performance and placed my order for an entire Porterbuilt Extreme kit.
Front to back kit with everything including the Baer big brake kit and the new 24 x 15 rear dropmember. Also snagged the PB bolt on body drop kit to get me that much lower to the ground. I know it will be at least April before the PB stuff starts to ship, but I'm super excited.:metal: Bought a pretty sweet interior out of a friends truck that he was selling so that puts me ahead on the interior side of things. (thanks David). I will continue to tear the truck down and put the pieces in storage before I actually start any restoration work. So I started taking the bed apart and should get that finished this weekend. Some pics... http://i722.photobucket.com/albums/w...ps4ce18572.jpg http://i722.photobucket.com/albums/w...psfb1adc3b.jpg http://i722.photobucket.com/albums/w...psc176c8e8.jpg |
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
I just found this one... read the story on it... Great job... Keep up the great work...
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Quote:
Semi productive weekend: Finally got the bed disassembled and removed, gonna cut out a few bed floor cross sills and trash the rest of the steel bed floor. Raised wood floor is the plan after the PB rear suspension is in. http://i722.photobucket.com/albums/w...psa779cb23.jpg The goal is to remove everything from the frame rails and prep the rails for the new suspension. So I've been grinding factory rivets and removing brackets and cross members. http://i722.photobucket.com/albums/w...ps961b142c.jpg http://i722.photobucket.com/albums/w...pse01264db.jpg http://i722.photobucket.com/albums/w...ps457b66b9.jpg http://i722.photobucket.com/albums/w...pscb003725.jpg And here's where I stopped for the weekend, only 6 more rivets and a few bolts and it will be stripped from the transmission back. http://i722.photobucket.com/albums/w...psb31ca1dd.jpg http://i722.photobucket.com/albums/w...ps8af1755f.jpg |
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Great looking start and good story.
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
That's some really good progress on it!!! Keep at it!!!:metal:
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Managed to get all the stock suspension removed front to rear. About the only thing I'll be re-using is the rear end. Front cross member is loose and engine perches are loose, I just need to get my engine hoist and trailer so I can remove the engine and trans and take it to storage. It'll take a couple of trips to the storage unit to get my back yard cleaned up again. Getting closer though.
http://i722.photobucket.com/albums/w...ps532ea417.jpg |
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Nice progress on the tear down process.
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
LST CRUNCH!!!! Hahahhaa. See you this weekend dude, I'm bringin my poncho and some refreshing adult beverages!! :metal:
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Quote:
Quote:
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Been too long since an update, progress has been slow but is starting to pick up.
Got my Baer brake stuff from Travis at AZ Pro Performance when he came to LST and started modifying the McGaughy spindles to accept the Baer discs and 14" rotors. Rear Pads, http://i722.photobucket.com/albums/w...psomh92y4m.jpg Billet hubs, http://i722.photobucket.com/albums/w...psyim4sems.jpg Rear calipers and bracketry, http://i722.photobucket.com/albums/w...psjoh9lrx8.jpg McGaughy 2 1/2" drop spindles http://i722.photobucket.com/albums/w...psexnqelaw.jpg Front caliper and mounting bracket http://i722.photobucket.com/albums/w...pskmqbztpo.jpg To fit the calipers on these spindles I had to drill and tap a couple of holes and cut & grind down some spindle material for everything to clear. Nothing like taking a brand new part out of the box and cutting it up. http://i722.photobucket.com/albums/w...psjpzwilwo.jpg http://i722.photobucket.com/albums/w...pspt78oki7.jpg Top spindle is modified, bottom is as received. http://i722.photobucket.com/albums/w...psbtzon4uk.jpg Mounting bracket in place: http://i722.photobucket.com/albums/w...pspta6df4e.jpg Caliper mounted to new spindle http://i722.photobucket.com/albums/w...psiiwmsohq.jpg The question was asked by a friend about removing that much material, how strong would the spindle be when you applying the brakes? This is a pic of the pieces I cut from the new spindle to mount the new caliper. The piece on the left shows the thickness of material in current mounting location, the piece on the right is the original caliper mounting area. I measured the two areas, original is 9mm thick and new mount thickness is 20mm thick. So the thickness is more than double at the new location. http://i722.photobucket.com/albums/w...psaeq3etza.jpg |
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Still have parts coming in, new rack and pinion, u-joints and steering shaft.
http://i722.photobucket.com/albums/w...psqtx4zzqq.jpg Ridetech shocks. http://i722.photobucket.com/albums/w...ps1ykfxpig.jpg And a new T-shirt. :lol: http://i722.photobucket.com/albums/w...psqtx4zzqq.jpg Gas fill hole delete plate and bed stake pocket delete plates. http://i722.photobucket.com/albums/w...pswuhjizx0.jpg Engine and transmission finally pulled from the frame and headed to the storage unit. http://i722.photobucket.com/albums/w...psyhiudhpn.jpg http://i722.photobucket.com/albums/w...psq2mlvhvr.jpg And the frame is split finally. http://i722.photobucket.com/albums/w...ps8uvi8trc.jpg |
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
I finally got time to stop by and see my buddy David (Slick67) and his '72 blazer project. He's removed the top and converted the front end over to a '67 and is making great progress.
http://i722.photobucket.com/albums/w...pskhid2trx.jpg Picked up my interior from him while I was there, a couple of pics but I never took any of the seats. I loved the interior in Slick and had to have it when David began parting out the truck. :metal: http://i722.photobucket.com/albums/w...ps0lq0qyto.jpg http://i722.photobucket.com/albums/w...psgf9hht4a.jpg I decided I want to go with a front roll pan so I got in touch with Grant Kustoms and they are making me the front roll pan and fender cups. The fender cups extend the front edge of the fenders down 2 inches to make up the gap when the truck is laid out. Hopefully it will look similar to this one. http://i722.photobucket.com/albums/w...ps8koqqtnn.jpg |
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Started patching the holes in my high hump cover that I picked up from NLPED here on the board, only got one pic of the fit up but I had several holes to fill and a couple of patches to make.
http://i722.photobucket.com/albums/w...psgplv7ins.jpg http://i722.photobucket.com/albums/w...pssp5trzud.jpg Cut the floor out and still have to get the fit right. The seam between the floor pan and toeboard was off about 3/16" from the factory. With carpet in place you would never notice, but trying to fit the hump in it was really throwing things out of whack. So I drilled out the factory spot welds at the seam and repositioned it. http://i722.photobucket.com/albums/w...psukct6hie.jpg http://i722.photobucket.com/albums/w...psf4qrivsp.jpg More pics as I work through the fit up. |
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
The gas tank is removed so it's time to fill the hole.
http://i722.photobucket.com/albums/w...pscj8m1kir.jpg Patch panel in and welded. http://i722.photobucket.com/albums/w...pspwkhrbqg.jpg Lots of grinding later and it doesn't look too bad, a thin coat of filler and it will look perfect. I'm no body man so I will just do the best I can with it!:lol: http://i722.photobucket.com/albums/w...psqsg5fq6g.jpg |
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Well operation cancer removal started this weekend! I knew I had patch panels to install but did not expect to be replacing cab support sections.
Oh well, more parts on order from GMC Paul's and it has become painfully obvious that I'm gonna have to invest in a sand blaster ( local guy went out of business!).... Pulled the drivers door off and started working on the rocker panel, floor section, cab corner and anything else that looked like crap. There's plenty that looks like crap.:waah: Pics: http://i722.photobucket.com/albums/w...psx0djzqpz.jpg http://i722.photobucket.com/albums/w...psctnkybsh.jpg http://i722.photobucket.com/albums/w...ps1omxvt13.jpg I have the patch panel to replace the section of the front door pillar that's bad. http://i722.photobucket.com/albums/w...psj2ohll3g.jpg The rear door pillar looked bad so I ordered one for each side. Hopefully make it in this week. http://i722.photobucket.com/albums/w...pspgo1hkfq.jpg I just had to stick my NOS rocker panel up there to see how well it fit. It fit so good I wish I could have just welded it up and been done with it, but I have too much rust to remove first. http://i722.photobucket.com/albums/w...psihujkbia.jpg Back to reality, I cropped off the lower section of the front door pillar. http://i722.photobucket.com/albums/w...psf7ducxsd.jpg Pretty crappy looking inside. http://i722.photobucket.com/albums/w...psays7g3mk.jpg Back side of the front door pillar that I cut out. http://i722.photobucket.com/albums/w...psgztrst8w.jpg Footwell is gonna need a patch, I have one just have to cut out the bad stuff. http://i722.photobucket.com/albums/w...ps19rue91z.jpg Most of the bad stuff cut out, going to leave the bad cab supports in place for now so I don't get the cab too far out of alignment. I do have cross bracing installed but feel better leaving the supports just not welding to them. I'll weld the panels to the new ones when they are installed. http://i722.photobucket.com/albums/w...pskv2aj9cp.jpg http://i722.photobucket.com/albums/w...pslqhcil5a.jpg http://i722.photobucket.com/albums/w...psy64dbv79.jpg Got the floor section fit in and welded, still have a ton of grinding to do. The front portion of the panel didn't align too well with the firewall so I cut it off and will fab a section and weld it in later. http://i722.photobucket.com/albums/w...psdt3oxnol.jpg http://i722.photobucket.com/albums/w...psdt3oxnol.jpg http://i722.photobucket.com/albums/w...psc3kxwj7m.jpg That's all until next week.:chevy: |
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Keep up the good work. love the nice parts you are using , going to be an awesome truck when finished. im following along for the ride ;)
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Well that only took me 2 hours to get updated!!!!:lol: That is some really great progress there. Your rust delete is going well!!!
|
Re: Project: "ResuWrecktion" '71 Custom Deluxe C-10
Quote:
Quote:
Gonna pick up a cheap Harbor Freight sand blast pot this week and see if I can put it to use this weekend. Probably have to go buy a compressor too. :lol: |
All times are GMT -4. The time now is 06:35 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com